Electron density retrieval from occulting GNSS signals using a gradient-aided inversion technique

In the coming years, opportunities for remote sensing of electron density in the Earth’s ionosphere will expand with the advent of Galileo, which will become part of the global navigation satellite system (GNSS). Methods for accurate electron density retrieval from radio occultation data continue to improve. We describe a new method of electron density retrieval using total electron content measurements obtained in low Earth orbit. This method can be applied to data from dual-frequency receivers tracking the GPS or Galileo transmitters. This simulation study demonstrates that the method significantly improves retrieval accuracy compared to the standard Abel inversion approach that assumes a spherically symmetric ionosphere. Our method incorporates horizontal gradient information available from global maps of Total Electron Content (TEC), which are available from the International GNSS Service (IGS) on a routine basis. The combination of ground and space measurements allows us to improve the accuracy of electron density profiles near the occultation tangent point in the E and F regions of the ionosphere.     

Genesis and preservation of a uranium-rich paleozoic epithermal system with a surface expression (Northern Flinders Ranges, South Australia): radiogenic heat driving regional hydrothermal circulation over geological timescales

The surface expressions of hydrothermal systems are prime targets for astrobiological exploration, and fossil systems on Earth provide an analogue to guide this endeavor. The Paleozoic Mt. Gee-Mt. Painter system (MGPS) in the Northern Flinders Ranges of South Australia is exceptionally well preserved and displays both a subsurface quartz sinter (boiling horizon) and remnants of aerial sinter pools that lie in near-original position. The energy source for the MGPS is not related to volcanism but to radiogenic heat produced by U-Th-K-rich host rocks. This radiogenic heat source drove hydrothermal circulation over a long period of time (hundreds of millions of years, from Permian to present), with peaks in hydrothermal activity during periods of uplift and high water supply. This process is reflected by ongoing hot spring activity along a nearby fault. The exceptional preservation of the MGPS resulted from the lack of proximal volcanism, coupled with tectonics driven by an oscillating far-field stress that resulted in episodic basement uplift. Hydrothermal activity caused the remobilization of U and rare earth elements (REE) in host rocks into (sub)economic concentrations. Radiogenic-heat-driven systems are attractive analogues for environments that can sustain life over geological times; the MGPS preserves evidence of episodic fluid flow for the past ～300 million years. During periods of reduced hydrothermal activity (e.g., limited water supply, quiet tectonics), radiolytic H(2) production has the potential to support an ecosystem indefinitely. Remote exploration for deposits similar to those at the MGPS systems can be achieved by combining hyperspectral and gamma-ray spectroscopy.     

A Digital Map Set for the Night Attack Aircraft

There has been much interest recently in applying cartographic digital data bases to advanced avionics systems as a solution to specific problems associated with night attack aircraft missions. The tremendous computer horsepower required to accomplish this task in real-time in an airborne environment is well documented. Hardware implementation of complex algorithms traditionally has produced custom devices which accomplish a specific function on a specific data structure. Historically, this has resulted in powerful but inflexible systems incapable of adapting to the changing requirements of military missions. In an age of evolving technology, these pitfalls must be avoided by incorporating expected changes into the design of digital map systems. If they are made to accommodate a variety of cartographic data bases and allow for programmable manipulation of those bases, this new class of digital map sets can be reconfigured at the software level to meet the changing requirements of aircraft missions. This paper addresses current design concepts for such a map system on a Night Attack aircraft. The focus is on issues concerning the development and handling of existing map data products to meet current system requirements. This system, called the Digital Map Set (DMS), is being designed to accomplish the classical manipulations of Defense Mapping Agency Digital Land Mass System data. Additionally, aeronautical charts, aerial reconnaissance photos, flight plan data, and other two-dimensional bit mapped graphics also are accommodated. Mission requirements relating to the cartographic data bases shall be discussed along with ground support station and airborne system design issues.     

The Phoenix signal detection system

The Phoenix system is based on that developed for the Targeted Search element of the former NASA High Resolution Microwave Survey (HRMS). The Phoenix system was used at the Parkes 64 m and Mopra 22 m antennas of the Australian Telescope National Facility in the first part of 1995. The system consists of: (1) an RF/IF subsystem providing 1–3 GHz coverage; (2) a search subsystem with a 20 MHz, dual-polarization search bandwidth; (3) a two-site, pseudo-interferometric follow-up subsystem that reobserves interesting signals found by the search subsystem; and (4) a control subsystem capable of automatic searching.     

Laminar dust flames in a reduced-gravity environment

The propagation of laminar dust flames in suspensions of iron in gaseous oxidizers was studied in a low-gravity environment onboard a parabolic flight aircraft. The reduction of buoyancy-induced convective flows and particle settling permitted the measurement of fundamental combustion parameters, such as the burning velocity and the flame quenching distance over a wide range of particle sizes and in different gaseous mixtures. Experimentally measured flame speeds and quenching distances were found in good agreement with theoretical predictions of a simplified analytical model that assumes particles burning in a diffusive mode. However, the comparison of flame speeds in oxygen–argon and oxygen–helium iron suspensions indicates the possibility that fine micron-sized particles burn in the kinetic mode. Furthermore, when the particle spacing is large compared to the scale of the reaction zone, a theoretical analysis suggests the existence of a new so-called discrete flame propagation regime. Discrete flames are strongly dependent on particle density fluctuations and demonstrate directed percolation behavior near flame propagation limits. The experimental observation of discrete flames in particle suspensions will require low levels of gravity over extended periods available only on orbital platforms.     

Carbon balance in bioregenerative life support systems: some effects of system closure, waste management, and crop harvest index.

In Advanced Life Support (ALS) systems with bioregenerative components, plant photosynthesis would be used to produce O2 and food, while removing CO2. Much of the plant biomass would be inedible and hence must be considered in waste management. This waste could be oxidized (e.g., incinerated or aerobically digested) to resupply CO2 to the plants, but this would not be needed unless the system were highly closed with regard to food. For example, in a partially closed system where some of the food is grown and some is imported, CO2 from oxidized waste when combined with crew and microbial respiration could exceed the CO2 removal capability of the plants. Moreover, it would consume some O2 produced from photosynthesis that could have been used by the crew. For partially closed systems it would be more appropriate to store or find other uses for the inedible biomass and excess carbon, such as generating soils or growing woody plants (e.g., dwarf fruit trees). Regardless of system closure, high harvest crops (i.e., crops with a high edible to total biomass ratio) would increase food production per unit area and O2 yields for systems where waste biomass is oxidized to recycle CO2. Such interlinking effects between the plants and waste treatment strategies point out the importance of oxidizing only that amount of waste needed to optimize system performance.     

Phytochromes play a role in phototropism and gravitropism in Arabidopsis roots.

Phototropism as well as gravitropism plays a role in the oriented growth of roots in flowering plants. In blue or white light, roots exhibit negative phototropism, but red light induces positive phototropism in Arabidopsis roots. Phytochrome A (phyA) and phyB mediate the positive red-light-based photoresponse in roots since single mutants (and the double phyAB mutant) were severely impaired in this response. In blue-light-based negative phototropism, phyA and phyAB (but not phyB) were inhibited in the response relative to the WT. In root gravitropism, phyB and phyAB (but not phyA) were inhibited in the response compared to the WT. The differences observed in tropistic responses were not due to growth limitations since the growth rates among all the mutants tested were not significantly different from that of the WT. Thus, our study shows that the blue-light and red-light systems interact in roots and that phytochrome plays a key role in plant development by integrating multiple environmental stimuli.     

Radio emission from EA eclipsing binaries: Evidence for kilogauss early- and late-type stars

Space Science Reviews -