Observational Aspects of Particle Acceleration in Large Solar Flares

Solar flares efficiently accelerate electrons to several tens of MeV and ions to 10 GeV. The acceleration is usually thought to be associated with magnetic reconnection occurring high in the corona, though a shock produced by the Coronal Mass Ejection (CME) associated with a flare can also accelerate particles. Diagnostic information comes from emission at the acceleration site, direct observations of Solar Energetic Particles (SEPs), and emission at radio wavelengths by escaping particles, but mostly from emission from the chromosphere produced when the energetic particles bombard the footpoints magnetically connected to the acceleration region. This paper provides a review of observations that bear upon the acceleration mechanism.     

基于电磁流体动力搅拌器的微流道混合研究

对于许多微流体装置来说,流体的混合是至关重要的。为了实现微流体混合控制,对基于电磁流体动力学原理的微流道主动混合控制方法进行了研究。该方法中使用了一个混合室,在动态洛伦兹力的作用下,混合室内流体往复周期的运动。流体速度的周期性变化使流体分界面折叠,从而使流体接触面增加。用CCD记录设备记录了流体的快速混合过程,并对流体的混合程度进行定量分析。     

Lunette: A network of lunar landers for in-situ geophysical science

Over the last 3 years, a team at JPL has worked to design a new concept for a small, low cost lander applicable to a variety of in-situ lunar exploration activities. This concept, named Lunette, originated as a design which would exploit potential excess capacity of EELV launches by being compatible with the EELV Secondary Payload Adapter (ESPA). The original Lunette mission concept would have allowed up to six low cost landers to be delivered to a targeted region of the moon, with landings separated by a few km, allowing establishment of a regional network with a single, shared launch. The original concept faced limits in the extent of regional distribution of landing sites since all six landers were dependent on a single solid rocket braking motor. In the last year the Lunette team has focused on a modification of the original ESPA-based concept to a design that would allow launch of multiple individual landers (each with its own braking stage) on a single launch vehicle, where each lander would be capable of independent targeting and landing. With such an implementation, the entire lunar surface could be accessed for establishment of network nodes that could enable high priority geophysical measurements on a scale not seen since Apollo. The present paper discusses the current state of the design of the Lunette geophysical network lander, as well as describing mission design, science operations, and an innovative design solution allowing the lander to take critical data continuously, even over the lunar night, without the need for radioisotope power systems.     

A feasibility study for the detection of the diurnal variation of tropospheric NO2 over Tokyo from a geostationary orbit

We have conducted a feasibility study for the geostationary monitoring of the diurnal variation of tropospheric NO₂ over Tokyo. Using NO₂ fields from a chemical transport model, synthetic spectra were created by a radiative transfer model, SCIATRAN, for summer and winter cases. We then performed a Differential Optical Absorption Spectroscopy (DOAS) analysis to retrieve NO₂ slant column densities (SCDs), and after converting SCDs into vertical column densities (VCDs), we estimated the precision of the retrieved VCDs. The simulation showed that signal-to-noise ratio (SNR) ? 500 is needed to detect the diurnal variation and that SNR ? 1000 is needed to observe the local minimum occurring in the early afternoon (LT13–14) in summer. In winter, the detection of the diurnal variation during LT08–15 needs SNR ? 500, and SNR ? 1000 is needed if early morning (LT07) and early evening (LT16) are included. The currently discussed sensor specification for the Japanese geostationary satellite project, GMAP-Asia, which has a horizontal resolution of 10 km and a temporal resolution of 1hr, has demonstrated the performance of a precision of several percent, which is approximately corresponding to SNR = 1000–2000 during daytime and SNR ? 500 in the morning and evening. We also discuss possible biases caused by the temperature dependence of the absorption cross section utilized in the DOAS retrieval, and the effect of uncertainties of surface albedo and clouds on the estimation of precisions.     

一种大变形多空间域连续体结构拓扑优化方法

针对大变形非线性结构拓扑优化问题,提出了基于混合细胞自动机(HCA, Hybrid Cellular Automata)多空间域连续体结构拓扑优化方法;采用密度法,建立了单元相对密度表示的材料弹-塑性模型;以单元相对密度和应变能作为细胞自动机(CA,Cellular Automata)的状态信息,利用CA局部控制规则,修改相对密度,迭代实现各设计空间域应变能均匀分布;设计了多空间域拓扑优化HCA算法,采取多个对象同时耦合优化迭代,各自收敛策略,解决了多空间域优化迭代算法收敛稳定性问题;最后,以汽车保险杆结构横梁和支撑等两个设计空间为例,施加大变形动态载荷作用,对提出的多空间结构优化算法进行了验证,优化后结构有效地降低了碰撞作用力峰值达54％,提高了结构安全性.     

Plasmaspheric Density Structures and Dynamics: Properties Observed by the CLUSTER and IMAGE Missions

Plasmaspheric density structures have been studied since the discovery of the plasmasphere in the late 1950s. But the advent of the Cluster and Image missions in 2000 has added substantially to our knowledge of density structures, thanks to the new capabilities of those missions: global imaging with Image and four-point in situ measurements with Cluster. The study of plasma sources and losses has given new results on refilling rates and erosion processes. Two-dimensional density images of the plasmasphere have been obtained. The spatial gradient of plasmaspheric density has been computed. The ratios between H⁺, He⁺ and O⁺ have been deduced from different ion measurements. Plasmaspheric plumes have been studied in detail with new tools, which provide information on their morphology, dynamics and occurrence. Density structures at smaller scales have been revealed with those missions, structures that could not be clearly distinguished before the global images from Image and the four-point measurements by Cluster became available. New terms have been given to these structures, like “shoulders”, “channels”, “fingers” and “crenulations”. This paper reviews the most relevant new results about the plasmaspheric plasma obtained since the start of the Cluster and Image missions.     

Technology readiness and risk assessments: A new approach

Systems that depend upon the application of new technologies inevitably face three major challenges during development: performance, schedule and budget. Technology research and development (R&D) programs are typically advocated based on argument that these investments will substantially reduce the uncertainty in all three of these dimensions of project management. However, if early R&D is implemented poorly, then the new system developments that plan to employ the resulting advanced technologies will suffer from cost overruns, schedule delays and the steady erosion of initial performance objectives. It is often critical for senior management to be able to determine which of these two paths is more likely—and to respond accordingly. The challenge for system and technology managers is to be able to make clear, well-documented assessments of technology readiness and risks, and to do so at key points in the life cycle of the program.Several approaches have been used to evaluate technology maturity and risk in order to better anticipate later system development risks. The “technology readiness levels” (TRLs), developed by NASA, are one discipline-independent, programmatic figure of merit (FOM) that allows more effective assessment of, and communication regarding the maturity of new technologies. Another broadly used management tool is of the “risk matrix”, which depends upon a graphical representation of uncertainty and consequences. However, for the most part these various methodologies have had no explicit interrelationship.This paper will examine past uses of current methods to improve R&D outcomes and will highlight some of the limitations that can arise. In this context, a new concept for the integration of the TRL methodology, and the concept of the “risk matrix” will be described. The paper will conclude with observations concerning prospective future directions for the important new concept of integrated “technology readiness and risk assessments”.     

Technology readiness assessments: A retrospective

The development of new system capabilities typically depends upon the prior success of advanced technology research and development efforts. These systems developments inevitably face the three major challenges of any project: performance, schedule and budget. Done well, advanced technology programs can substantially reduce the uncertainty in all three of these dimensions of project management. Done poorly, or not at all, and new system developments suffer from cost overruns, schedule delays and the steady erosion of initial performance objectives. It is often critical for senior management to be able to determine which of these two paths is more likely—and to respond accordingly. The challenge for system and technology managers is to be able to make clear, well-documented assessments of technology readiness and risks, and to do so at key points in the life cycle of the program.In the mid 1970s, the National Aeronautics and Space Administration (NASA) introduced the concept of “technology readiness levels” (TRLs) as a discipline-independent, programmatic figure of merit (FOM) to allow more effective assessment of, and communication regarding the maturity of new technologies. In 1995, the TRL scale was further strengthened by the articulation of the first definitions of each level, along with examples (J. Mankins, Technology readiness levels, A White Paper, NASA, Washington, DC, 1995. [1]). Since then, TRLs have been embraced by the U.S. Congress’ General Accountability Office (GAO), adopted by the U.S. Department of Defense (DOD), and are being considered for use by numerous other organizations. Overall, the TRLs have proved to be highly effective in communicating the status of new technologies among sometimes diverse organizations.This paper will review the concept of “technology readiness assessments”, and provide a retrospective on the history of “TRLs” during the past 30 years. The paper will conclude with observations concerning prospective future directions for the important discipline of technology readiness assessments.