可编程逻辑器件的设计与开发

概括介绍可编程逻辑器件CPLD的主要特点、EDA软件平台和VHDL开发语言。介绍在EDA软件平台的支持下,采用VHDL语言开发以可编程逻辑器件CPLD为核心的现代数字系统设计方法和开发设计流程。     

Estimation of risk based on multiple events in radiation carcinogenesis of rat skin.

In the multistage theory of carcinogenesis, cells progress to cancer through a series of discrete, irreversible, heritable genetic alterations or mutations. However data on radiation-induced cancer incidence in rat skin suggests that some part of an intermediate repairable alteration may occur. Data are presented on cancer induction in rat skin exposed to the following radiations: 1. an electron beam (LET=0.34 keV/um, 2. a neon ion beam (LET=25 keV/um and 3. an argon ion beam (LET=125 keV/um. The latter 2 beams were generated by the Bevalac at the Lawrence Berkeley Laboratory, Berkeley, CA. About 6.0 cm2 of skin was irradiated per rat. The rats were observed every 6 weeks for at least 78 weeks and tumors were scored at first occurrence. Several histological types of cancer, including squamous and basal cell carcinomas, were induced. The cancer yield versus radiation dose was fitted by the quadratic equation (Y(D)=CLD+BD2), and the parameters C and B were estimated for each type of radiation. Analysis of the DNA from the electron-induced carcinomas indicated that K-ras and/or c-myc oncogenes were activated in all tumors tested, although only a small proportion of neon-induced tumors showed similar activation. In situ hybridization indicated that the cancers contain subpopulations of cells with differing amounts of c-myc and H-ras amplification. The results are consistent with the idea that ionizing radiation produces carcinogenically relevant lesions via 2 repairable events at low LET and via a non-repairable, linked event pathway at high LET; either pathway may advance the cell by 1 stage in the multistage model. The model, if validated, permits the direct calculation of cancer risk in rat skin in a way that can be subjected to experimental testing.     

Measurement of middle atmospheric ozone density profile by rocket-borne radiometer onboard KSR-II

KSR-II, a two-stage sounding rocket of KARI was launched successfully at the Korean Peninsula on June 11, 1998. The apogee of the rocket was 137 km. For the ozone measurement, 8-channel UV and visible radiometers were onboard the rocket. The rocket measured an in situ stratospheric and mesospheric ozone density profile over Korea during its ascending phase using the radiometer and transmitted the data to ground station in real time. The maximum ozone density occurs near 25 km. Retrieved profile has a random error (1σ) of approximately 15% for altitude below 20km, 7% between 20-50 km and 10% greater than 50 km. The retrieved data were compared with Dobson spectrophotometer, ozonesonde, and HALOE onboard the UARS. Our results are in reasonable agreements with others.     

“自准”赝像及识别

置平面镜于凸透镜后,则凸透镜前焦平面上的物成像于该物平面上,即“自准”成像.满足其它条件也能成像于物平面.分析不同条件下像的形成及其特点,并给出识别自准成像的判据.     

某型客车噪声源的测试与研究

本文通过对某型客车的噪声测试分析，识别出该型客车的主要噪声源，为进一步采取有效的降噪措施提供了必要依据。     

基于容差分配的直升机多约束运动系统的应用与研究

本文以某民用直升机动力舱多约束运动系统的容差分配设计为例,阐述和分析了多约束运动系统容差基准的选取、分配以及设计补偿等。可以为多约束运动系统设计提供方法和参考。     

基于杂波对消-自聚焦的多通道SAR-GMTI

对超高频(UHF)波段多通道合成孔径雷达(SAR)动目标检测技术进行研究,解决了长相干积累时间导致动目标在方位向散焦严重的问题。采用分块自聚焦技术对多通道SAR地面移动目标指示(GMTI)系统自适应杂波抑制后的SAR图像进行处理,改善杂波抑制后的SAR图像中动目标的聚焦情况,增强动目标与周围剩余杂波的对比度,进而提高恒虚警率(CFAR)检测的性能。与传统杂波抑制后直接进行CFAR检测方法相比较,该方法降低了检测虚警概率。实测数据处理结果显示动目标的信杂比明显提高,动目标方位向聚焦成功,证明了该方法的有效性。     

基于CFD/CSD耦合的叶轮机叶片失速颤振计算

为了研究叶轮机叶片的失速颤振特性,发展了一种计算流体力学与计算结构力学(CFD/CSD)时域耦合方法。该方法通过每一物理时刻CFD和CSD的循环迭代实现了耦合计算。在CFD分析中,采用鲁棒性较好的空间离散格式AUSM+-UP,并基于延迟脱体涡模型(DDES)模拟了带分离流动。在结构分析中,通过模态法构建了旋转叶片动力学方程并运用杂交多步方法进行求解。以孤立转子Rotor37为例,计算了不同工况下流场总体与细节参数,与实验结果的对比验证了CFD算法的精度。对某转子叶片进行了颤振特性研究,计算所得的广义位移时间响应曲线表明该叶片在近失速工况下会发生失速颤振,其表现形式为一阶弯曲模态发散且各阶模态之间不耦合。分析表明,流场不稳定和非定常效应是引起失速颤振的关键因素,同时折合频率的降低也会导致原本气动弹性稳定的叶片发生失速颤振。     

不同接触形式下轮盘叶片系统的振动响应分析

以某压气机盘片系统为研究对象,基于ANSYS软件,建立了接触模型、接触不分离模型和刚性连接模型3种榫连结构接触约束形式下的盘片有限元模型,分别对3种模型进行了固有特性的分析,对比了三者的共振频率和振型;在离心力和气流激振力作用下,对3种模型进行了振动响应分析,得到三者的位移响应和应力随转速的变化规律。研究结果表明:接触模型和接触不分离模型的固有特性一致性较好,而刚性连接模型和接触模型在高频段存在较大差异。同时,刚性连接模型和接触不分离模型能够极大地改善接触模型在低转速下的收敛性。     

基于环形切割器的串联战斗部隔爆结构的优选

硬质聚氨酯具有刚度小、材质松散、易于吸收爆炸能量的特点,是一种很好的隔爆材料。为了设计环形切割器与后级随进战斗部之间的隔爆装置,利用LS-DYNA分别进行了圆柱型、圆锥型、球缺型3种聚氨酯隔爆体的数值模拟研究。通过研究得出结论:球缺型结构既节省材料,又可以更有效地降低前级产生的冲击波对后级战斗部的影响。该结论有助于带环形切割器串联战斗部的隔爆设计。