Theoretical study of flow ripple for an aviation axial-piston pump with damping holes in the valve plate

Based on the structure of a certain type of aviation axial-piston pump＇s valve plate which adopts a pre-pressurization fluid path （consisting a damping hole, a buffer chamber, and an orifice） to reduce flow ripple, a single-piston model of the aviation axial-piston pump is presented. This sin- gle-piston model comprehensively considers fluid compressibility, orifice restriction effect, fluid resistance in the capillary tube, and the leakage flow. Besides, the instantaneous discharge areas used in the single-piston model have been calculated in detail. Based on the single-piston model, a multi-piston pump model has been established according to the simple hydraulic circuit. The sin- gle- and multi-piston pump models have been realized by the S-function in Matlab/Simulink. The developed multi-piston pump model has been validated by being compared with the numerical result by computational fluid dynamic （CFD）. The effects of the pre-pressurization fluid path on the flow ripple and the instantaneous pressure in the piston chamber have been studied and opti- mized design recommendations for the aviation axial-piston pump have been given out.     

Three-dimensional Large Landing Angle Guidance Based on Two-dimensional Guidance Laws

 Both the design process and form of the three-dimensional (3D) suboptimal guidance law (3DSGL) are very complex. Therefore, we propose the use of two-dimensional (2D) guidance laws to meet the guidance requirements of 3D space. By analyzing the relationship between the flight-path angle and its projections on OXY and OXZ planes, we obtain the ideal design requirements of the guidance laws. Based on the requirements, we design a 2D suboptimal guidance law used in the horizontal plane; combining the 2D vertical suboptimal guidance law, we create a whole ballistic simulation of six degree-of-freedom. The results are compared with those using other three guidance modes in the case of large windage of the initial azimuth angle. When the proportional navigation guidance (PNG) law is used in the horizontal planes, the landing angle will obviously decrease. With the proposed guidance mode, the large landing angle can be realized and meet the guidance precision requirements. Moreover, the required overload can decrease to meet the control requirement. The effects of the proposed guidance mode are close to that of 3DSGL despite its very simple form.     

“嫦娥一号”卫星观测近月太阳风离子特征

"嫦娥一号"卫星的太阳风离子探测器(SWIDs)的科学目标是研究太阳风与月球的相互作用以及相应的近月空间等离子体环境。文章利用"嫦娥一号"卫星SWIDs探测器在2007年12月30日的观测数据对近月太阳风等离子体环境,包括向阳侧太阳风离子、"拾起"离子以及在月球尾迹边界处的太阳风离子的特征进行分析,得到以下主要观测结果:1)在慢速太阳风中观测到双峰结构,分别为太阳风中的氢离子和二价氦离子;2)在行星际磁场具有明显昏向(+By)分量期间,在月球向阳侧持续观测到有月表散射或反射后被拾起的太阳风离子;3)与入射的太阳风离子不同,这些拾起的太阳风离子具有明显的角度分布特征;4)在行星际磁场昏向(晨向)期间,太阳风中的氢离子在月球尾迹北半球的边界处呈现减速(加速)特征并进入尾迹;而并未发现氦离子进入尾迹的特征。"嫦娥一号"卫星的这些观测数据对于认识近月空间等离子体环境有着重要的意义。     

Matching design of hydraulic load simulator with aerocraft actuator

 This paper intends to provide theoretical basis for matching design of hydraulic load simulator (HLS) with aerocraft actuator in hardware-in-loop test, which is expected to help actuator designers overcome the obstacles in putting forward appropriate requirements of HLS. Traditional research overemphasizes the optimization of parameters and methods for HLS controllers. It lacks deliberation because experimental results and project experiences indicate different ultimate performance of a specific HLS. When the actuator paired with this HLS is replaced, the dynamic response and tracing precision of this HLS also change, and sometimes the whole system goes so far as to lose control. Based on the influence analysis of the preceding phenomena, a theory about matching design of aerocraft actuator with HLS is presented, together with two paired new concepts of "Standard Actuator" and "Standard HLS". Further research leads to seven important conclusions of matching design, which suggest that appropriate stiffness and output torque of HLS should be carefully designed and chosen for an actuator. Simulation results strongly support that the proposed principle of matching design can be anticipated to be one of the design criteria for HLS, and successfully used to explain experimental phenomena and project experiences.     

An experimental study of the dual-loop control of electro-hydraulic load simulator （EHLS）

This paper investigates motion coupling disturbance（the so called surplus torque）in the hardware-in-the-loop（HIL）experiments.The＇＇velocity synchronization scheme＇＇was proposed by Jiao for an electro-hydraulic load simulator（EHLS）in 2004.In some situations,however,the scheme is limited in the implementation for certain reasons,as is the case when the actuator＇s valve signal is not available or it is seriously polluted by noise.To solve these problems,a＇＇dual-loop scheme＇＇is developed for EHLS.The dual-loop scheme is a combination of a torque loop and a position synchronization loop.The role of the position synchronization loop is to decouple the motion disturbance caused by the actuator system.To verify the feasibility and effectiveness of the proposed scheme,extensive simulations are performed using AMESim.Then,the performance of the developed method is validated by experiments.     

Low-cost precise measurement of oscillator frequency instability based on GNSS carrier observation

Global navigation satellite systems (GNSS) receivers can be used in time and frequency metrology by exploiting stable GNSS time scales. This paper proposes a low-cost method for precise measurement of oscillator frequency instability using a single-frequency software GNSS receiver. The only required hardware is a common radio frequency (RF) data collection device driven by the oscillator under test (OUT). The receiver solves the oscillator frequency error in high time resolution using the carrier Doppler observation and the broadcast ephemeris from one of the available satellites employing the onboard reference atomic frequency standard that is more stable than the OUT. Considering the non-stable and non-Gaussian properties of the frequency error measurement, an unbiased finite impulse response (FIR) filter is employed to obtain robust estimation and filter out measurement noise. The effects of different filter orders and convolution lengths are further discussed. The frequency error of an oven controlled oscillator (OCXO) is measured using live Beidou-2/Compass signals. The results are compared with the synchronous measurement using a specialized phase comparator with the standard coordinated universal time (UTC) signal from the master clock H226 in the national time service center (NTSC) of China as its reference. The Allan deviation (ADEV) estimates using the two methods have a 99.9% correlation coefficient and a 0.6% mean relative difference over 1–1000 s intervals. The experiment demonstrates the effectiveness and high precision of the software receiver method.     

中尺度预报模式不同方案实验研究

以大雾天气为例,利用WRF中尺度数值预报模式对各物理参数进行调整,从而验证各物理方案对大雾形成和发展的作用,并将其与控制性实验进行比较。对水汽通量散度、雾区范围分析,结果表明：这三个敏感性实验都不能很好地反映实况,因此原控制性实验更适合做定量定性研究。     

浮筒的强度设计和游艇的稳定性

计算了轻型游艇浮筒内的铅直方向和水平方向的应力,给出了相应的计算公式,可以根据该公式设计浮筒的厚度。分析了游艇的稳定性,计算了当载荷偏离游艇中心时游艇的倾斜角,可供工程设计人员参考。     

考虑管路的飞机液压刹车系统压力振荡分析

飞机液压刹车系统通常采用压力伺服阀控制刹车压力,由于布局限制,压力伺服阀和刹车作动器之间往往存在较长的液压管路.管路会给系统引入欠阻尼的频率特性,而且该特性会与压力伺服阀固有的局部压力闭环结构相耦合,使得压力伺服阀的输出压力容易出现振荡、失稳现象.因此通过在飞机液压刹车系统建模中考虑管路模型,在频域上分析了压力伺服阀与管路、容腔耦合的现象和原因,具体给出了管路参数和油液参数变化对压力闭环的影响,并通过时域仿真进一步验证了频域分析的结论.同时分析了匹配设计管路、增加系统阻尼和降低系统增益3种避免压力闭环控制振荡失稳的方法.为飞机液压刹车系统的设计与优化提供了理论参考依据.      

一种粒子群模糊支持向量机的航天器参量预测方法

针对航天器精确预测与健康管理的需求,将粒子群算法、模糊数学与支持向量机的优势相结合,提出了一种粒子群模糊支持向量机预测方法。针对某卫星南帆板输出电流参量的预测实例,设计了总平均绝对误差、总平均绝对百分比误差、总均方根误差三个预测结果评价指标,对不同步长情况下的预测结果进行了比较,证明了粒子群优化模糊支持向量机预测方法的有效性。通过对比粒子群优化模糊支持向量机模型、灰色粒子群神经网络优化模型、粒子群神经网络模型、灰色模型预测的总平均绝对百分比误差,结果证明粒子群优化模糊支持向量机的预测精度和效率较高,在航天器参量预测领域具有较好的应用前景。