基于导航定位原理的火箭涡轮泵轴承故障诊断

为准确判断火箭发动机涡轮泵轴承在试验台上试验时发生故障的部位，同时避免通过轴承特征频率诊断轴承故障的方法所带来的不确定性，基于GPS卫星导航定位原理，利用时幅曲线的相位信息，提出一种新的轴承故障诊断方法:振源坐标定位法，即通过四个已知坐标的振动传感器测得同一振动波的时幅曲线相位差判定振源位置。将试验台上轴承和四个振动信号传感器安放在坐标已知的直角坐标系中，利用时幅曲线拐点分析法准确捕获振动信号到达四个传感器的时刻，再利用这四个时刻和已知坐标计算出振源位置坐标，最后根据振源位置坐标判断其是否为轴承故障及具体故障部位。通过仿真计算证明该方法理论上可行。     

基于逆频响函数法的浅水域目标水下辐射声源级反演

为解决传统单水听器法或声阵波束形成法在测量浅水域目标水下声辐射的高误差问题，介绍了一种基于逆频响函数（IFRF）的浅水域水下声源级反演方法。基于虚源法构建了浅水域声场计算模型并详细描述反演的基本原理，对该方法的可行性和准确性进行了仿真分析，并在波导水池及湖上分别进行了验证试验。结果表明，在浅水域环境下采用逆频响函数算法反演目标水下辐射声源级是可行的，具有较高的反演精度。     

基于有限元的螺栓弯曲强度分析方法

应用MSC/NASTRAN有限元分析软件,对螺栓弯曲强度进行了分析,通过与工程计算结果的对比,证明有限元模型和有限元分析方法是准确可靠的。     

SIMULATION OF BLEED AIR BEHAVIOR DURING AIRCRAFT IN FLIGHT BASED ON FLOWMASTER

Bleed air system is one of the most important components of air management system(AMS).It acts as transfer pipes responsible for air supply at high temperature and pressure.The thermal and flow performance of the bleed air system is a key issue for the design of AMS since the characteristics of air source have a great influence on the anti-ice system,the environmental control system and other downstream system in need of high temperature pressurized air.Based on the one-dimensional lumped parameter technology,a computer analysis model of bleed air system is developed in order to analyze the thermal and flow behaviors of the nodal points in the pipeline network.The simulation are performed with a given flight assignment using the analysis model,and the results verify that the system meets the design requirements.     

Development and verification of an innovative photomultiplier calibration system with a 10-fold increase in photometer resolution

In this study, we construct a photomultiplier calibration system. This calibration system can help scientists measuring and establishing the characteristic curve of the photon count versus light intensity. The system uses an innovative 10-fold optical attenuator to enable an optical power meter to calibrate photomultiplier tubes which have the resolution being much greater than that of the optical power meter. A simulation is firstly conducted to validate the feasibility of the system, and then the system construction, including optical design, circuit design, and software algorithm, is realized. The simulation generally agrees with measurement data of the constructed system, which are further used to establish the characteristic curve of the photon count versus light intensity.     

能量和协方差检验的联合频谱感知算法研究

快速准确的频谱感知是认知无线电系统有效通信的前提。现有的能量检测算法易受噪声波动影响,为提高频谱感知的性能,采用了联合频谱感知算法。方法利用双门限的能量检测法进行粗检,并使用协方差检测算法对中间混淆区域进行二次判决。在噪声不确定的情况下,对联合频谱感知算法性能进行了仿真分析。仿真结果表明,在噪声波动较大时,算法有效地提高频谱检测的性能,而且计算复杂度得到降低,并优于能量检测法和协方差检测法。     

Variable stiffness design of redundantly actuated planar rotational parallel mechanisms

Redundantly actuated planar rotational parallel mechanisms (RAPRPMs) adapt to the requirements of robots under different working conditions by changing the antagonistic internal force to tune their stiffness. The geometrical parameters of the mechanism impact the performances of modulating stiffness. Analytical expressions relating stiffness and geometrical parameters of the mechanism were formulated to obtain the necessary conditions of variable stiffness. A novel method of variable stiffness design was presented to optimize the geometrical parameters of the mechanism. The stiffness variation with the internal force was maximized. The dynamic change of stiffness with the dynamic location of the mechanism was minimized, and the robustness of stiff-ness during the motion of the mechanism was ensured. This new approach to variable stiffness design can enable off-line planning of the internal force to avoid the difficulties of on-line control of the internal force.     

Fault-tolerant control with mixed aerodynamic surfaces and RCS jets for hypersonic reentry vehicles

This paper proposes a fault-tolerant strategy for hypersonic reentry vehicles with mixed aerodynamic surfaces and reaction control systems (RCS) under external disturbances and subject to actuator faults. Aerodynamic surfaces are treated as the primary actuator in normal situations, and they are driven by a continuous quadratic programming (QP) allocator to generate torque com-manded by a nonlinear adaptive feedback control law. When aerodynamic surfaces encounter faults, they may not be able to provide sufficient torque as commanded, and RCS jets are activated to augment the aerodynamic surfaces to compensate for insufficient torque. Partial loss of effective-ness and stuck faults are considered in this paper, and observers are designed to detect and identify the faults. Based on the fault identification results, an RCS control allocator using integer linear programming (ILP) techniques is designed to determine the optimal combination of activated RCS jets. By treating the RCS control allocator as a quantization element, closed-loop stability with both continuous and quantized inputs is analyzed. Simulation results verify the effectiveness of the proposed method.     

Guidance law implementation with performance recovery using an extended high-gain observer

Guidance law of a homing missile is implemented using an extended high gain observer without the model assumptions on target maneuvers. First, for a class of multi-input–multi-output nonlinear systems, extended high-gain observers are used for output feedback control with partial practical stabilization. Then the method is applied to the guidance law implementation of a homing missile with bearing only measurement. Simulation results show satisfactory performance.     

不锈钢、钛合金导管高频钎焊工艺方法的改进

高频钎焊焊接方法在国内外进行研究的院校和公司相对较少，是一项较新的钎焊方法。国外在此项焊接工艺的研究和应用走在世界的前列。国内一直处于不断摸索和改进的过程中，焊接过程始终存在一些问题。通过本课题技术研究和相关的试验，详细地介绍了高频钎焊设备、工艺方法和高频钎焊工艺参数确定等方面的应用。