一种共轴双旋翼式火星飞行器设计及其试验验证

针对火星飞行器探测需求,提出了一种共轴双旋翼式火星飞行器,基于计算流体力学方法优选了桨叶翼型、平面形状和扭转角等结构参数,基于叶素动量理论建立了旋翼气动力学模型,利用数值模拟方法选择了旋翼转速、旋翼间距和桨叶安装角等飞行参数,设计了原理样机"火星飞鸟-I"的结构与控制系统。构建了火星大气环境模拟器和重力补偿与运动约束装置,开展了模拟火星环境下旋翼式飞行器地面飞行试验,验证了共轴双旋翼式火星飞行器的推进性能,展望了旋翼式火星飞行器技术的发展方向。研究成果对我国开展的火星探测工程具有重要借鉴价值。     

弱引力下小行星动量驱动机器人的可控跳跃行为

以小行星表面着陆探测为背景,提出一种动量驱动机器人(MoRo)以满足弱引力复杂环境下的探测需求。该机器人利用弱引力环境下的摩擦和碰撞特性,通过主动辨识环境参数,规划和控制动量轮以产生期望的驱动力矩,完成可控性跳跃及腾空后的稳定拍照等任务。首先,基于MoRo的动量轮刹车机构特性,分析了MoRo在弱引力环境下的跳跃机理并对其跳跃方式进行了规划;接着考虑动量轮驱动机构三闭环伺服系统的非线性特性,基于Herze碰撞模型和Karnopp摩擦模型建立了MoRo在小行星表面的跳跃行为动力学模型;其次,使用机器学习算法建立环境参数和MoRo运动的函数关系,并基于环境参数规划动量轮转速实现跳跃距离和腾空高度的可控。最后,通过数值仿真校验了MoRo跳跃规划方法和控制方法的可行性。     

Multiple hierarchy risk assessment with hybrid model for safety enhancing of unmanned subscale BWB demonstrator flight test

To explore the low-speed characteristics of the Blended-Wing-Body (BWB) configuration for future civil aircraft, a series of unmanned subscale demonstrators have been developed and tested by our research team. During this process, specific safety risks deriving from uncertain design features, system unreliability, and insufficient personnel experience caused continuous flight test mishaps and the risk mechanism was not clear. Local and trial-and-error learning driven safety improvements took few effects on mishap prevention, so our focus was turned to look for systematic safety strategies. This paper establishes a systems theory based hybrid model to integrate the physical system reliability analysis techniques with the system dynamics method for illustrating the multiple risk interactions of the demonstrator flight test involving organizational, human resource and technical system factors. Using the prior BB-5 demonstrator as a case, the hybrid model simulation represents its historical risk evolution process, which verifies the model rationality. Derived risk control strategies reduced the mishap rate of a new demonstrator called BB-6 Sprit. The paper also shows the extended hybrid model can be applied on safety management of unmanned aerial vehicles from the initial period of vehicle development.     

不同边界层厚度下高马赫数进气道自起动过程研究

为了探寻入口边界层厚度变化对高马赫数进气道自起动性能的影响,对简化的二元高马赫数进气道的加速自起动过程进行数值仿真研究,分析了边界层厚度对自起动过程中流场波系结构变化和自起动性能的影响机制,获得了不同边界层厚度下的进气道自起动性能及主分离包高度的变化规律。结果表明:随着边界层相对厚度从0.05增加至0.3,进气道的自起动马赫数一开始保持不变,然后快速增大;相同主流条件下,不起动流场跨越主分离包无量纲压升和主分离包高度随边界层相对厚度的增大均变小;边界层动量损失厚度和跨越主分离包无量纲压升对进气道起动性能影响重大。     

硅橡胶基防热涂层动态烧蚀行为及机理研究

针对两种典型硅橡胶基防热涂层开展高温燃气流烧蚀实验，通过对烧蚀后涂层的宏观及微观形貌分析，探讨了其防隔热机理及烧蚀模型。研究结果表明：烧蚀后两种涂层均存在液态层、陶瓷层、热解层以及原始层；烧蚀过程中甲基苯基硅橡胶涂层主要发生主链“回咬”成环反应，导致树脂基体交联密度降低，力学性能下降，涂层外表面发生开裂，甲基乙烯基硅橡胶涂层则主要发生侧基交联反应，使树脂基体交联密度上升，促进涂层发生陶瓷化转变；热辐射、热容吸热、热解反应吸热以及热阻塞效应为四种主要的热耗散机制，质量损失产生的原因主要包括反应气体释放以及气动剪切力导致的机械剥蚀。     

基于序列趋势和集合距离的UAV态势相似性度量方法

在无人机（UAV）自主作战与智能决策的过程中，无人机获取的新态势与历史态势的相似性度量是态势评估与作战决策的重要环节，而现有的相似性度量方法主要处理离散时刻态势，采用的欧式距离等方法对数据敏感，不符合作战态势特性，且处理效率低下，针对该问题，提出基于序列趋势和集合距离的UAV态势相似性度量方法。该方法首先选取UAV作战态势要素并以时间序列形式表征数据；然后，使用经验模态分解方法提取历史态势与新态势的序列趋势以度量序列趋势的相似性；最后，对趋势相似的每条态势序列进行自组织映射聚类，得到若干聚类中心构成集合，利用最优子模式分配距离度量集合间的距离，提取集合距离较小的部分获得与新态势相似的历史经验态势。通过公用数据集的分类效果比对实验以及作战仿真态势的相似性度量实验，表明该方法能够有效度量两序列之间的相似性程度，度量效果好，分类实验中分类精度较传统方法最高提高18%，且方法简便，具有一定的实用价值。     

Comparison of convergence time and positioning accuracy among BDS,GPS and BDS/GPS precise point positioning with ambiguity resolution

Precise point positioning (PPP) usually takes about 30?min to obtain centimetre-level accuracy, which greatly limits its application. To address the drawbacks of convergence speed and positioning accuracy, we develop a PPP model with integrated GPS and BDS observations. Based on the method, stations with global coverage are selected to estimate the fractional cycle bias (FCB) of GPS and BDS. The short-term and long-term time series of wide-lane (WL) FCB, and the single day change of narrow-lane (NL) FCB are analysed. It is found that the range of GPS and BDS non-GEO (IGSO and MEO) WL FCB is stable at up to a 30-day-time frame. At times frame of up to 60?days, the stability is reduced a lot. Whether for short-term or long-term, the changes in the BDS GEO WL FCB are large. Moreover, BDS FCB sometimes undergoes a sudden jump. Besides, 17 and 10 stations were used respectively to investigate the convergence speed and positioning errors with six strategies: BDS ambiguity-float PPP (Bfloat), GPS ambiguity-float PPP (Gfloat), BDS/GPS ambiguity-float PPP (BGfloat), BDS ambiguity-fixed PPP (Bfix), GPS ambiguity-fixed (Gfix), and BDS/GPS ambiguity-fixed (BGfix). The average convergence speed of the ambiguity-fixed solution is greatly improved compared with the ambiguity-float solution. In terms of the average convergence time, the Bfloat is the longest and the BGfix is the shortest among these six strategies. Whether for ambiguity-float PPP or ambiguity-fixed PPP, the convergence reduction time in three directions for the combined system is the largest compared with the single BDS. The average RMS value of the Bfix in three directions (easting (E), northing (N), and up (U)) are 2.0?cm, 1.5?cm, and 5.9?cm respectively, while those of the Gfix are 0.8?cm, 0.5?cm, and 1.7?cm. Compared with single system, the BDS/GPS combined ambiguity-fixed system (BGfix) has the fastest convergence speed and the highest accuracy, with average RMS as 0.7?cm, 0.5?cm, and 1.9?cm for the E, N, U components, respectively.     

层合夹心梁层界面上的应力分析

本文用弹性力学接触理论对受静载作用的层合夹心梁进行应力分析，揭示了层合界面上应力的分布规律以及叠层弹性模量比对界面应力的影响。分析的结果与实验结果十分一致。     

空间等离子体与垂直无碰撞激波相互作用的数值实验

应用混合模拟方法数值研究了高Ａｌｆｖｅｎ－Ｍａｃｈ数垂直无碰撞激波与等离子体间的相互作用。结果表明，激波上游的磁场非常稳定，粒子分布近似为Ｍａｘｗｅｌｌ分布。激波下游磁场存在不规则的湍动，质子分布有一个高能尾，且有些质子被激波反射。跟踪少量高速质子的计算结果表明，在ｔ＝４０Ωｉ＾－１时约有４０％的质子被激波反射，而７％质子可被加速，最大速度值可达到２０ＶＡ激波区的电场分布对质子的减速或加速起了主要     

HKJ涂料的新进展及其应用

在原 HKJ-1、HKJ-2基础上使用了更优异的颜料,适宜的助剂,用恰当的比例,制成双组份的 HKJ-2涂料,同时开发出了新型的 HKJ-3涂料,并将其涂覆于 HKJ-2表面。文章还列表比较了国内、国外的同类涂料,证明 HKJ-2和 HKJ-3涂料处于领先水平。