一种基于主星的导航星座构造方法

提出了一种基于主星的导航星座构造方法,利用不等式约束下多变量函数最优化问题的求解方法实现了导航主星的选取和导航星座的构造。实验表明,采用该方法构造的导航星座数据库,既不会造成导航星的丢失,又显著地减少了需要存储的识别基元的数量,从而有效地降低了导航星座数据库的存储容量。     

利用月球引力场改变地球卫星轨道倾角原理

文章以休斯公司利用月球引力拯救“亚洲三号”通信卫 星的活动为背景,引入影响球的概念,对利用天体引力场改变航天器运行轨道倾角的原理进 行了探讨,并得到利用目标天体改变轨道倾角所应满足的两个条件：目标天体的运行轨道和 空间位置。利用一条假设的卫星轨道说明了月球引力场对其轨道倾角的影响。     

模糊评价法在分散实习成绩评定中的应用

分散实习中，当某些学生工地偏远，指导老师监管困难时，其成绩评定只能依赖实习成果成绩与答辩成绩，这是一个多因素综合评价问题，采用模糊评价法能避免评价过程中主观性因素对结果的影响，研究提出了分散实习模糊评价体系，给出了综合评判义性失效时的解决办法，讨论了模糊评价方法的可行性。     

SOI工艺抗辐照SRAM型FPGA设计与实现

为提升SRAM型FPGA电路块存储器和配置存储器抗单粒子翻转性能，本文提出一种脉冲屏蔽SRAM单元结构。该结构通过在标准的六管单元中加入延迟结构,增大单元对单粒子事件响应时间，实现对粒子入射产生的脉冲电流屏蔽作用。以64k SRAM作为验证电路进行单粒子翻转性能对比，电路的抗单粒子翻转阈值由采用标准六管单元的抗单粒子翻转阈值大于25 MeV·cm 2·mg -1 提升至大于45 MeV·cm 2·mg -1 ，加固单元面积较标准六管单元增大约21.3%。30万门级抗辐照FPGA电路通过脉冲屏蔽单元结合抗辐照SOI工艺实现，其抗辐照指标分别为：抗单粒子翻转阈值大于37.3 MeV·cm 2·mg -1 ，抗单粒子锁定阈值大于99.8 MeV·cm 2·mg -1 ，抗电离总剂量能力大于200 krad(Si)。     

基于修正面元法的机翼焦点位置变化研究

针对静气动弹性问题中机翼焦点位置求解精度与效率的矛盾,提出采用分段斜率修正面元法来计算气动力,该方法以刚体机翼在不同迎角下的CFD数据作为修正基础,对弹性变形后的机翼下洗采用分段修正,克服了传统面元法无法考虑非线性因素的缺点。通过M6机翼气动焦点位置的计算表明:相对于CFD方法,该方法保持了较高的准确度并且计算效率较高;相对于传统面元法,该方法能够准确地计算焦点位置和弹性机翼焦点位置变化量,适用于工程设计。     

Robust control for constant thrust rendezvous under thrust failure

A robust constant thrust rendezvous approach under thrust failure is proposed based on the relative motion dynamic model. Firstly, the design problem is cast into a convex optimization problem by introducing a Lyapunov function subject to linear matrix inequalities. Secondly, the robust controllers satisfying the requirements can be designed by solving this optimization problem.Then, a new algorithm of constant thrust fitting is proposed through the impulse compensation and the fuel consumption under the theoretical continuous thrust and the actual constant thrust is calculated and compared by using the method proposed in this paper. Finally, the proposed method having the advantage of saving fuel is proved and the actual constant thrust switch control laws are obtained through the isochronous interpolation method, meanwhile, an illustrative example is provided to show the effectiveness of the proposed control design method.     

Study of amplification coefficient in a water-cooling Gardon-type heat power measuring apparatus

A new water-cooling Gardon-type heat power measuring apparatus is designed to meet the need of heat power source management and distribution. The steady state measurement mathematic model of the apparatus is built up in theory and the system amplification coefficient is defined as the ratio of the heat power to the temperature difference of the device, with which the value of the measured source power can be calculated easily with the corresponding temperature difference. In order to obtain an optimal heat power measuring system, the coefficients that can influence the relationship between the amplification coefficient, the temperature difference, and the heat power are analyzed. On the basis of these analyses, a set of experimental device is constructed and a number of experiments are carried on. Compared with the input heat power sample data, the error of the experimental measuring results is less than ±2%, and the experimental measuring values are in good agreement with the calculated theoretical ones. The heat power measuring apparatus can be applied in heat flux or heat power measurement in other fields due to its simple structure and high accuracy.     

卫星解体碎片生成数值模拟

提出卫星解体碎片生成的数值模拟方法,对卫星模型解体实验问题进行了数值模拟研究。有限元重构方法是一种有限元与 SPH 方法的结合,能够模拟获得孤立碎片的特性数据。通过在 SPH 模拟结果中重构有限元单元,能够有效区分碎片云中的置信孤立碎片和非置信孤立碎片,结合图论方法能够获得每个孤立碎片的单元构成及其尺寸、速度矢量和质量等信息。进而通过数据统计能够获得碎片分布信息。解体碎片数值模拟数据与实验数据具有较好的一致性,表明了该方法的有效性。     

ISAR非平稳目标成像时间和转速联合估计方法

针对逆合成孔径雷达(ISAR)非平稳目标成像,提出基于两特显点相位联合估计成像时间和转速的方法,并得到了转速与相位斜率差(PSD)的解析表达式.首先,基于两个特显点距离单元估计目标转动相位,根据不同时间段转动相位线性度(PLD)选择成像时间.其次,在适合成像的时间段,将成像时间等分成两段,分别提取两段时间内转动相位的斜...