一种新型多模式高速存储器

随着图像采集精度的提高和立体成像的需求,图像数据速率和总量呈几何级数增长,促进了高码率大容量存储的需求。提出一种新的高速存储器方案,通过改变FLASH类型和存储数据处理方式提高数据存储速率,以适应采集图像高精度和高速率的要求。     

一种同轴腔温漂问题的仿真

文章在三维仿真软件HFSS和CST中建立谐振腔模型，给出建模的原理和注意点；详细研究了腔体各尺寸随温度变化对腔体本征频率的影响的正负性及影响大小，得出引起腔体频率变化的主要结构因素；重点分析了调谐螺钉纵向扰动及径向扰动对谐振频率的影响。结合LC谐振电路对结果进行分析，得出减小温漂的措施。并根据仿真结果，对腔体的各个部分合理使用不同材料，使腔体温漂得到补偿。     

地球同步卫星BSR硅太阳电池阵输出功率衰减规律分析

长期受粒子辐照、紫外辐照等因素的影响,地球同步卫星的太阳电池阵输出功率会出现较为明显的衰减。这里选取某地球同步卫星使用的背表面反射(BSR)硅太阳电池阵为研究对象,采用光强因子和温度因子修正太阳电池阵的输出功率,使用局部加权回归散点平滑法(LOWESS)分析了其在设计寿命期间的输出功率衰减规律;同时基于LOWESS建立了预测模型,用于硅太阳电池阵超寿运行期间的功率预测。实测数据表明:本文构建的预测模型可以满足超寿地球同步卫星在轨管理使用需求。     

Optimization of beamforming and path planning for UAV-assisted wireless relay networks

Recently, unmanned aerial vehicles （UAVs） acting as relay platforms have attracted considerable attention due to the advantages of extending coverage and improving connectivity for long-range communications. Specifically, in the scenario where the access point （AP） is mobile, a UAV needs to find an efficient path to guarantee the connectivity of the relay link. Motivated by this fact, this paper proposes an optimal design for beamforming （BF） and UAV path planning. First of all, we study a dual-hop amplify-and-forward （AF） wireless relay network, in which a UAV is used as relay between a mobile AP and a fixed base station （BS）. In the network, both of the AP and the BS are equipped with multiple antennas, whereas the UAV has a single antenna. Then, we obtain the output signal~to-noise ratio （SNR） of the dual-hop relay network. Based on the criterion of maximizing the output SNR, we develop an optimal design to obtain the solution of the optimal BF weight vector and the UAV heading angle. Next, we derive the closed-form outage probability （OP） expression to investigate the performance of the dual-hop relay network conveniently. Finally, computer simulations show that the proposed approach can obtain nearly optimal flying path and OP performance, indicating the effectiveness of the proposed algorithm. Furthermore, we find that increasing the antenna number at the BS or the maximal heading angle can significantly improve the performance of the considered relay network.     

一种宽带阵列通道均衡器设计

从基本FIR均衡器的原理出发,讨论了校正源的设置方法和均衡器系数的计算方法.为了适应宽带阵列中高速信号处理的要求,探讨了一种经典的FIR均衡器时域高速实现方法.该时域实现虽然结构简单,但在滤波器阶数较高时需要大量的乘法资源.为了降低均衡器对乘法资源的需求,借鉴快速卷积的实现方法,提出了一种基于快速傅里叶变换的高速率均衡器实现方法.与时域方法相比,该方法在滤波器阶数大于32时能明显降低对乘法资源的损耗.对实测数据的分析,验证了该方法的正确性.     

梯型螺纹量规在航天产品检测中的应用

介绍了梯形螺纹量规的的工艺性能,从外观、相互作用、螺距半角和中径的测量等方面分析了梯形螺纹量规检测技术,并对其应用规划加以阐述,以提升航天军工产品的工艺技术水平和使用可靠性。     

一种等离子体卡塞格仑抛物面隐身天线的设计

研究等离子体卡塞格仑抛物面隐身天线一体化设计的关键性问题。根据双反射面天线的经典理论设计公式得出卡塞格仑抛物面天线的设计参数,仿真计算传统卡塞格仑抛物面天线及等离子体卡塞格仑抛物面天线的辐射特性和散射特性。研究结果表明,等离子体卡塞格仑抛物面天线具有和传统金属反射体卡塞格仑抛物面天线一样的辐射性能,同时由于等离子体产生和消失的可控性,不工作时就只有介质外壳,具有极低的RCS,从而大大提高了反射面天线的隐身性能。     

导引头角跟踪回路性能分析

本文分析了在导引头系统工作过程中各种干扰对系统测量精度的影响以及导引头系统参数选择与抑制干扰影响的关系，给出了导引头系统参数选择的原则。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

X线乳腺图像中微钙化检测的快速排除无病变区域法

介绍一种通过去除数字化乳腺x线照片中的无病变区域（TNR）间接地获取感兴趣区域（ROI）的方法。该方法可通过3个步骤来实现：（1）将图像划分为若干个不重合的相等大小块，并为每块计算5个特征；（2）通过域值法进行粗分析，排除肯定不含有病变的块；（3）使用代价敏感的支持向量分类器作更精细的分析，以进一步排除肯定不含有病变的块。在真实的数字化X线乳腺照片上的实验表明：该方法可以有效地去除高达81．71％的无病变区域。