在火箭发动机燃烧室中气相湍流流动的理论计算

本文用单流体湍流模型对液体火箭发动机突扩燃烧室中冷态气相流动的速度场和湍流强度分布进行了数值计算并与实验数据进行了对比和分析.     

新型超高强度钢G50热变形与组织性能的关系

研究了新型无钴超高强度钢G50经不同锻造比墩粗锻造后材料的组织及性能的变化情况，并检验该新材料随锻造及热变形的能力。结果表明，该新材料具有非常好的可锻性及热成形性，且不同锻造比锻造并按标准制度热处理后的性能相差不大。     

产品开发机制初探

国营大中型企业缺乏内在活力,发展后劲不足,除了一些客观因素之外,企业产品开发过程中存在的问题是其重要原因之一。对此本文作了一定分析,并提出了建立企业产品开发机制的思路,旨在使企业不断地推出适销对路的新产品,以充分发挥国有大中型企业在国民经济发展中的主导地位。     

余度飞控计算机可靠性分析及其改进

综述了飞控计算机的工作任务、余度结构以及可靠性，结合新一代飞控计算机对高可靠性、实时性的要求，及目前飞控计算机余度构型进行了比较和可靠性分析，并提出了改进的三余度比较监控结构。     

The Plasma Environment of Comet 67P/Churyumov-Gerasimenko Throughout the Rosetta Main Mission

The plasma environment of comet 67P/Churyumov-Gerasimenko, the Rosetta mission target comet, is explored over a range of heliocentric distances throughout the mission: 3.25 AU (Rosetta instruments on), 2.7 AU (Lander down), 2.0 AU, and 1.3 AU (perihelion). Because of the large range of gas production rates, we have used both a fluid-based magnetohydrodynamic (MHD) model as well as a semi-kinetic hybrid particle model to study the plasma distribution. We describe the variation in plasma environs over the mission as well as the differences between the two modeling approaches under different conditions. In addition, we present results from a field aligned, two-stream transport electron model of the suprathermal electron flux when the comet is near perihelion.     

无任何附加假设的梁的自由振动

本文不采用平面假设来研究梁的弯曲自由振动，也不采用剪切型振动假设研究短粗梁的自由振动，而用弹性力学的位移法导出了梁的自由振动微分方程，并推导了简支梁的自振频率的统一公式，其特殊情况即为有附加假设的自振频率公式。     

Ku波段波导扫频双六端口网络分析仪

介绍研制的一种实用Ku波段扫频双六端口网络分析仪。该仪器能同时测量双口网络的4个散射参数及单口网络的复反射系数。     

柱面菲涅耳太阳聚光透镜的光学设计和光学效率

研究了柱面线聚焦菲涅耳太阳聚光透镜的光学设计和光学效率。依据理论分析，对透镜参数进行了优化设计，成功地研制出了柱面线聚焦菲涅耳聚光透镜。还分析了透镜相对孔径（F数）和成型模具等因素对透镜光学效率的影响。     

液氢贮箱停放过程中的力热分析

为了寻找到运载火箭长时间停放过程中液氢贮箱的最经济液位，用于制定合理的发射流程以及紧急处置方法，采用计算流体力学(CFD)技术，对某型运载火箭停放期间液氢贮箱的力、热情况进行了仿真计算和分析。计算选用了VOF(Volume-of-fluid)两相流模型以及Lee相变模型，为了提高Lee模型在不同压力情况下对相变过程的模拟精度，采用安托因方程修正了该模型。修正后的模型首先由试验数据校验了其精确性，随后开展的液氢贮箱停放过程仿真结果表明：贮箱的竖直方向与径向均存在温度分层的现象，液相内会形成大的漩涡，该漩涡会使得冷热流体不断进行热交换，并导致贮箱内部的液氢出现气化。贮箱停放期间蒸发率最大值超过2 m 3/h，发生在停放4 h左右；而贮箱液位充填至37 m 3以上或17 m 3以下时蒸发率较低，最小值接近1 m 3/h。     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.