一种航空装备使用最优梯次间隔时间计算方法

针对航空装备使用因梯次计划不合理,出现大修积压,影响装备在位率等问题,综合考虑装备在位率要求、大修厂修理能力、装备实际余寿等各项因素,提出了一种装备使用最优梯次间隔计算方法,并通过算例进行了仿真说明。结果表明,该方法可针对实际装备剩余寿命,给出最优梯次间隔时间参考建议,可为装备有效使用提供参考。     

Apparent rotation properties of space debris extracted from photometric measurements

Knowledge about the rotation properties of space debris objects is essential for the active debris removal missions, accurate re-entry predictions and to investigate the long-term effects of the space environment on the attitude motion change. Different orbital regions and object’s physical properties lead to different attitude states and their change over time.Since 2007 the Astronomical Institute of the University of Bern (AIUB) performs photometric measurements of space debris objects. To June 2016 almost 2000 light curves of more than 400 individual objects have been acquired and processed. These objects are situated in all orbital regions, from low Earth orbit (LEO), via global navigation systems orbits and high eccentricity orbit (HEO), to geosynchronous Earth orbit (GEO). All types of objects were observed including the non-functional spacecraft, rocket bodies, fragmentation debris and uncorrelated objects discovered during dedicated surveys. For data acquisition, we used the 1-meter Zimmerwald Laser and Astrometry Telescope (ZIMLAT) at the Swiss Optical Ground Station and Geodynamics Observatory Zimmerwald, Switzerland. We applied our own method of phase-diagram reconstruction to extract the apparent rotation period from the light curve. Presented is the AIUB’s light curve database and the obtained rotation properties of space debris as a function of object type and orbit.     

Spin motion determination of the Envisat satellite through laser ranging measurements from a single pass measured by a single station

The Satellite Laser Ranging (SLR) technology is used to accurately determine the position of space objects equipped with so-called retro-reflectors or retro-reflector arrays (RRA). This type of measurement allows to measure the range to the spacecraft with high precision, which leads to determination of very accurate orbits for these targets. Non-active spacecraft, which are not attitude controlled any longer, tend to start to spin or tumble under influence of the external and internal torques and forces.If the return signal is measured for a non-spherical non-active rotating object, the signal in the range residuals with respect to the reference orbit is more complex. For rotating objects the return signal shows an oscillating pattern or patterns caused by the RRA moving around the satellite’s centre of mass. This behaviour is projected onto the radial component measured by the SLR.In our work, we demonstrate how the SLR ranging technique from one sensor to a satellite equipped with a RRA can be used to precisely determine its spin motion during one passage. Multiple SLR measurements of one target over time allow to accurately monitor spin motion changes which can be further used for attitude predictions. We show our solutions of the spin motion determined for the non-active ESA satellite Envisat obtained from measurements acquired during years 2013–2015 by the Zimmerwald SLR station, Switzerland. All the necessary parameters are defined for our own so-called point-like model which describes the motion of a point in space around the satellite centre of mass.     

生成矩形毛坯最优两段排样方式的递归算法

提出一种递归算法生成矩形毛坯两维两段排样方式。这种算法将板材分成两段,同一段中所有条带的长度和方向都相同,二段的条带方向相互平行或垂直,不同尺寸的毛坯可以在一根条带中出现。通过递归在段上生成最优条带布局,隐式地讨论所有长度的段,确定所有两段组合的价值,选择价值最大的一个组合作为最优解。计算结果表明,该算法在计算时间和材料利用率两方面都有效。最后,一个实际问题的解表明:使用该算法,材料利用率较高。     

磁选态铯原子钟弱信号直接采样方法研究

磁选态铯原子钟的输出频率与铯束管输出的弱电流信号有关,影响其频率稳定度.为了提高其频率稳定度技术指标,在对磁选态铯原子钟主伺服电路弱信号压频转换(V-F)和模/数(A/D)直接采样对比的基础上,设计了基于DSP28335芯片的A/D直接采样电路,利用CAN总线通信技术与主控CPU板进行通信,实现整钟闭环锁定的方案.通过...     

卫星空间辐射效应及防护技术飞行试验初步设想

文章分析了国内外卫星空间辐射效应飞行试验的现状和发展趋势,根据我国卫星空间辐射效应及防护技术的具体情况,对卫星空间辐射效应及防护技术空间飞行试验的开展提出了建议。     

吸气式高超声速飞行器助推-巡航轨迹优化

针对吸气式高超声速巡航飞行器建立了纵向平面内的二维轨迹优化模型(包括火箭助推段和吸气式飞行段),其中大气模型、气动力模型和发动机模型均建立了比较详细的模型,能够比较全面、准确地描述吸气式高超声速巡航飞行器的特征;基于配点法建立了适用于高超声速巡航飞行器助推-巡航轨迹优化的方法,在求解非线性规划时引入了规范化处理、稀疏分析和偏导数计算方法等,以提高优化效率;对吸气式高超声速飞行器助推-巡航轨迹进行了优化研究,分析了典型设计参数变化对最优轨迹的影响。仿真结果表明:所建立的方法能够快速、高精度求解吸气式高超声速巡航飞行器轨迹优化问题,并且能够方便地分析设计参数变化对最优轨迹的影响,可用于吸气式高超声速飞行器飞行剖面设计与优化。     

考虑动态控制分配的空天飞行器再入姿态复合控制设计

针对空天飞行器再入大气层阶段的直接力/气动力复合控制分配问题,设计了一种基于改进指标函数的动态控制分配律,兼顾了反作用控制系统燃料消耗和闭环控制系统响应速度需求。此外,针对空天飞行器面对称大攻角再入引发的横侧向气动强耦合问题,在预测控制律中引入了通道间交叉耦合反馈项,对姿控过程进行增稳。对比仿真结果表明,动态分配算法在提高了再入姿态控制精度的同时降低了反作用控制系统的燃料消耗;交叉耦合反馈项的引入,缓解了倾侧角指令突变对偏航通道稳定性的干扰影响。     

一种基于灰色预测理论和抗差自适应Kalman滤波的滑坡监测算法

针对当前的山体滑坡监测技术监测精度低、实时性差、自动化程度低的问题，提出了一种基于灰色预测理论和抗差自适应Kalman滤波的滑坡监测技术。该技术使用抗差自适应Kalman滤波技术,对包括实时动态(RTK）载波相位差分定位数据、无人机摄影测量数据、土工带传感器数据在内的多源数据进行融合分析，将滑坡形变监测精度提高到了mm级。RTK技术和土工带传感器的使用克服了天气状况、植被覆盖对滑坡监测的影响。使用灰色预测理论对山体滑坡监测点进行形变预测，结合蠕变切线角判据，该技术实现了对山体滑坡预警等级的划分。仿真实验结果显示，该山体滑坡监测技术能够成功实现山体滑坡预测预警功能。     

有机硅凝胶离心脱泡工艺研究

为解决传感器类产品使用有机硅凝胶灌封时易产生气泡的问题，同时提高箭上传感器灌封效率和灌封质量，本文采用离心脱泡工艺对有机硅凝胶进行脱泡研究，采用双因素优选试验的设计方法来确定最佳离心脱泡参数范围及最优的离心脱泡工艺参数，并进行脱泡及固化效果检查。实验表明，当采用离心脱泡参数为740 r/min 、12 min时，脱泡效果最佳。固化后胶液切片内的气泡最小直径约24 μm，最大直径约54 μm，且无桥接情况，测其绝缘均大于200 MΩ，无导通或短路情况符合NASA标准及且两个相邻气泡之间不能形成导通短路的要求。通过批量生产与试验验证，采用离心脱泡的工艺方法效果理想、稳定、有效可行，易于批量生产，满足箭上传感器类产品的使用要求。