国外航天侦察相机和测绘相机发展概况

航天侦察和测绘是战略武装必不可少的组成部分,航天侦察和测绘相机是对地观测卫星的有效载荷。 该文将简要介绍国外航天侦察和测绘相机发展概况、水平和发展趋势。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

有源磁悬浮动态特性的测试与辨识

惯性仪表有源磁悬浮的动态特性实质上反映着其浮子组件五个自由度的动力学规律。针对时分式有源磁悬浮动态特性测试在工程实现上的具体困难， 基于多输入多输出（ Ｍ Ｉ Ｍ Ｏ） 系统的测试和辨识原理， 采用时分信号激励和近似的时序同步数据采集方法， 进行了磁悬浮各回路的时域测试和辨识， 结果表明， 开环状态下的浮子运动有一定交叉耦合关系， 在有源磁悬浮设计和调试中应当加以考虑。同时分析了辨识的可行性和可信度。     

局部模型跟踪控制理论的应用研究

将文献［１］中的局部模型跟踪变结构理论用于导弹控制系统设计，探索了一条设计控制系统的新路。某型号导弹控制系统设计中采用了本文提出的参数选择法，获得了良好的仿真结果。     

固体火箭发动机排气二次燃烧的抑制技术

介绍了无烟固体火箭推进剂研究的最新进展——固体火箭发动机排气二次燃烧的抑制技术,内容包括二次燃烧的产生机理、抑制机理和国外技术现状等.国外经验表明,采用少量的抑制剂可以达到对高能无烟推进剂发动机排气二次火焰的抑制.     

组网数据处理探讨

讨论了测向定位中双站交会定位及定位误差分析、三站交会定位、多站交会定位若干问题，首次尝试将最小二乘法和递推最小二乘法用于多站测向定位，减少了大量的矩阵求逆，数据利用效率高，可以提高测向定位的精度和简化运算。特别是在存在多径效应的情况下，有利于发现和去除野值。在测向站组网数据的处理和应用上有较强的实用性和推广价值。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

光纤嵌入法监测复合材料固化的研究

通过嵌入光纤对芳纶／五氧复合材料板及环氧树脂浇注体的固化进行初步研究，结果表明，光纤嵌入法能准确监测出浇注体及芳纶／环氧复合材料的瞬时固化情况。