The New Horizons Spacecraft

The New Horizons spacecraft was launched on 19 January 2006. The spacecraft was designed to provide a platform for seven instruments designated by the science team to collect and return data from Pluto in 2015. The design meets the requirements established by the National Aeronautics and Space Administration (NASA) Announcement of Opportunity AO-OSS-01. The design drew on heritage from previous missions developed at The Johns Hopkins University Applied Physics Laboratory (APL) and other missions such as Ulysses. The trajectory design imposed constraints on mass and structural strength to meet the high launch acceleration consistent with meeting the AO requirement of returning data prior to the year 2020. The spacecraft subsystems were designed to meet tight resource allocations (mass and power) yet provide the necessary control and data handling finesse to support data collection and return when the one-way light time during the Pluto fly-by is 4.5 hours. Missions to the outer regions of the solar system (where the solar irradiance is 1/1000 of the level near the Earth) require a radioisotope thermoelectric generator (RTG) to supply electrical power. One RTG was available for use by New Horizons. To accommodate this constraint, the spacecraft electronics were designed to operate on approximately 200 W. The travel time to Pluto put additional demands on system reliability. Only after a flight time of approximately 10 years would the desired data be collected and returned to Earth. This represents the longest flight duration prior to the return of primary science data for any mission by NASA. The spacecraft system architecture provides sufficient redundancy to meet this requirement with a probability of mission success of greater than 0.85. The spacecraft is now on its way to Pluto, with an arrival date of 14 July 2015. Initial in-flight tests have verified that the spacecraft will meet the design requirements.     

Astronaut photography and the intelligence community: Who saw what?

Despite NASA's astronaut photography benefiting a wide range of civilian interests, it occasionally conflicted directly with the critical national security requirement to protect the National Reconnaissance Program from public disclosure or compromise. The Intelligence Community consequently imposed a number of restrictions, from reviewing the photography before public release to limiting the capabilities of NASA's image-forming sensors. At the same time, beginning in the Mercury program the Intelligence Community acquired and analyzed some of the photography as a possible source of intelligence data that otherwise was not being collected.     

Interplanetary Coronal Mass Ejections Observed in the Heliosphere: 1. Review of Theory

With the recent advancements in interplanetary coronal mass ejection (ICME) imaging it is necessary to understand how heliospheric images may be interpreted, particularly at large elongation angles. Of crucial importance is how the current methods used for coronal mass ejection measurement in coronagraph images must be changed to account for the large elongations involved in the heliosphere. In this review of theory we build up a picture of ICME appearance and evolution at large elongations in terms of how it would appear to an observer near 1 AU from the Sun. We begin by revisiting the basics of Thomson scattering describing how ICMEs are detected, in this we attempt to clarify a number of common misconceptions. We then build up from a single electron to an integrated line of sight, consider the ICME as a collection of lines of sight and describe how a map of ICME appearance may be developed based on its appearance relative to each line of sight. Finally, we discuss how the topology of the ICME affects its observed geometry and kinematic properties, particularly at large elongations. This review is the first of a three-part series of papers, where a review of theory is presented here and a model is developed and used in subsequent papers.     

Development of a thin section device for space exploration: Overview and system performance estimates

In this paper we present a conceptual design of a spaceborne instrument for the in situ production of rock thin sections on planetary surfaces. The in situ Automated Rock Thin Section Instrument (IS-ARTS) conceptual design demonstrates that the in situ production of thin sections on a planetary body is a plausible new instrument capability for future planetary exploration. Thin section analysis would reduce much ambiguity in the geological history of a sampled site that is present with instruments currently flown. The technical challenge of producing a thin section device compatible with the spacecraft environment is formidable and has been thought too technically difficult to be practical. Terrestrial thin section preparation requires a skilled petrographist, several preparation instruments that individually exceed typical spacecraft mass and power limits, and consumable materials that are not easily compatible with spaceflight. In two companion papers we present research and development work used to constrain the capabilities of IS-ARTS in the technical space compatible with the spacecraft environment. For the design configuration shown we conclude that a device can be constructed that is capable of 50 sample preparations over a 2 year lifespan with mass, power, and volume constraints compatible with current landed Mars mission configurations. The technical requirements of IS-ARTS (mass, power and number of samples produced) depend strongly on the sample mechanical properties, sample processing rate, the sample size and number of samples to be produced.     

Interplanetary Coronal Mass Ejections Observed in the Heliosphere: 3. Physical Implications

We conclude the heliospheric image series with this third and final instalment, where we consider the physical implications of our reconstruction of interplanetary coronal mass ejections from heliospheric imagers. In Paper 1 a review of the theoretical framework for the appearance of ICMEs in the heliosphere was presented and in Paper 2 a model was developed that extracted the three-dimensional structure and kinematics of interplanetary coronal mass ejections directly from SMEI images. Here we extend the model to include STEREO Heliospheric Imager data and reproduce the three-dimensional structure and kinematic evolution of a single Earth-directed interplanetary coronal mass ejection that was observed in November 2007. These measurements were made with each spacecraft independently using leading edge measurements obtained from each instrument. We found that when data from the three instruments was treated as a single collective, we were able to reproduce an estimate of the ICME structure and trajectory. There were some disparities between the modelled ICME and the in situ data, and we interpret this as a combination of a slightly more than spherically curved ICME structure and a corotating interaction region brought about by the creation of a coronal hole from the CME eruption. This is the first time evidence for such a structure has been presented and we believe that it is likely that many ICMEs are of this nature.     

Development of a thin section device for space exploration: Rock cutting mechanism

We have developed a rock cutting mechanism for in situ planetary exploration based on abrasive diamond impregnated wire. Performance characteristics of the rock cutter, including cutting rate on several rock types, cutting surface lifetime, and cut rock surface finish are presented. The rock cutter was developed as part of a broader effort to develop an in situ automated rock thin section (IS-ARTS) instrument. The objective of IS-ARTS was to develop an instrument capable of producing petrographic rock thin sections on a planetary science spacecraft. The rock cutting mechanism may also be useful to other planetary science missions with in situ instruments in which sub-sampling and rock surface preparation are necessary.     

Minor objects in the solar system

The present status of theory and experiment relating to interplanetary bodies larger than molecules but smaller than asteroids is reviewed. The dynamics, nature, and origins of these objects are considered. The evidences from rocket and spacecraft measurements, meteor observations, terrestrial accretion and light-scattering phenomena are presented. The various lines of research are leading to a better understanding of these bodies, but there are many uncertainties to be resolved.This article was written independently but with approval of the National Aeronautics and Space Administration. The views or conclusions contained herein should not be interpreted as representing the official opinion of NASA.     

Preface

Journal of Reducing Space Mission Cost -     

Be stars in young clusters in the Magellanic Clouds

A substantial fraction (typically 10%) of Galactic B stars consists of Be stars. While Galactic Be stars have been fairly well investigated, very little is known about the Be star content of the Magellanic Clouds (MCs). We present a refined method of Be star identification by CCD photometry and apply it to four young clusters and associations in the MCs. We find NGC 330 in the SMC to be exceptionally rich in Be stars, while the fraction is clearly lower in the similarly aged LMC clusters NGC 2004 and NGC 1818. NGC 2044, a very young region in the LMC, contains almost no Be stars. Among very early-type B stars in the investigated MC clusters we find the largest number of Be stars, while in the Milky Way this is shifted to somewhat later types. In the LMC, there may be a second frequency peak around B6.Based on observations obtained at the 2.2m MPIA telescope at ESO, La Silla, Chile, partly on time granted by the MPIA, Heidelberg.