激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

应用联合变换相关器的成像制导系统

提出了一种光电混合的成像制导系统，它采用光学联合变换相关器作为其主要的图像识别单元，利用计算机对识别结果进行判决和显示，并发出跟踪信号给导引头，从而实现制导。联合变换相关器是对光学图像信号进行并行处理的器件，实时识别性能强，精度高。此成像制导系统克服了传统的红外制导系统易受外界因素影响，实时处理能力差，误判率较高的缺点，具有并行处理速度快、信息吞吐量大、体积小等优点，应用前景广阔。     

微波衰减测量过程失控的原因分析及解决方案

针对高频串联替代法微波衰减测量标准装置测量过程所出现的失控现象 ,从测量标准仪器、被测仪器、测量方法、人为因素等方面分析了失控的原因 ,制定并实施了相应的解决方案 ,使测量过程恢复到统计受控状态     

经纬仪水平测角误差的谱分析

分析了经纬仪水平测角时的误差组成，为了更精细地分离各误差成份提出了 谱分析法，并对引起测角误差的主要分量进行了误差修正。实际测量数据的分析表明，该方 法与传统的一次水平测角极限误差相比，可以获取更详细的误差，并可大大减小经纬仪使用时的测量不确定度。     

部分开放多极磁场中的日冕磁绳灾变

采用球坐标下二维三分量理想MHD模型，研究部分开放多极背景磁场中日冕磁绳的灾变现象．背景磁场由含3个闭合双极场的冕流和带赤道中性电流片的开放场构成，磁绳位于中心双极场的下方，其特性由环向磁通和轴向磁通表征．对给定的环向磁通，存在轴向磁通的一个临界值；对给定的轴向磁通，也存在环向磁通的一个临界值．在该临界值以下，磁绳附着于太阳表面，系统处于平衡状态；该临界值一旦被超越，磁绳将脱离太阳表面向上喷发，说明部分开放多极背景磁场中的日冕磁绳系统存在灾变现象．本文算例表明，灾变点对应的磁能阈值超过对应部分开放场(中心双极场开放，两侧的双极场仍维持闭合)能量约15％，其超过部分可为日冕物质抛射一类太阳爆发提供能源．     

NUMERICAL MODELLING OF VELOCITY AND TEMPERATURE DISTRIBUTIONS OF THE BUOYANCY CONVECTION EFFECT IN KNbO3 MELT

Numerical modelling of velocity and temperature fields in high-temperature KNbO3 melt of a loop-shaped Pt wire heater is carried out by using the commercial com putational code ANSYS for the mathematical solution of the governing equations.Based on the experimental boundary conditions and the Boussinesq approximation,the numerical modelling of a steady and two-dimensional model is applied to study the process under consideration of the buoyancy-driven convection condition. The result is compared with the previous experimental and theoretical data obtained in our laboratory, and the former is in agreement with the latter. Thus a theoretical guide for reasonable growth conditions is provided by studying in depth the real fluid flow effects in the crystal growth from the melt.     

Progress on Space Solar Telescope in 2004 - 2006

The progress on Chinese Space Solar Telescope (SST) in 2004-2006 is introduced. The scientific objectives are further clarified and the ground operation system has been planned. The 7 key technical problems of SST satellite platform and payloads have been tackled, which lay solid scientific and technological foundations for engineering prototype phase of the SST project. At present the SST project undergoes evaluation by CNSA and CAS so as to enter the engineering prototype phase of the SST project if it is finally approved.     

面天线检测数据处理方法的探讨

对面天线检测数据处理方法作了一些有益的探讨。从获取被测物的三维坐标后到获取真正有用的信息这一过程需要经过坐标转换和表面误差计算两个步骤 ,其中坐标转换是关键。在坐标转换方面 ,文中提出了曲面自由拟合、公共点转换和CAD面型转换三种方法 ,阐述了这些方法的数学模型 ,并且用实测数据进行了验证计算。理论分析和实际计算两方面显示 :CAD面型转换法既不需要天线的曲面方程 ,也不需要有已知的公共点 ,结果准确、可靠 ,是一种理想的方法 ;如果没有天线的CAD面型 ,但却存在公共点时 ,公共点转换法也是较理想的方法 ,其结果与给定的公共点误差有关 ;如果既没有天线的CAD面型又无公共点或公共点误差很大时 ,只能采用曲面自由拟合法 ,该法准确度最高 ,但容易使天线面型产生错位现象