关于薄膜反射镜成形机理的研究

聚酰亚胺薄膜反射镜是近几年发展起来的新概念。以Karman方程为基础讨论了薄膜反射镜的成型原理，分析了外载荷对薄膜反射镜面型的影响；给出了非线性耦合Karman方程的求解方法；以一种聚酰亚胺圆薄膜为例，用有限元法对Karman方程进行了数值求解，用zemike多项式拟合方法得到了圆薄膜在外载荷作用下的近似解析解，证明了把Karman方程解析解表示为多项式的合理性；用有限元法得到的不同外载荷作用下的薄膜的变形分析证明了通过控制外载荷的加载方式和载荷强度可以控制薄膜反射镜的面形，改善反射镜像差。     

一种综合性能与寿命数据的Bayes-Bootstrap方法

对现代长寿命、高可靠产品进行可靠性评估,传统大样本寿命试验和统计推断方法存在很大困难,包括伪寿命数据方法在内的性能与寿命数据综合的可靠性评估方法也存在很多问题。提出了将性能可靠性建模与Bayes方法相结合的方式解决这一困难问题,其中对性能试验数据建立性能退化模型,并利用Bootstrap方法处理伪寿命数据导致的随机性误差和构造融合Bayes验前分布,然后利用Bayes验后分析进行可靠性统计推断。对随机斜率模型和长寿命卫星动量轮轴承组件润滑寿命的应用表明,提出的方法可以充分利用产品研制、使用过程中各种类型的信息,特别是性能试验信息,具有一定的适用性。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

NUMERICAL MODELLING OF VELOCITY AND TEMPERATURE DISTRIBUTIONS OF THE BUOYANCY CONVECTION EFFECT IN KNbO3 MELT

Numerical modelling of velocity and temperature fields in high-temperature KNbO3 melt of a loop-shaped Pt wire heater is carried out by using the commercial com putational code ANSYS for the mathematical solution of the governing equations.Based on the experimental boundary conditions and the Boussinesq approximation,the numerical modelling of a steady and two-dimensional model is applied to study the process under consideration of the buoyancy-driven convection condition. The result is compared with the previous experimental and theoretical data obtained in our laboratory, and the former is in agreement with the latter. Thus a theoretical guide for reasonable growth conditions is provided by studying in depth the real fluid flow effects in the crystal growth from the melt.     

Progress on Space Solar Telescope in 2004 - 2006

The progress on Chinese Space Solar Telescope (SST) in 2004-2006 is introduced. The scientific objectives are further clarified and the ground operation system has been planned. The 7 key technical problems of SST satellite platform and payloads have been tackled, which lay solid scientific and technological foundations for engineering prototype phase of the SST project. At present the SST project undergoes evaluation by CNSA and CAS so as to enter the engineering prototype phase of the SST project if it is finally approved.     

对流层特大暴雨天气对电离层变化的影响

研究气象活动对电离层变化的影响．利用时序叠加方法，通过对1958-1998年期间发生在武汉的5次特大暴雨天气事件对武汉上空电离层变化的影响进行分析，发现：(1)特大暴雨能够引起低电离层，fbEs和，f0Es参量较明显地减小；(2)特大暴雨对电离层F区寻常波描迹的最低虚高h′F和电离层等效峰高hpF的参量也有一定影响，且随着雨量的增大这种影响作用也会增加；(3)特大暴雨对电离层其他参量影响甚弱或没有影响．本文认为，特大暴雨天气事件对电离层的影响主要来自于动力过程，特别是特大暴雨激发的或相伴的大气重力波、潮汐波和行星波等长周期大尺度过程的作用．     

面天线检测数据处理方法的探讨

对面天线检测数据处理方法作了一些有益的探讨。从获取被测物的三维坐标后到获取真正有用的信息这一过程需要经过坐标转换和表面误差计算两个步骤 ,其中坐标转换是关键。在坐标转换方面 ,文中提出了曲面自由拟合、公共点转换和CAD面型转换三种方法 ,阐述了这些方法的数学模型 ,并且用实测数据进行了验证计算。理论分析和实际计算两方面显示 :CAD面型转换法既不需要天线的曲面方程 ,也不需要有已知的公共点 ,结果准确、可靠 ,是一种理想的方法 ;如果没有天线的CAD面型 ,但却存在公共点时 ,公共点转换法也是较理想的方法 ,其结果与给定的公共点误差有关 ;如果既没有天线的CAD面型又无公共点或公共点误差很大时 ,只能采用曲面自由拟合法 ,该法准确度最高 ,但容易使天线面型产生错位现象     

一种新型的通用计数器的设计

介绍一种以大规模集成电路为核心组成的通用计数器的设计。该通用计数器具有输出标准信号、测量频率、测量周期、累加计数和自校等多种功能。