A bistatic SAR mission for earth observation based on a small satellite

The authors present a new scientific space mission consisting of a satellite carrying a receiving- only SAR which receives the signal transmitted by the ENVISAT-1 SAR. The integration of ENVISAT-1 SAR and bistatic radar data offers an improved potentiality of surface classification, three-dimensional observation, and the opportunity of advanced scientific experiments in the field of bistatic scattering. The small satellite nominal orbit and the attitude manoeuvres are designed in order to maintain an adequate overlap between the two radar swaths along the whole orbit, taking into account the ENVISAT-1 attitude and pointing. A preliminary satellite design (2-year lifetime) is then performed to evaluate the orbit decay and to determine the appropriate orbit manoeuvres (every 4 days) to control the satellites relative phase. The numerical simulation shows that a spacecraft of about 584kg is able to meet the mission requirements.     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

通用仪器接口总线标准及软件技术的发展

叙述了通用仪器接口总线标准和软件技术的现状和未来。介绍了ＧＰＩＢ、ＶＸＩ总线，程控仪器校准命令和虚拟仪器，给出了ＧＰＩＢ标准关系图，ＧＰＩＢ软件结构以及虚拟仪器框图。     

Carrier-wave interference to Loran-C: a statistical evaluation

Loran-C is a pulsed, hyperbolic radio aid for long-range marine, air, and land navigation. The worldwide expansion of Loran-C, especially in Europe, has focused attention on carrier-wave interference to the system. The effects of a multiplicity of carrier-wave interferers (CWIs) on receiver timing measurement accuracy are considered. Both the phase tracking and the cycle-selection performance of receivers are quantified in terms of the probabilities that they will operate correctly within the arbitrarily set error limits. Characteristic functions (CFs) are used to compute these probabilities. Analyses and results are presented for typical situations. The relative sensitivity of the phase tracking and cycle-selection functions to interfering signals are discussed     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

数字式射击瞄准计算机设计与实现

某型射击军械系统的射瞄计算机原采用模拟机电式技术实现,存在体积大、功耗大、可靠性及可维护性差等缺点,因此,使用数字式计算机技术对其进行升级改造势在必行.本文首先对原系统的火控原理及火控构型的进行了分析;其次,介绍了射击瞄准计算机的对外接口关系.重点介绍了数字式射击瞄准计算机的采样解算时间的确定、计算方法的选取及接口设计等内容.本文所设计的数字式射击瞄准计算机已通过了系统验证并得到了使用,克服了原有系统所存在的固有缺点.文中的设计思想与所用的工程方法对类似武器系统的升级改造有所借鉴.     

振动对空间光通信系统误码率影响的分析

在空间光通信系统中，由于卫星平台的振动，使得光发射机发生振动，从而对通信系统的误码率产生影响，本文针对光射光束为高斯光束时，振动对误码率的影响问题进行研究。结果表明，在振动时不仅振幅影响着误码率，而且波长也对误码率有影响，但通信距离对误码率的影响不大，一般可以忽略。     

对转桨推进型鱼雷有动力影响研究

为使国内具备鱼雷有动力风洞试验能力 ,通过设备研制和对转桨推进型鱼雷性能研究试验表明 :一是动力对姿态导数影响达 40 % ,效率导数一般下降 1 0 %～ 1 5 % ,设计单位应重视上述特性对鱼雷航行与机动特性的影响 ;二是对转桨对雷体稳定性作用值得高度重视 ,传统认为对转桨是鱼雷辅助稳定装置的设计思想应有所调整 ,尤其对机动性要求高的鱼雷。     

"空军航空修理物资管理信息系统"的设计与实现

本文首先分析了空军航空修理企业的管理特点，然后详细论述了空军航空修理物资管理信息系统的设计原则、网络方案、总体结构及软件设计方法。     

热惯性对热冲击半无限体热应力影响非傅立叶效应研究

考虑超快速加热引起传热过程的非傅立叶效应,基于线性热弹性理论和表面热惯性特性,建立了带惯性第一类边界条件的半无限体的动态温度场、热应力场方程组。用拉普拉斯变换法对方程组进行求解。结果表明,快速加热在半无限体内产生温度场和应力场,且热和应力呈波动输运机制。讨论了温升率或热惯性对半空间温度场和应力场的影响,比较弹性波波速与热波波速之比动态热应力的影响。