矢量水听器标准装置水声低频计量应用研究

对矢量水听器标准装置在水声低频计量中的应用进行了研究,简要介绍了水声低频计量中矢量、传统压电陶瓷两种类型水听器的测量原理,对矢量水听器标准装置和低频水声计量标准装置的适用对象、性能特点进行了分析和比较。通过现场实测数据,对矢量水听器标准装置用于传统压电陶瓷水听器低频校准的可行性进行了论证。论证结果表明,该矢量水听器标准装置除了可以用于矢量水听器的校准,也适用于传统压电陶瓷水听器的测试或校准,可以弥补低频水声计量标准装置受被测件最大尺寸局限的不足。     

一种垂直度测量方法及其国际比对

介绍了北京航天计量测试技术研究所参加亚太实验室认可合作组织(APLAC)垂直度测量比对的情况,利用垂直度标准装置对平行直角尺样件的外角和内角进行打表法比较测量,采用样件调转180°测量的误差分离技术,消减了标准装置的垂直度误差影响,并进行测量不确定度分析。比对结果证明所有的测量点获得E_n值小于1的满意结果。     

Walker星座摄动分析与保持控制策略

针对运行在中高轨道上的全球Walker星座的构形长期保持控制问题,通过分析星座卫星的轨道摄动及构形相对漂移,研究了星座构形长期保持的控制方法及控制策略.对于星座构形的保持,研究了星座构形摄动补偿法,提出了星座构形数值微分修正法.最后给出了全球星座构形长期保持控制策略并进行了仿真验证,仿真分析表明,星座构形数值微分修正法比构形摄动补偿法具有更高的控制计算精度.     

凝胶推进剂管道输送系统流阻特性实验和数值研究

为研究凝胶推进剂的流变特性,建立了两种不同结构的凝胶推进剂管道输送系统模型.在直管流变特性实验基础上,确定了凝胶推进剂的流变参数,采用凝胶推进剂和水对整个凝胶推进剂管道输送系统流动进行了数值模拟,并将结果与输送系统流阻实验的实验值进行了对比分析.结果显示数值计算结果与实验结果吻合较好.     

A Weighted Inner Product Estimator in the Geometric Algebra of Euclidean 3-Space for Source Localization Using an EM Vector-sensor

In this paper, the source localization by utilizing the measurements of a single electromagnetic (EM) vector-sensor is investigated in the framework of the geometric algebra of Euclidean 3-space. In order to describe the orthogonality among the electric and magnetic measurements, two multivectors of the geometric algebra of Euclidean 3-space (G3) are used to model the outputs of a spatially collocated EM vector-sensor. Two estimators for the wave propagation vector estimation are then formulated by the inner product between a vector and a bivector in the G3. Since the information used by the two estimators is different, a weighted inner product estimator is then proposed to fuse the two estimators together in the sense of the minimum mean square error (MMSE). Analytical results show that the statistical performances of the weighted inner product estimator are always better than its traditional cross product counterpart. The efficacy of the weighted inner product estimator and the correctness of the analytical predictions are demonstrated by simulation results.     

Design and Performance of an Improved Trapped Vortex Combustor

 A trapped vortex combustor (TVC) has been a very promising novel concept for it offers improvements in lean blow out, altitude relight, operating range, as well as a potential to decrease NO_x emissions compared to conventional combustors. The present paper discusses the improved designs of the new combustor over the prior ones of our research group, including that: a) the overall dimensions, both axial and radial, are reduced to those of an actual aero-engine combustor; b) the air flow distribution is optimized, and especially 15% of the air is fed into the liner as cooling air; c) a straight-wall diffuser with divergence angle 9癷s added. A series of experiments (cavity-fueled only, under atmospheric pressure) has been conducted to investigate the performance of the improved TVC. Experimental results show that at the inlet temperature of 523 K, the inlet pressure of 0.1 MPa, stable operation of the TVC test rig is observed for the Mach number 0.15-0.34, indicating good flame stability; the combustion efficiency obtained in this paper falls into the range of 60%-96%; as the total excess air ratio increases, the combustion efficiency decreases, while the increase of the inlet temperature is beneficial to high combustion efficiency; besides, the optimal Mach numbers for high combustion efficiency under different inlet conditions are confirmed. The outlet temperature profiles feature a bottom in the mid-height of the exit. This paper demonstrates the feasibility for the TVC to be applied to a realistic aero-engine preliminarily and provides reference for TVC design.     

基于涡格法的近程无人机气动优化与风洞实验验证

针对低雷诺数的近程无人机,利用涡格法（VLM）对无人机气动特性进行了加装翼尖小翼优化设计,并通过风洞实验进行了验证。首先给出了翼尖小翼的几何参数并分析其对全机气动特性的影响,其次利用涡格法对小翼进行气动建模和优选,针对无人机巡航状态给出了小翼优化结果,最后利用风洞实验对优化前后的无人机进行了吹风实验对比验证,实验结果表明,涡格法和风洞实验结果在线性段相符,涡格法能够较准确地描述和预测翼尖小翼特性,加装翼尖小翼后的无人机巡航状态升阻比提高12％,全机滚转阻尼加大,偏航阻尼变化很小。     

带执行机构的航空发动机喷口控制器设计方法

依据发动机非线性模型求取喷口的动态模型时,存在未建模动态对线性动态模型的建模误差,由此设计的喷口控制器较难达到设计要求,尤其在大范围飞行包线内喷口控制的动态性能将会变坏;同时由于传感器噪声问题、喷口执行机构的位置饱和限制、速率饱和限制的问题,以及PI控制中的积分饱和问题的存在,这些饱和限制等干扰将会影响PI控制器的设计性能。针对上述问题提出了一种带执行机构的喷口控制器的设计方法和抑制饱和限制干扰的喷口控制逻辑设计方法。首先获取了带执行机构的线性动态增广模型,然后针对该增广模型利用迭代线性不等式方法计算了喷口的鲁棒PI控制器,并对控制器输出进行抗饱和修正,从而提高了喷口控制器的鲁棒性。引入所述方法在发动机半物理仿真中进行了验证,在全飞行包线内获得了满意的喷口控制鲁棒性能。     

三相电压型PWM整流器的模糊PI控制方法

在双闭环控制的基础上,分析了整流器的模糊PI控制,建立了三相PWM整流器MATLAB/SIMULINK仿真模型。结果表明,该方法能够实现PWM整流器的高功率因数并且有良好的动态性能,从而验证了所提出方法的可行性和有效性。