浅谈EDA技术在数字系统设计中的应用

阐述了基于通用标准器件和在系统可编程器件的数字系统设计理念的不同之处。     

Autonomous navigation using the TDRSS Onboard Navigation System (TONS)

The National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC) is currently developing a Tracking and Data Relay Satellite (TDRS) System (TDRSS) Onboard Navigation System (TONS) to provide onboard knowledge of highly accurate navigation products autonomously to users of TDRSS. The TONS I operational system processes Doppler data derived from scheduled forward-link S-band services to provide onboard orbit and frequency determination and time maintenance. TONS I is implemented using a stable onboard frequency reference, a Doppler measurement capability in the user transponder, and onboard navigation/signal acquisition software. The success of the TONS experiment (1992/1993), which was implemented on the Explorer Platform/Extreme Ultraviolet Explorer (EP/EUVE) spacecraft, demonstrated the flight readiness of TONS I. TONS II-A provides the user with additional Doppler data derived from an S-band beacon signal, available approximately 80 percent of the time. This paper describes the TONS operational capabilities, configurations, and expected performance.     

测微目镜-TV测读系统在测量金属线胀系数中的应用

鉴于光杠杆法测量金属线膨胀系数的缺点,依据金属线膨胀系数测量原理,采用测微目镜-TV测读系统测量金属线膨胀系数,并做了可行性分析,在此基础上,设计出了一整套完整的测量金属线膨胀系数的方法,进行了大量的实验,取得了较多的实验数据,并进行了数据分析,最后认为运用测微目镜-TV测读系统测量金属线胀系数,提高了被测物体微小位移的可视度,大大降低了系统误差.     

The X-ray properties of normal galaxies

An extensive program to study nearby normal galaxies was carried out by various observers using the imaging instruments on the $\text{Einstein}$ Observatory; more than 50 such galaxies were detected with 0.5 – 3.0 keV luminosities ranging from 2 × 10³⁸ ergs s^?1 to 3 × 10⁴¹ergs s^?1. The X-ray luminosity of normal galaxies is ~2 × 10^?4 of the optical luminosity and shows no strong correlation with morphological type. For the nearest galaxies, (the Large and Small Magellanic Clouds, M31 and M33,) studies, performed with the Observatory, were comparable to the $\text{Uhuru}$ survey of the Galaxy. Approximately 30 new SNR were recognized in the Magellanic Clouds as a result. Over 90 sources were detected in M31 of which at least 20 are identified with globular cluster. The numbers of luminous (>10³⁷ ergs s^?1) sources detected in the nearest galaxies per unit mass are similar to that found in our own galaxy. Individual X-ray sources in the arms of nearby spirals can be very luminous; seven with luminosities in excess of 10³⁹ergs s^?1 have been discovered. The nuclei of some, but not all, normal galaxies are luminous X-ray sources; X-ray activity is not presently predictable from the radio or optical properties of the nucleus.     

LabVIEW 7 Express及其应用

本文通过对虚拟仪器及面向虚拟仪器的图形化编程语言LabVIEW的简单介绍,阐述了LabVIEW 7 Express作为最新版系统测试编程语言的特点及新特性,并以一个简单的例子说明其在编写面向虚拟仪器的应用程序方面的方法及优点.     

一种液体火箭发动机试验台螺纹拧紧力矩量化控制方法

针对液体火箭发动机试验台工艺装配可靠性提升的需求,提出一种螺纹拧紧力矩量化控制方法。利用非试验和试验环境的力矩值统计与分析,确定液体火箭发动机试验台螺纹拧紧力矩值区间;通过拧紧力矩强度理论计算,验证力矩值区间的合理性;结合试验台螺纹空间位置的具体特点,确定适用不同空间位置的力矩量化控制方法和流程,并在试验中进行了应用。应用结果表明,本文提出的方法可有效提高发动机试验工艺的可靠性。     

月球立方星姿态控制系统的初步设计与测试

立方星是一种模块化的微小卫星,在科学探测与专业人才培养等方面具有重要意义。针对目前立方星任务逐渐从近地轨道向深空扩展的发展趋势,以立方星月球深空任务为背景,利用商业器件设计并实现了初步的立方星姿态控制系统,以及姿态控制系统所必需的结构、电源、计算机等立方星子系统,同时给出了姿态测试平台的设计方案及其硬件实现。在所搭建硬件平台上,通过测量飞轮控制器的阻尼系数,对控制模型进行参数辨识与标定,获得了与数值仿真一致的实物测试结果。针对姿态控制系统设计了PD控制律,并在控制实验中实现了至任意姿态角的机动控制。     

多等级区域侦察弹性星座设计方法

针对传统侦察星座目标单一、弹性低的问题，提出了多等级区域侦察弹性星座的设计方法。该方法将星座设计过程按区域等级信息分为多个子星座逐步设计，直到整体星座对所有的区域性能满足设计要求。以区域被划分为3个等级为例，首先对星座设计需求、设计指标及设计步骤进行了分析。其次推导了地面最低分辨率和轨道高度的关系并确定了不同子星座的轨道高度。最后考虑轨道倾角、一箭多星发射、光照和升交点漂移同步约束，构建基础星座、子星座1和子星座2的优化模型。最终设计星座为3层混合星座，共8个轨道面和70颗卫星，星座对各等级区域的最大重访时间分别为10937s，12241s和17437s，弹性指数为2213%，2420%和6361%。结果表明该方法设计的星座可实现对区域覆盖和弹性分级的设计要求，证明了方法的有效性。对比Walker星座设计方法，在同等设计要求下，Walker星座所需卫星数为156颗，多等级区域侦察弹性星座所需卫星数远低于Walker星座，结果进一步证明了该星座设计方法的优越性。