知识管理——知识经济背景下的管理新模式

在知识经济背景下，知识成为了企业竞争优势的来源。本文主要论述了知识管理的概念、功能、目标；企业如何实施知识管理；实施知识管理容易陷入的误区；制约我国企业实施知识管理的主要因素以及相应的对策。     

P2P随机图的一种遍历改进算法

论文通过对随机有向图(n,k)广度优先遍历算法的改进,提出了一种改进型的拓扑遍历算法,从而加快P2P网络中拓扑生成的速度。同时验证了在拓扑生成中如何通过选择根跳距最大限度地加快遍历的速度,使拓扑图的时间较短,避免造成生成拓扑的图的强连通性。     

基于FPGA的数据接口电路设计

鉴于FPGA设计数字电路的多种优势,针对星上相机输出数据格式和地面采集系统接收数据格式不一致性,改变传统的设计方式,进行了基于FPGA的数据接口电路设计。文章描述了电路设计的基本原理、实现方案、时序仿真,并对电路设计中遇到的关键问题的解决进行了阐述。其中实现方案包括FPGA外围电路硬件设计和FPGA芯片内软件时序设计。     

基于TDRSS的低轨卫星定轨方法研究

利用跟踪与数据中继卫星系统(TDRSS)组成天基测控系统对低轨卫星进行轨道确定,并讨论了低轨卫星在TDRSS系统覆盖区域的时间段,以改进的Gauss-Newton算法为基础,设计了非线性迭代的微分轨道改进算法,有效抑制了算法截断误差.仿真实验证明基于TDRSS的测控技术可显著提高测控覆盖率,减少地面测控站压力,有效确定低轨卫星轨道,定轨位置误差小于20 m,速度误差小于0.01 m/s,能满足一般低轨卫星的定轨精度要求.     

分布式数据库中的查询优化

分布式数据库系统由于数据的分布和冗余使得分布式查询处理增加了许多新的内容和复杂性,对于一个给定的查询,通常会有多种可能的策略,查询优化就是从这许多策略中找出最有效查询计划的一种处理过程。论文简要介绍分布式数据库系统查询优化的目标、策略,并针对分布式数据库系统的查询优化的典型方法,进行了分析、总结。     

The effect of small vibrations on Marangoni convection and the free surface of a liquid bridge

The effects of small vibrations on Marangoni convection were investigated experimentally using a liquid bridge of 5 cSt silicone oil with a disk diameter of 7.0 mm, and an aspect ratio close to 0.5. Experiments were performed to determine the critical temperature difference data for no vibration case and with small vibrations applied. The experimental results have shown that the effect of small vibrations on the onset of oscillatory flow is small since the critical temperature difference data for different aspect ratios were not affected by the vibrations. To clarify the surface oscillation phenomena induced by external vibrations, a 3-D numerical simulation model was also developed using a level set algorithm to predict the surface oscillations of isothermal silicone oil bridges. By subjecting the liquid bridge to small vibrations, the surface oscillation characteristics were predicted numerically, and the numerical results compared well with the predictions of an analytical model proposed previously. Furthermore, the effect of small vibrations on the surface vibration amplitude of the liquid bridge is also discussed.     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

高强钛合金中的微动损伤与疲劳

本文对高强钛合金Ti-10V-2Fe-3Al在不同温度下的微动损伤和疲劳特性进行了研究。试验结果表明,该合金对微动损伤十分敏感,常温疲劳强度下降达50％。微动损伤的主要机制是疲劳脱层,这是由作用在材料次表层的交变切应力引起的,它将导致疲劳裂纹的萌生和早期断裂。疲劳裂纹的扩展方向可根据接触应力分析得到解释。在较高试验温度下,由于接触面形成的氧化层的保护作用,微动损伤程度减弱。