导弹发射车主机发电时带外供电的方法

对某型导弹发射车主机发电的供电体制进行了简要分析 ,提出了增加外供电体制的措施和方法。外供电方案的实施 ,不仅为部队的平时训练提供了方便 ,而且为提高导弹发射车的可靠性和生存力提供了必要条件 ,增强了整个武器系统的战斗力。     

机动再入飞行器自适应飞行控制系统设计

研究机动再入飞行器的制导控制问题。为了解决机动再入飞行器气动系数变化范围大、气动耦合严重和气动参数非线性过零常值大等恶劣条件下的控制，并且能充分利用飞行器可测量信息提高系统自适应能力，本文提出了状态方程参数辨识－－极点配置－－前馈补偿自适应控制的飞行控制系统的设计方法。通过对新型号再入飞行器的制导系统仿真，可以看出该控制系统使其有很好的飞行性能。     

深度节流补燃循环发动机系统稳定性研究

补燃循环发动机深度节流过程中,系统参数大范围变化,低工况时喷注器压降和供应系统节流元件压降较低,容易出现推进剂供应系统与热力组件耦合的不稳定问题。针对10∶1深度节流富氧补燃循环发动机,通过Nyquist稳定性分析方法,对发动机全工况范围内泵后供应系统和燃气系统耦合稳定性进行仿真研究。结果表明:富氧补燃循环发动机燃料供应路与燃气路形成的闭环系统在低工况时,稳定裕度较低,改善燃气发生器喷雾燃烧效果以缩短时滞、增加燃气停留时间、在靠近燃气发生器位置增加供应系统压降能提高系统稳定裕度。     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

组网数据处理探讨

讨论了测向定位中双站交会定位及定位误差分析、三站交会定位、多站交会定位若干问题，首次尝试将最小二乘法和递推最小二乘法用于多站测向定位，减少了大量的矩阵求逆，数据利用效率高，可以提高测向定位的精度和简化运算。特别是在存在多径效应的情况下，有利于发现和去除野值。在测向站组网数据的处理和应用上有较强的实用性和推广价值。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

基于XML的产品主模型技术研究

多学科设计优化方法是近年来发展的一种设计复杂系统的新方法。它充分考虑各个学科之间的相互影响和耦合作用,以获得系统的整体最优解。产品主模型技术是多学科设计优化的关键技术之一,能较好地解决应用模型之间的数据交换和通信。文章介绍了产品主模型的概念及其特点,对产品主模型技术及其实施过程进行了深入研究。回顾了可扩展标记语言的产生和发展历史,并对其特性进行了较详细介绍;研究了基于可扩展标记语言技术实现系统集成的技术路线;最后,提出了基于可扩展标记语言技术和产品主模型技术的卫星总体方案多学科设计优化集成框架。     

Ada语言在星载软件上的应用

介绍了星载软件的特点和构成，从提高星载软件可靠性的角度引入了高级程序设计语言－Ada语言与汇编语言的接口调用技术，以及使用Ada 语言开发星载软件和应用技术。