PARAMETER ANALYSIS ON CIRCULATION CONTROLLED CIRCULAR CYLINDER FOR NOTARTM TAIL BOOM

Lift on circulation control （CC） circular cylinder is calculated via numerical simulations based on 2D real- izable k-e epsilon viscous model and compared with experimental data. The simulation result shows an acceptable agreement with tested data. With the proved grid and simulation method, series of simulations are conducted to study the effect of parameters on lift. Single slotted tail booms under different clown wash velocities are optimized with the principle of generating maximum total moment around the main rotor shaft with same total power con- sumption. The results show that larger jet flow velocity, or smaller blow angle, or larger diameter of the cross section can help generating larger lift while enhancing the attachment of both the jet flow and down wash flow. Multiple slotted tail boom is better because it increases lift with same total slot width, and can increase lift by in- creasing total slot width without causing separation, also it helps generating high steady lift at a big rank of slot at- tack angles. To mount a guide vane （GV） at the exit of the slot, or shape the upper slot wall like a smooth-GV, or design the slot with an edge fillet is not recommended because it reduces the velocity of both the jet flow and the upstream of the attached downwash flow. Compared with other shapes of the slots, arcs-profiled slot performs better because of larger jet flow velocity and smaller blow angle. In order to generate the largest moment with same total power consumed by the entire NOTARTM system, total width of the slots and slot attack angle should be optimized according to velocity of down wash flow.     

Eye light flashes on the Mir space station

The phenomenon of light flashes (LF) in eyes for people in space has been investigated onboard Mir. Data on particles hitting the eye have been collected with the SilEye detectors, and correlated with human observations. It is found that a nucleus in the radiation environment of Mir has roughly a 1% probability to cause an LF, whereas the proton probability is almost three orders of magnitude less. As a function of LET, the LF probability increases above 10 keV/micrometer, reaching about 5% at around 50 keV/micrometer.     

MIRAS in orbit demonstration mission based on spanish MINISAT platform

MIRAS is the Microwave Imaging Radiometer with Aperture Synthesis developed under ESA contract, in order to image the ground soil moisture and the ocean salinity from low Earth orbit.

High potential exists for application of this technology in space at low frequency, but low frequency means high antenna dimmensions with potential difficulties in terms of radiating elements correlation and measurements stability.

Based on the foreseen difficulties, ESA envisages a reduced size intermediate instrument compatible with small satellites which is named MIRAS demonstrator.

This paper presents the implementation of the MIRAS antenna demostrator on a Spanish MINISAT platform.

MINISAT programme of small satellites is part of the Spanish National Space plan. The first element of the serie (MINISAT 01) will be launched in December-96.     

A study on thin walled intersecting spheres

Intersecting spheres are useful in the design of pressure vessels for weight limited situations as in the case of space or ocean applications. This paper treats the general problem of N intersecting spheres demonstrating that mass reduction can be achieved in relation to the single sphere that encloses the same internal volume. It is shown that this reduction approaches asymptotically the value of 39.5%.     

Optimization of imperfect stiffened cylinders under destabilizing loads

A design procedure is outlined for optimizing stiffened, thin circular, cylindrical shells subject to a given set of destabilizing loads, in the presence of a specified initial geometric imperfection. The procedure incorporates two distinct steps (a) optimization based on linear buckling analyses and (b) imperfection sensitivity studies of the optimum design point from (a) as well as of the surrounding design space. A comparison of all these designs yield the true optimum in the presence of the specified geometric imperfection. The present methodology is fully demonstrated through two illustrative examples, one dealing with an axially loaded stiffened cylinder and one with a torsionally loaded one.     

Two-frequency radio occultation measurements with Venera-9 and Venera-10 orbiters

The experiment with two-frequency radio occultation measurements of the Venusian nightside ionosphere using the Venera-9 and 10 orbiters is described. The experiment is the first of a kind in which the radio link to one of the spacecraft is used to probe the ionosphere, while the other is measuring the variations in the integral electron number density along the path of radio ray propagation. The experiment has been designed to achieve the maximum possible accuracies in determining the parameters of the probed ionosphere using the bistatic two-frequency radio occultation method.     

Intrinsic time scale for reconnection on the dayside magnetopause

Recently much attention has been focused on the transient behavior of the magnetopause in response to pressure pulses and southward fluctuations of the interplanetary magnetic field. We examine the motion of the magnetopause behind the foreshock and conclude that this motion is affected by foreshock pressure variations but not by fluctuations in the direction of the magnetic field. Neither magnetopause erosion nor flux transfer event occurrence is controlled by the foreshock. On the contrary, flux transfer events occur at times of steady IMF and thier quasi-periodic behavior is controlled by the magnetopause or the magnetosphere and is not driven by the external boundary conditions. Since flux transfer events are clearly due to reconnection, this observation implies that the IMF must be southward some time perhaps as long as 7 minutes before flux transfer begins.     

Dayside reconnection during IMF northward: A possible foreshock effect

The northward and southward orientation of the interplanetary magnetic field (IMF) is usually considered as providing the external boundary conditions in the solar wind interaction with the Earth's magnetopause but it is the magnetic field in the magnetosheath that interacts with the Earth's magnetic field. In this paper, we consider the possibility that the wave activity in the foreshock region may affect the magnetic field orientation in the magnetosheath with time scales that might be geomagnetically effective. If magnetosheath magnetic field becomes disturbed on plasma streamlines which are connected to the quasi-parallel bow shock and foreshock, the magnetic field orientation on the inner magnetosheath may differ significantly from the undisturbed IMF. We present a model of dayside reconnection which may occur when the IMF northward and illustrate its effects on the erosion of the magnetopause.     

Theory of magnetic reconnection in three dimensions

Magnetic reconnection in traditional, two-dimensional theory can be closely associated with topological properties of the magnetic field, separatrices, neutral lines, or separators. Such well-defined topological properties may no longer exist, or become hopelessly complicated, in more general three-dimensional configurations, that otherwise behave physically quite similarly to the two-dimensional configurations. We discuss generalized definitions of reconnection applied to such situations and illustrate typical properties with simulations of three-dimensional reconnection in the magnetotail.