干涉测量宽带相关处理算法与验证

阐述了一种用于航天器精确角位置测量的干涉测量宽带相关信号处理算法,通过仿真验证了算法的有效性,并搭建卫星干涉测量实验系统,采集某地球同步卫星信号进行宽带相关信号处理,获得清晰干涉条纹,准确估计出反映测站与卫星位置关系的时延观测量。结果表明宽带相关信号处理的估计时延与卫星信号链路标定时延、测距时延组成系统时延闭合回路,初步验证了干涉测量实验系统的有效性,为后续飞行任务中航天器高精度干涉测量积累了技术和经验。     

T型尾翼颤振模型光学测量实验与弯扭特性解算

在FL-26跨声速风洞半模试验段进行了某高速飞机T型尾翼颤振模型的光学测量实验,并依据测量结果解算了尾翼颤振模型的弯扭特性。颤振模型表面用白色圆点进行标记,用于记录模型表面的位移变化,两台固定在风洞试验段上壁板观察孔旁肋板上的400万像素工业相机用来采集图像,采集到的图像通过自主开发的图像解算软件进行图像的识别与求解,计算出尾翼颤振模型表面标记点的三维坐标。模型表面标记点的三维坐标通过坐标变化转换到风洞气流坐标系中,利用不同时刻模型表面坐标的变化计算模型剖面扭角和弹性轴位移的分布。T型尾翼右平尾图像采集实验与弯扭特性计算结果表明,非接触光学测量技术可以用于高速颤振试验的定量分析中。     

支线发动机维修

未来十年,支线发动机维修企业将面对新机型投入运营和老旧飞机淘汰等诸多状况。在此期间,将有三种新支线喷气投入商业运营:以SaM146为动力的苏霍伊超级喷气机SSJ100;以普惠公司的PW1000GTF发动机为动力的三     

粉末耐热钛合金组织性能及成形技术

采用热等静压技术及旋转电极粉,采用预合金粉粉末冶金工艺开展了粉末耐热钛合金TC11(Ti-6.5AJ-3.5Mo-1.5Zr-0.3Si)制备技术研究,研制出了全致密粉末TC11合金,通过热处理工艺研究优化粉末TC11材料的组织和性能.利用光学显微镜,对其组织进行了分析,用SEM观察了旋转电极粉末形貌,对室温及高温(550℃)拉伸性能及弹性模量等进行了测试分析.粉末TC11合金的组织和性能与同批次TC11锻棒材料进行了对比研究.利用特殊模具成形,开展了粉末TC11构件近净成形技术的研究,实现了整体大尺寸、带网格加强筋的薄壁粉末TC11合金航天飞行器舱体件近净成形,且未检测出内部缺陷.研究结果表明,粉末TC11合金具有与锻造材料相当的拉伸性能,而弹性模量更优,其金相组织均匀细致,形成了网篮组织,并有围绕其分布的等轴α.粉末TC11合金及合适的近净成形技术可在高性价比、高可靠性的轻质耐热航天飞行器构件制备中得到应用.     

多孔质节流空气静压轴承静态性能实验研究

本文采用不锈钢多孔质材料研制了一种新的空气静压轴承,并对不同平均孔径的多孔质空气静压轴承以及一种表面复合节流空气静压轴承的承载能力和刚度进行了实验测试和分析,结果表明,选用合适的不锈钢多孔质材料以及适当的加工方法可以制造高承载能力与高刚度的空气静压轴承。     

Optimization of a tool kit for machining by methods of graph theory

Some methods of optimizing a cutting tool kit by the minimum labour content criterion in milling of an article are considered. Their advantages and disadvantages are given.     

电沉积制备ZrO2／Ni纳米复合材料的超塑性

采用电沉积方法制备了平均晶粒尺寸为45 nm的ZrO2/Ni纳米复合材料,并通过拉伸试验对该材料的超塑性能进行了研究.结果表明:ZrO2/Ni纳米复合材料具有低温高应变速率超塑性,在温度为450℃、应变速率为1.67×10-3/s时,获得的最大伸长率为605%.采用SEM和TEM分析了沉积态材料及变形后的组织,并对变形机理进行了探讨.ZrO2/Ni纳米复合材料的超塑变形机制主要是晶界滑移,S元素的析出在一定程度上协调了变形.     

Doppler Compensation & Single Pulse Imaging using Adaptive Pulse Compression

The effects of target Doppler are addressed in relation to adaptive receive processing for radar pulse compression. To correct for Doppler-induced filter mismatch over a single pulse, the Doppler-compensated adaptive pulse compression (DC-APC) algorithm is presented whereby the respective Doppler shifts for large target returns are jointly estimated with the illuminated range profile and subsequently incorporated into the original APC adaptive receive filter formulation. As a result, the Doppler-mismatch-induced range sidelobes can be suppressed thereby regaining a significant portion of the sensitivity improvement that is possible when applying adaptive pulse compression (APC) without the existence of significant Doppler mismatch. In contrast, instead of compensating for Doppler mismatch, the single pulse imaging (SPI) algorithm generalizes the APC formulation for a bank of Doppler-shifted matched filters thereby producing a sidelobe-suppressed range-Doppler image from the return signal of a single radar pulse which is applicable for targets with substantial variation in Doppler. Both techniques are based on the recently proposed APC algorithm and its generalization, the multistatic adaptive pulse compression (MAPC) algorithm, which have been shown to be effective for the suppression of pulse compression range sidelobes thus dramatically increasing the sensitivity of pulse compression radar.     

Data Association and Track Management for the Gaussian Mixture Probability Hypothesis Density Filter

The Gaussian mixture probability hypothesis density (GM-PHD) recursion is a closed-form solution to the probability hypothesis density (PHD) recursion, which was proposed for jointly estimating the time-varying number of targets and their states from a sequence of noisy measurement sets in the presence of data association uncertainty, clutter, and miss-detection. However the GM-PHD filter does not provide identities of individual target state estimates, that are needed to construct tracks of individual targets. In this paper, we propose a new multi-target tracker based on the GM-PHD filter, which gives the association amongst state estimates of targets over time and provides track labels. Various issues regarding initiating, propagating and terminating tracks are discussed. Furthermore, we also propose a technique for resolving identities of targets in close proximity, which the PHD filter is unable to do on its own.     

纳米复合镍粉雷达吸波涂层研究

采用机械化学法将纳米SiC包覆在镍粉表面制备复合吸波材料,将该材料喷涂在基体上制备吸波涂层,并研究了SiC在复合材料中的含量变化对涂层吸波性能的影响.研究表明,SiC含量为10%时,纳米复合涂层的吸波性能最佳.与镍粉吸波涂层相比,该纳米复合涂层中频段的吸波性能明显提高,发射率小于-5 dB的带宽由7 GHz增加到10.4 GHz,涂层最高吸收值达到-23.4 dB.