New Horizons: Anticipated Scientific Investigations at the Pluto System

The New Horizons spacecraft will achieve a wide range of measurement objectives at the Pluto system, including color and panchromatic maps, 1.25–2.50 micron spectral images for studying surface compositions, and measurements of Pluto’s atmosphere (temperatures, composition, hazes, and the escape rate). Additional measurement objectives include topography, surface temperatures, and the solar wind interaction. The fulfillment of these measurement objectives will broaden our understanding of the Pluto system, such as the origin of the Pluto system, the processes operating on the surface, the volatile transport cycle, and the energetics and chemistry of the atmosphere. The mission, payload, and strawman observing sequences have been designed to achieve the NASA-specified measurement objectives and maximize the science return. The planned observations at the Pluto system will extend our knowledge of other objects formed by giant impact (such as the Earth–moon), other objects formed in the outer solar system (such as comets and other icy dwarf planets), other bodies with surfaces in vapor-pressure equilibrium (such as Triton and Mars), and other bodies with N₂:CH₄ atmospheres (such as Titan, Triton, and the early Earth).     

超高强度钢30CrMnSiNi2A的氢脆敏感性试验

采用延迟破坏、测氢含量、扫描电镜分析及冲击拉伸试验等方法,研究了超高强度钢30CrMnSiNi2A的氢脆敏感性。试验结果表明,30CrMnSiNi2A钢在甲醇或丙酮裂解气氛中保护加热油淬有明显氢脆现象,但只要及时回火,氢脆基本消除,性能达到合格。试验结果为生产提供了实验依据。     

德国机床工业的创新和趋势

机床是一个复杂的机电一体化系统.机床的创新离不开新结构、新材料、新的功能部件、新刀具和新的外围设备.加工工艺的发展以及加工过程的仿真和监控也日益受到重视.     

基于PHM技术的导弹维修保障

为解决传统导弹维修保障方法所存在的问题,加快军队信息化建设,提出了基于PHM技术的导弹维修保障方法。分析了不同维修方式、导弹维修保障及信息化建设与PHM技术的关系,利用PHM技术并结合决策支持的思想,建立导弹健康状态的信息管理系统,初步分析了系统的基本结构组成,并结合实际提出了一些需要重点解决的问题。     

最新高性能中速走丝电火花数控线切割机床

<正>秉承苏州三光精心制造的传统,苏州三光科技股份有限公司的产品始终将产品性能、可靠性放在首位。随着高品质产品所带来的市场高认可度,苏州三光的产品走进了越来越多的工厂和车间。同时,市场对高性     

用光学干涉方法对液相扩散传质过程的研究

液相中扩散传质过程研究无论对于基础理论还是生产实践都具有重要的意义。但在通常的重力环境中,传质过程不是单因素地由浓度梯度来决定,对流和沉降会对实验研究产生重要的干扰。通过光学干涉技术的应用,实现对于扩散过程中的传质系数进行测量,实验中采用Mach—Zehnder干涉仪对于整个传质过程进行监控并记录相关图像信息。这些图像信息是贯穿在整个实验过程中的连续录像,不同于其它实验记录的静态图像。通过计算这些随时间改变的干涉条纹的变化,就可以推导出传质系数的结果。实验液体选用水／葡萄糖溶液,之后还将进一步将该实验装置搭载TF-1火箭,进行微重力实验,以排除重力产生的影响。     

超声速混合层在强迫振动下流场结构的实验研究

通过可控振动系统激励双喷管后的薄平板,采用基于纳米粒子的平面激光散射技术(NPLS)观测超声速混合层流场结构。控制薄平板的频率和振幅,结合边缘检测技术研究了超声速混合层大尺度结构的发展和演化规律。实验结果表明:强迫振动对超声速混合层流场结构以及混合效率有重要的影响。与无振动相比,强迫振动增强了混合层的三维特性,混合层的失稳位置提前;同时,强迫振动促进了上下两层流动的掺混,高频振动下混合层增长速度提高约50%,有效增强了混合。     

尾缘锯齿降低叶栅噪声的数值模拟

采用大涡模拟与声类比的方法研究了尾缘锯齿对涡轮叶栅噪声的影响.设计了两种不同的尾缘锯齿,对比了Re=3.3×105(基于叶片弦长与叶栅出口速度)下两种不同结构锯齿尾缘叶栅与直尾缘叶栅的声功率.结果表明:尾缘锯齿可以降低叶片吸力面边界层分离噪声约5dB,降低尾缘涡脱落噪声约10dB.进一步的研究表明,尾缘锯齿可以降低叶片尾缘附近表面的压力脉动幅值约50%,将展向相关尺度较大的涡破碎成展向相关尺度较小的涡,并消除尾缘脱落涡,这三者的综合作用使噪声得到降低.      

MEMS惯性测量单元减振系统仿真分析

MEMS惯性测量单元使用MEMS仪表作为角速度和加速度传感器,该传感器对振动和冲击敏感,会引起惯性测量单元的测量误差.MEMS惯性测量单元多用于飞机、炸弹、导弹等振动环境恶劣的地方,因此减振器的设计尤为重要.减振器设计首先要明确惯性测量单元所处的振动环境,其次要明确MEMS惯性测量单元敏感的频点,最后明确惯性测量单元的质量、安装形式.设计了一种用于MEMS惯性测量单元的减振器,减振效率达75％,对振动和冲击均起到衰减的作用,衰减频带展宽,且在峰值的放大倍数低于3.5.     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.