Exosemiotics: an inter-disciplinary approach

Over the past several hundred years, many ideas have been expressed as to how human beings might communicate with extraterrestrials. These ideas have been put forth by experts from a diverse range of fields including physical scientists, mathematicians, behavioral scientists, philosophers and creative writers who have widely differing views on how to express ourselves coherently with civilizations from other worlds.This paper will look at some of these differing viewpoints and stress the need for an inter-disciplinary approach to the challenges of sending and, perhaps most important, receiving messages. Could we decipher a message if we got one? Who is doing the listening and what advantages could an inter-disciplinary approach bring to these efforts? What are some inter-disciplinary approaches to sending messages to extraterrestrials?     

光纤嵌入法监测复合材料固化的研究

通过嵌入光纤对芳纶／五氧复合材料板及环氧树脂浇注体的固化进行初步研究，结果表明，光纤嵌入法能准确监测出浇注体及芳纶／环氧复合材料的瞬时固化情况。     

Success criteria and risk management for the new millennium program

The National Aeronautics and Space Administration (NASA) New Millennium Program (NMP) is a technology development and validation program that will flight-validate advanced, new technologies with space flight applications. NMP's purpose is twofold. First, it will develop technologies that will enable future spacecraft to be smaller, more capable and reliable, and to be launched more frequently. Second, it will validate the technologies in flight to reduce the risks to future science missions that fly these technologies for the first time. To measure the program's success, NMP has devised a set of criteria that stresses the relevance of technologies selected for flight validation to NASA's 21st-century science mission needs. Also, NMP has instituted a ‘risk management’ policy, where, through a combination of adequate resources and early risk assessment and risk mitigation plans for the technologies, the overall risk of the NMP flights can be rendered acceptable.     

ESA's Biopan 1--"Vitamin" experiment preliminary results

The purpose of “Vitamin” experiment is to study the efficiency of protective substances on three biological acellular systems aqueous solutions exposed to cosmic radiation in space. The first system “LDL”is a low density lipoprotein. The second is “E2-TeBG complexe” in which estradiol (E2) is bound to its plasmatic carrier protein, testosterone-estradiol binding globulin (TeBG). The third is “pBR 322”, a plasmid. “Vitamin” experiment was accomodated in the Biopan which had been mounted on the outer surface of a Foton retrievable satellite. The experiment was exposed to space environment during 15 days. A stable temperature of about 20 °C was maintained throughout the flight. “Vitamin” experiment preliminary results are presented and discussed.     

Efficacy of Doppler ultrasound [correction of utrasound] for screening symptoms of decompression sickness during simulated extravehicular activities

Doppler ultrasound is frequently used for monitoring circulating microbubbles during decompression to assess the symptoms of Decompression Sickness (DCS). This analysis was carried out to evaluate its effectiveness for screening symptoms of DCS during simulated extravehicular activities (EVA). The information from various hypobaric chamber studies carried out at the NASA Johnson Space Center, Houston, TX was used in this analysis (n = 516). The circulating microbubbles were detected in the precordial area in 42% (218/516), and symptoms were reported in 16% (81/516) of these exposures. The accuracy of Doppler-detectable bubbles (Spencer grades) on all symptoms of DCS was examined by calculating measures of sensitivity and specificity. The efficacy of Doppler as a screening device was examined by calculating their positive predictive value (PPV) and negative predictive value (NPV). The results of these analyses indicated that the sensitivity of Doppler decreased, and the PPV increased with higher Spencer grades. However, the likelihood of detecting true negative cases (NPV) was consistently higher with all bubble grades. Due to the high false-positive rate and low prior probabilities of the risk of DCS, Doppler was found to be more useful to identify those who did not develop DCS, than to detect positive cases of DCS in the simulated EVA exposures.     

Ensuring equal access to the benefits of space technologies for all countries

There is a concern in the developing world that industrialized countries have not done all they might under Article 1 of the Outer Space Treaty to make the benefits of space technology available to all countries; some are now seeking codification of rights and responsibilities in this sphere. This article discusses recent debate on the issues by COPUOS and its Legal Subcommittee on whether an additional legal framework is necessary to ensure a fairer distribution of benefits. G77 countries were strongly in favour of some form of technology and information transfer, while industrialized countries favoured the existing practice of developing international cooperative space projects. The author believes that a new set of principles will be formulated in the next few years and that organizations like Intelsat and Inmarsat can provide valuable models for ensuring access through cooperative programmes.     

Thermal resistance in satellite mounting plates due to conductive heat transfer

The thermal resistance due to conductive heat transfer between two heat generating boxes mounted symmetrically on a thin mounting plate, one side of which is subjected to a constant heat flux and the opposite side is convectively cooled, is considered. The other two sides are maintained at constant temperature. A numerical solution for the temperature field is obtained and the heat transfer between the boxes is found by integrating between the critical heat flow lines. Various nondimensional parameters are identified and their influence on the thermal resistance is studied.     

Using computer graphics to enhance astronaut and systems safety.

Computer graphics is being employed at the NASA Johnson Space Center as a tool to perform rapid, efficient and economical analyses for man-machine integration, flight operations development and systems engineering. The Operator Station Design System (OSDS), a computer-based facility featuring a highly flexible and versatile interactive software package, PLAID, is described. This unique evaluation tool, with its expanding data base of Space Shuttle elements, various payloads, experiments, crew equipment and man models, supports a multitude of technical evaluations, including spacecraft and workstation layout, definition of astronaut visual access, flight techniques development, cargo integration and crew training. As OSDS is being applied to the Space Shuttle, Orbiter payloads (including the European Space Agency's Spacelab) and future space vehicles and stations, astronaut and systems safety are being enhanced. Typical OSDS examples are presented. By performing physical and operational evaluations during early conceptual phases. supporting systems verification for flight readiness, and applying its capabilities to real-time mission support, the OSDS provides the wherewithal to satisfy a growing need of the current and future space programs for efficient, economical analyses.     

Orbital and relative motion of a tethered satellite system

A simplified model for the orbital and relative motion of a tethered satellite system is presented. The tether acts as a light elastic string with small structural damping but without bending stiffness. Its mass is taken into account in the calculation of the total kinetic and potential energies of the tethered system. This formulation allows the inclusion of the complete gravity gradient influence on the dynamics of the system. The resulting three-dimensional motion is separated in the centre of mass orbital motion on the one hand and the relative motion of the end-bodies on the other. No restrictions on length of the tether or on mass ratio of the end-masses are imposed. It is found that the frequencies and amplitudes of the longitudinal tether oscillations are realistic as long as the tether mass is less than that of the subsatellite.     

Aeroshell design techniques for aerocapture entry vehicles

A major goal of NASA's In-Space Propulsion Program is to shorten trip times for scientific planetary missions. To meet this challenge arrival speeds will increase, requiring significant braking for orbit insertion, and thus increased deceleration propellant mass that may exceed launch lift capabilities. A technology called aerocapture has been developed to expand the mission potential of exploratory probes destined for planets with suitable atmospheres. Aerocapture inserts a probe into planetary orbit via a single pass through the atmosphere using the probe's aeroshell drag to reduce velocity. The benefit of an aerocapture maneuver is a large reduction in propellant mass that may result in smaller, less costly missions and reduced mission cruise times. The methodology used to design rigid aerocapture aeroshells will be presented with an emphasis on a new systems tool under development. Current methods for fast, efficient evaluations of structural systems for exploratory vehicles to planets and moons within our solar system have been under development within NASA having limited success. Many systems tools that have been attempted applied structural mass estimation techniques based on historical data and curve fitting techniques that are difficult and cumbersome to apply to new vehicle concepts and missions. The resulting vehicle aeroshell mass may be incorrectly estimated or have high margins included to account for uncertainty. This new tool will reduce the guesswork previously found in conceptual aeroshell mass estimations.