Output of a Balanced Frequency Discriminator Driven by a Sine Wave and Gaussian Noise

The output of a realizable balanced frequency discriminator is calculated for an input consisting of a sine wave plus Gaussian noise. Explicit autocorrelation and power spectra are found for one practical embodiment of the discriminator for various input carrier-to-noise ratios, with the carrier tuned to center frequency and also off-center. The formulas also permit the calculation of the output for the case of a spectrum of noise slowly swept through the discriminator. Although qualitatively similar to results previously obtained with an ideal discriminator, substantial differences are also found. Measurements are made that closely verified the theoretical results. No limiting is assumed.     

Soho Observations of Density Fluctuations in Coronal Holes

In recent UVCS/SOHO White Light Channel (WLC) observations we found quasi-periodic variations in the polarized brightness (pB) in the polar coronal holes at heliocentric distances of 1.9 to 2.45 solar radii. The motivation for the observation is the 2.5D MHD model of solar wind acceleration by nonlinear waves, that predicts compressive fluctuations in coronal holes. In February 1998 we performed new observations using the UVCS/WLC in the coronal hole and obtained additional data. The new data corroborate our earlier findings with higher statistical significance. The new longer observations show that the power spectrum peaks in the 10–12 minute range. These timescales agree with EIT observations of brightness fluctuations in polar plumes. We performed preliminary LASCO/C2 observations in an effort to further establish the coronal origin of the fluctuations. This revised version was published online in June 2006 with corrections to the Cover Date.     

Radio observations of Venus and the interpretations

The radio observations of Venus are reviewed and compared with theoretical microwave spectra computed for a variety of models of the Venusian environment. The models considered are (a) a CO₂-N₂ atmosphere, (b) an atmosphere of dust (the aeolosphere model), and (c) a cloud model with various loss mechanisms in the cloud. The effect of polarization on the surface emissivity has been included in all the computations. It is shown how the radio observations place limits upon the acceptable models, for example, the density and size of dust particles required in the aeolosphere model. It is shown how some models place severe restrictions on radar observations at short centimeter wavelengths, thereby emphasizing the importance of such experiments. These same models show that the Mariner II observations can not be interpreted in terms of surface phenomena and provide a new interpretation for the microwave phase effect.This work was supported in part by the U.S. Army, Navy and Air Force under Contract DA36-039-AMC-03200(E); and in part by the National Aeronautics and Space Administration (Grants NsG-250-62 and NsG-419).     

Phase Compensation for Widely-Spaced Antenna Systems Employing Coherent Signal Combinations

This paper describes a technique for providing phase compensation to signals received at widely-spaced antennas and processed at a central location. Self-compensation is provided for pathlength variations in reference-signal distribution systems. The technique may be adapted to include the measurement and compensation of signal-channel phase variations. Practical systems which require this type of compensation include interferometric systems used for position and position-rate measurements of missiles and spacecraft, interferometers and arrays of antennas used for radio and radar astronomy, and arrays of large-aperture antennas used for deep-space communications.     

Resonant Cavity Measurements of Ionized Wakes

A transmission resonant cavity technique, which is suitable for making measurements of electron line densities and collision frequencies in the ionized wakes of hypervelocity projectiles, is described. With this method electron density measurements can be made over six orders of magnitude. Resonant cavity design requirements and limitations of the method are discussed. Typical data from measurements behind projectiles traveling at speeds up to 6.5 km/s are given.     

Analysis of Performance Degradation in CdS Solar Cells

The effect of changes in five physically meaningful parameters on the I-V (current-voltage) curve of a CdS solar cell is calculated. Comparisons between the calculated data and performance data obtained from degraded solar cells are made. The parameter that changed to cause the degradation in each cell becomes apparent.     

Analysis of a Class of Nonlinear Sampled-Data Systems with a Gaussian Input Signal

The problem treated here is the analysis of a class of nonlinear sampled-data systems with a Gaussian input signal. The nonlinear element is a symmetrical limiter (memoryless device) that feeds the linear element. Preceding the limiter is a sampler and zero-order hold unit for data reconstruction. The analysis is predicated on finding an equivalent gain for the nonlinear element such that the mean-square error is a minimum. The nonlinearity is thus replaced by a linear component and the system is then analyzed by conventional techniques. It is also shown that for appropriate sampling rates the sampled-data system is equivalent to a continuous system due to the action of the sampler-hold combination. All calculations pertaining to the limiter input signal require the use of a transfer function that is interior to the feedback loop. However, in developing this transfer function, the overall system is considered so that the system output may be evaluated after the value of equivalent gain has been found.