On-Line Computer for Transient Turbine Cascade Instrumentation

A 32-channel computer based data acquisition and processing system em has been developed for use with the new type of transient cascade facility at Oxford. This is used for testing turbine blades and nozzle guide vanes at full-scale engine Reynolds and Mach numbers ers with correct wallto-flow temperature ratios. A novel technique for processing transient heat transfer data from thin film surface resistance thermometers has been developed. Measurements of surface ace pressure around blades, and of the upstream turbulence level have been made. The cascade and instrumentation are shown to have advantages both in cost and effectiveness over continuous running cascades.     

A New Mathematical Formulation for Strapdown Inertial Navigation

A differential equation is developed for the orientation vector relating the body frame to a chosen reference frame. The time derivative of this vector is the sum of the inertially measurable angular velocity vector and of the inertially nonmeasurable noncommutativity rate vector. It is precisely this noncommutativity rate vector that causes the computational problems when numerically integrating the direction cosine matrix. The orientation vector formulation allows the noncommutativity contribution to be isolated and, therefore, treated separately and advantageously. An orientation vector mechanization is presented for a strap down inertial system. Further, an example is given of the applica tion of this formulation to a typical rigid body rotation problem.     

Nonlinear Estimation Via Kalman Filtering

The extended Kalman-Bucy filtering algorithm is applied to the problem of estimating the system parameters of a single-channel missile attitude control system. In particular, noisy observations of body angular rate, normal acceleration, and control surface deflec tion are used in the algorithm to obtain estimates of body angular rate, angle of attack, control surface deflection, air density, and missile velocity. Computational results obtained for this problem are presented. These results are evaluated to determine the applicapility of this estimator as a part of an adaptive control scheme. In addition, a general approach to the formulation of practical nonlinear estimation problems is suggested.     

The Calculation of Frequency-Modulation Distortion in Linear Networks

A numerical method is developed for the calculation of steady-state FM distortion in a linear passive network from the character of the FM signal input and the steady-state transfer characteristics of the network. The method of calculating FM distortion requires the solution of a finite set of linear equations which is accomplished readily by a digital computer. To illustrate the use of the method, the FM distortion introduced by a Chebyshev-response bandpass filter is calculated for a range of network and input signal parameters.     

Error Analysis of Space-Stable Inertial Navigation Systems

The error equations for a space-stable inertial navigation system are derived. This is done by directly perturbing the mechanization equations in the inertial frame and then transforming in open-loop fashion to the local-level frame. A rotating inertial platform and velocity and altitude damping are considered. The relations between errors in space-stable and local-level systems are noted. Numerical results are presented for certain random error sources.     

The Detection Performance of the Siebert and Dicke-Fix CFAR Radar Detectors

The Siebert and the Dicke-fix CFAR radar detectors, used to maintain a constant false alarm rate (CFAR) in radar receivers under very similar circumstances, are considered. The Siebert detector represents the maximum-likelihood detection procedure for a signal in Gaussian noise of unknown power level, whereas the Dicke-fix makes use of a bandpass limiter to normalize the input and thus ensure a constant false alarm rate. The detection performance of the two detectors is determined and a comparison shows that over a wide range of parameters, the Dicke-fix introduces a loss which is approximately 1 B larger than for the Siebert detector.     

A Closely Regulated TWT Converter

The design concept for the traveling wave tube amplifier converter for possible use in the Thermoelectric Outer Planet Spacecraft (TOPS) is presented. An unusual combination of semiconductors and magnetics were utilized to achieve very stable voltage regulation on a number of separate outputs to satisfy the requirements of a high-power traveling wave tube (TWT), and at the same time operate at an efficiency of better than 90 percent from a 30-volt source. The circuitry consists of an output filter, an auxiliary Jensen oscillator driving a high-reactance transformer to provide current limiting to the heater, a variable time delay, a main Jensen oscillator driving the power transformer with a maximum step-up ratio of 120 to 1, and series transistorized post regulators to provide precise voltage adjustment and low output impedance. This paper discusses the design of the high-reactance transformer and the high step-up ratio transformer, as well as the high-voltage series regulators that are limited in range and operate at the top of the unregulated output voltage. Test data is presented, and details of current transients caused by charging the filter circuits, input current ripple, and output voltage ripples are considered. The circuit provides better than 0.5 percent regulation against load change, input voltage change, and over-operating temperature range of from -20 to + 80°C, with output ripple voltage of less than 2 volts peak-to-peak on top of the 3600-Vdc output. The measured efficiency was typically 87 percent. and recommendations are included to improve this to in excess of 90 percent.     

A Major Step in Series Regulators

Power hybrid microelectronic design techniques have been developed to satisfy the requirements of 10-ampere 100-watt series voltage regulators. Application of these new techniques has resulted in a package occupying roughly the same volume as a TO-63 power transistor, yet containing two 30-ampere power transistors, selectable external components, and associated control circuitry.