RDX/AP 复合推进剂中声不稳定性的微粒抑制

为了说明微粒对于环三甲撑三硝胺(RDX)/过氯酸铵(AP)复合推进剂燃烧时观察到的高频燃烧不稳定的抑制作用,进行了本项实验研究。实验中看到了很高频率的燃烧不稳定,它是在推进剂药柱的圆形孔道中发生的10-30KH_2范围的横向波。这种不稳定性可以通过添加少量固体微粒而被有效地消除。燃烧不稳定区已确定为微粒大小和浓度的函数。在压力—微粒浓度曲线上确定了发生不稳定燃烧的临界范围。根据 Horton 和 McGie 的微粒抑制理论计算出临界条件下的抑制常数(α_(p.(?))),并由假设(α_(p.(?)))=-α_g 求出推进剂的增长常数(α_g)。     

固体推进剂药柱结构安全裕度预测方法述评

当前,各工业公司用来预测固体推进剂药柱结构安全裕度的方法各不相同。虽然他们所用的计算公式均很相似,但针对具体问题算得的安全裕度值却是有正有负。事实上,这一问题已成为发动机药柱设计结构完整性评定工作产生混乱的根源。本文评论了影响安全裕度计算的各项参数,即破坏准则、结构分析方法、推进剂响应和破坏特性。本文还鉴别和讨论了与上述参数有关的技术问题,提出了今后研究工作中应予关注的问题。     

电子战系统的接收装置

详细介绍了晶体视频放大接收机、布雷格小室接收机和照射告警接收机等6种电子战接收机的功用、主要性能和优缺点,给出了它们的比较结果.指出改善电子战接收机性能的主要途径是在现行方案中加装毫米波通道.最后讨论了告警接收机的三种可能的方案.     

自聚焦与超分辨率合成孔径雷达成像

构想了一种基于快速傅立叶变换（FFT）的用于合成孔径雷达（SAR）成像横向距离相位误差补偿的参量算法，称做MCCLEAN。这种算法可用做大范围场景SAR成像的一种单独的自聚焦方法。本文作者同时还给出了一种具有类似结构的算法，该算法可对大范围场景中感兴趣的小场景或小区域（ROI）同时进行自聚焦与超分辨率SAR成像，并给出了一些例子以说明这两种算法的性能。     

机载阵列雷达抑制运动杂波的学习算法

一种称为自适应空时处理器(STP)的线性滤波器是一种相对比较新的方法，它使机载阵列天线雷达目标检测概率达到最大。理论上，全自适应STP可以实时获得最优解(一种维恩滤波器)。但是，实际上全自适应STP也存在一些问题。首先，线性滤波器的加权数可能非常大。其次，单一加权矢量的计算复杂度大约为O(MN)^3。再次，STP为线性滤波器但却工作在非线性不稳定的环境中。这些问题导致采用空时处理器传统技术的实时、最佳处理是现行计算技术内所不及的。为使运动杂波对目标检测的影响最小，本文探讨了人工神经网络和几种学习算法的可应用性。人工神经网络是一种自适应、并行、分布式处理系统，可以实时完成复杂计算。学习算法的机理是为了存储新的信息或变更信息，人工神经网络中的长期存储器要不断更新而又不被破坏。由于学习算法既能在系统的使用期内保留信息又能变更信息，所以对雷达系统的计算要求降到了最低，同时还能适应环境的变化。     

火箭发动机聚氨酯包复层配方

本发明叙述制造固体推进剂发动机用的聚氨酯配方,着重叙述火箭发动机燃烧室即壳体的完全固化包复层。由于种种原因,固体推进剂发动机需要有包复层,使发动机壳体具有不透气性;在壳体与推进剂之间形成一层绝热薄膜;并作为壳体与推进剂之间增强推进剂粘结的中间层。业已     

二相流的最大推力喷管

本文针对在流场中含有凝态和固态颗粒的最大喷管设计进行了最佳分析。编制一套设计程序,程序中分析一个假定的喷管形状,确定它是否为最大推力喷管,若不是,就用松弛法修正假定的形状,直到获得最大推力喷管为止。参数的研究说明颗粒尺寸、喷管收敛角、喉部曲率半径、颗粒阻力、热传递系数、颗粒与气体质量流量比以及喷管尺寸的影响。     

火箭发动机壳体爆破实验时的声发射

1.引言用声发射(AE)技术对压力容器和压力边界进行结构评价是声发射的应用中很有吸引力的领域之一。本文介绍了由NAIS系统最先提出的评价缺陷程度的方法应用于东京大学的M—13火箭发动机壳体的爆破实验的情况,目的是为了评价由于水压压力上升时该发动机壳体的有害度,而且讨论了断口特征和得到的声发射结果之间的关系。更进一步讨论了在高压     

Supercooled water brines within permafrost-an unknown ecological niche for microorganisms: a model for astrobiology

This study describes brine lenses (cryopegs) found in Siberian permafrost derived from ancient marine sediment layers of the Arctic Ocean. The cryopegs were formed and isolated from sediment ~100,000-120,000 years ago. They remain liquid at the in situ temperature of -10 degrees C as a result of their high salt content (170-300 g/L). [(14)C] Glucose is taken up by the cryopeg biomass at -15 degrees C, indicating microbial metabolism at low temperatures in this habitat. Furthermore, aerobic, anaerobic heterotrophs, sulfate reducers, acetogens, and methanogens were detected by most probable number analysis. Two psychrophilic microbes were isolated from the cryopegs, a Clostridium and a Psychrobacter. The closest relatives of each were previously isolated from Antarctica. The cryopeg econiche might serve as a model for extraterrestrial life, and hence is of particular interest to astrobiology.     

Application of the mechanical oscillator technique to the investigation of EVA decompression

The ultrasonic bubble detection technique has been used as a versatile tool in the investigation of hypobaric decompression procedures for the last two decades. However, this method can only detect relatively large bubbles > 30-50 micrometers (usually in venous blood) and not the very first stages of bubble formation. Recently, the mechanical oscillator technique has been applied in air diving trials in order to detect small blood density changes due to hypothetical fluid shifts. However, sharp density drops were found in the decompression process, and these have been attributed to gas bubble formation. In this study, this method was applied together with Doppler controls to a series of altitude decompressions to 300 and 500 hPa, which represents the range of EVA operational pressures currently used or planned. Six subjects participated in both series; the oscillator sample tube could be pressurized. By the application of pressure on a blood sample containing questionable gas bubbles, these are reduced in volume, like in recompression therapy, and thus the density of the sample is increased. This effect has been shown in all 6 subjects undergoing decompression to 300 hPa, whereas in the 500 hPa series only 3 out of 6 subjects corresponded with gas phase formation immediately after decompression. Typically, Doppler bubbles appeared only after some latency time between 20 and 60 min; after this time, the density effect had nearly vanished. It is concluded that the mechanical oscillator technique represents a complementary research instrument to the Doppler method, because it is able to deliver a quantitative resolution of the early stage of gas phase formation.