Experimental study of damping properties of a composite torsion bar in the helicopter main rotor hingeless hub

The results of the experimental studies of damping characteristics of a composite torsion bar in the helicopter main rotor hingeless hub are presented. A variant of their improvement is considered.     

Analysis of shells of revolution under symmetrical loading using the quadrature method

The application of the quadrature method [1] to analyzing the shells of revolution under symmetrical loading relative to the zero meridian is considered. The method can be treated as a generalization of the method presented in [2] to solve the Volterra integral equation of the second kind.     

Airborne radar: its beginnings in World War II

Although not realized at the time, the defeat of the German Air Force in the summer of 1940 was one of the crucial battles of World War II. The narrow margin of victory can be ascribed to Britain's air-warning radar, Chain Home (CH), consisting of the 15-meter CH and the 1.5-meter CHL. The skillful use of this equipment by the Royal Air Force made daylight bombing unsustainable; the Luftwaffe then turned to night attacks, generally called "The Blitz." These were not effective in destroying military and industrial targets and depended on the hope of reducing the population's will to fight. Chain Home was of little use except to observe the attackers arrival, as it had almost no ability to follow the attackers as they proceeded inland. This eventuality was reckoned with before the outbreak of hostilities and had called for radars mounted in night fighters capable of guiding the pilot close enough to the target for him to open fire visually. The electronic techniques used at 1.5-meters were adapted to planes capable of carrying the radar and its operator. But there were three important design constraints: 1) the antennas had to be restricted to sizes that were practical for installation on aircraft, which for meter waves gave them low gain and large side lobes; 2) the set's maximum range was limited by the fighter's altitude as a result of the huge ground returns from the side lobes. British antiaircraft artillery, the stepchild of their arms, was too ineffective to drive the bombers to extreme altitudes; and 3) a minimum range had to be held until the flier could see his target, which strained the pulse techniques of the time.     

Automotive-grade MEMS sensors used for general aviation

The attitude heading reference system (AHRS) provides data for primary flight instruments, head-up displays, autopilots, and moving map navigation systems. Advances in solid-state MEMS rate sensors, coupled with Kalman filter algorithms designed to mitigate high drift rates, provide the basis for low-cost, high-performance AHRS for general aviation. This paper describes the performance of a low cost, miniaturized AHRS using automotive-grade MEMS sensors. The performance of the system is detailed. The implications for certification of this class of system and fault tolerance are discussed.     

Microdosimetric measurements of heavy ion tracks.

The biological effectiveness of radiations depends on the spatial pattern of ionizations and excitations produced by the charged particle tracks involved. Ionizations produced by both the primary ion and by energetic delta rays may contribute to the production of biologically relevant damage and to the concentration of damage which may effect the probability of repair. Although average energy concentration (dose) can be calculated using homogeneous track models, the energy is actually concentrated in small volumes containing segments of the ion and delta ray tracks. These local concentrations are studied experimentally using low pressure proportional counters, and theoretically, using Monte Carlo methods. Small volumes near an ion track may be traversed by a delta ray. If they are, the energy deposited will be similar to that produced by a single electron track in a low-energy x-ray irradiation. The probability of a delta ray interaction occurring decreases with the square of the radial distance from the track. The average energy deposited is the product of this probability and the energy deposited in an interaction. Average energy deposited calculated from measured interaction probability is in good agreement with the results of homogeneous track models.     

Carbon dioxide and oxygen budgets of a plant cultural system in a CELSS--a case of cultivation of lettuce and turnips.

In order to collect basic data about CO2 and O2 budgets of a plant cultural system in a CELSS, the variation of the CO2 absorption rates of lettuce and turnips were observed during the growing period, under different conditions. The O2 release rates were deduced from the CO2 absorption rates multiplied by 32/44. As a result, when the light intensity, the photoperiod and the atmospheric CO2 concentration increased, the rates also increased. The effects on the turnips were more significant than those on the lettuce. Turnips at 310 micromoles/m2/s of PPFD, 24 hours of photoperiod and 1100 ppm of CO2 concentration grew most actively in the present experimental conditions. One turnip absorbed 32.3 g CO2 and released 23.5 g O2 for 6 days between 24 days and 30 days after sowing.     

Monte Carlo transport model comparison with 1A GeV accelerated iron experiment: heavy-ion shielding evaluation of NASA space flight-crew foodstuff.

Deep-space manned flight as a reality depends on a viable solution to the radiation problem. Both acute and chronic radiation health threats are known to exist, with solar particle events as an example of the former and galactic cosmic rays (GCR) of the latter. In this experiment Iron ions of 1A GeV are used to simulate GCR and to determine the secondary radiation field created as the GCR-like particles interact with a thick target. A NASA prepared food pantry locker was subjected to the iron beam and the secondary fluence recorded. A modified version of the Monte Carlo heavy ion transport code developed by Zeitlin at LBNL is compared with experimental fluence. The foodstuff is modeled as mixed nuts as defined by the 71st edition of the Chemical Rubber Company (CRC) Handbook of Physics and Chemistry. The results indicate a good agreement between the experimental data and the model. The agreement between model and experiment is determined using a linear fit to ordered pairs of data. The intercept is forced to zero. The slope fit is 0.825 and the R2 value is 0.429 over the resolved fluence region. The removal of an outlier, Z=14, gives values of 0.888 and 0.705 for slope and R2 respectively.     

Satellite mobile communications spread-spectrum receiver

Since 1999, ESA has conducted a number of system studies and technological developments to support the European and Canadian industry in the definition of a Satellite UMTS (S-UMTS) component development strategy, identifying critical technological areas and promoting S-UMTS demonstrations. In particular, the MUSIC project has successfully demonstrated advanced digital signal processing techniques to mitigate CDMA interference in spread-spectrum receivers, thus increasing the capacity and/or quality of service of a wireless communication network. The low-complexity solution for interference mitigation investigated and developed in the project is particularly suited for being implemented in mobile terminals.     

Morphological synthesis method of search for promising technicalsystem

The work studies the application of the morphological (structural) synthesis method of search for the new technical approaches. The method is based on the application of the theory of system, morphological and cluster analysis, methods of mathematics simulation and calculation experiments made by computer. The work shows how this method is used to synthesize the landing spacecrafts, hypersonic spacecrafts and medical equipment and gives the comparison of the present and synthesized technical systems (TS). The conclusion is that this method increases the degree of the validity decision made and broadens the number of possible variants which allows an increase in the quality (technical level) of the TS under development. The work also points out that the method allows the system to search for promising inventions to solve the problems of prognostication and to single out the trends of TS evolution. It also allows the system to single out these systems which are able to respond flexibly to the changing external conditions with the lowest expense, and therefore, increases the compatibility of the chosen TS