The Plasma Environment of Comet 67P/Churyumov-Gerasimenko Throughout the Rosetta Main Mission

The plasma environment of comet 67P/Churyumov-Gerasimenko, the Rosetta mission target comet, is explored over a range of heliocentric distances throughout the mission: 3.25 AU (Rosetta instruments on), 2.7 AU (Lander down), 2.0 AU, and 1.3 AU (perihelion). Because of the large range of gas production rates, we have used both a fluid-based magnetohydrodynamic (MHD) model as well as a semi-kinetic hybrid particle model to study the plasma distribution. We describe the variation in plasma environs over the mission as well as the differences between the two modeling approaches under different conditions. In addition, we present results from a field aligned, two-stream transport electron model of the suprathermal electron flux when the comet is near perihelion.     

INTERBALL statistical study of ion flow fluctuations in the plasma sheet

We use ion distribution measurements with CORALL instrument on-board the INTERBALL/Tail spacecraft to study plasma flows in the mid-tail (−9> X> −27 R_E) plasma sheet. Three velocity components computed every 2 minutes exhibit two types of velocity variations: Earthward bursty bulk flows (BBFs) and random flow fluctuations. Their properties are in a good agreement with the observations of the ISEE-2 spacecraft (Borovsky et al., 1997). The INTERBALL/Tail spacecraft configuration favors measurements of V_z component, in contrast to previous experiments in which only V_x and V_y were measured reliably. In the outer part of the plasma sheet V_y and V_z fluctuations were close to each other (variances σ(V_y) and σ(V_z) were about 160 and 110 km/s, respectively), but in the inner part at the dusk flank amplitude of V_y fluctuations increased and was 2 times higher than that of V_z component. This asymmetry of fluctuations should be taken into account during modern theoretical analysis and simulations.     

Cometary atmosphere (gas and dust)

There is important progress now in the identifications and measurements of primary (parent) molecules in the inner coma of Comet Halley. H₂O, CO₂ and CO are definitely in the list, CH and some complicate organic molecules are suspected. Gas production rate for water vapor is Q_H2O 10³⁰ s⁻¹. The bulk of data doesn't contradict to the Whipple model of nucleus (with clathrate modification). Pronounced spatial structure of gaseous flow in the coma was observed, but in general measured properties of neutral gas in the coma of Comet Halley are not very different from predicted. Situation for dust is different. In situ dust measurements show that size spectrum and optical properties of particles in coma are substantively declining from predicted on the base of groundbased photometry. However there are discrepancies between Vega and Giotto dust counter data. Dust in the inner coma didn't prevent the succesful imaging of nucleus by TV on Vega 1 and 2.     

Current collection through the transport of electrons across magnetic field lines

Collection of electrons by a long conducting cylinder in a flowing plasma is studied by means of numerical simulations. The plasma flow simulates the relative motion between a spacecraft and plasma. The sheath structures and the levels of electron current collections for the cases with and without an ambient magnetic field ( ) are studied. It is found that for the flow perpendicular to the magnetic field, the current is considerably enhanced depending on the relative drift velocity. In the case of a non-zero magnetic field perpendicular to the cylinder axis, the potential structure is a two-dimensional double layer with dimensions L L_|, where L and L_| are the dimensions perpendicular and parallel to , respectively. L is found to be the current limiting radius given by the Parker-Murphy model. For the flow along , the electron current is found to be smaller than that for the flow perpendicular to . This is explained in terms of the potential structures.     

On Relationship of Flow Swirl Parameters and Gas-Dynamic Efficiency of Gas Turbine Engine Interturbine Transition Duct

The paper highlights significance of the interturbine transition duct as part of the high pressure and low pressure turbine spool. The correlations have been suggested allowing us to estimate variation of the average cross section flow swirl while its passing the interturbine transition duct.     

An approach to forming the design performance of the attitude control system for small spacecraft

The elements for various types of attitude control systems used in a number of small spacecraft are considered. An approach for assessment of such system effectiveness based on design requirements for spacecraft purpose and restriction in accuracy, mass and energy is proposed.     

Approximate analytical solutions of stability problems for skew plates under combined loading

The known analytical solutions of the linearized stability problems for rectangular hinged plates under the combined loading are generalized to the similar problems for skew plates, the deformation mechanics of which is described by the equations of the classical theory formed in the oblique Cartesian coordinates.     

Experimental study of radial temperature gradient-reducing devices in GTE rotor disks

In this paper, we examine experimentally some devices the principle of action of which is based on using the dynamic pressure of air extracted to engine cooling and which are meant for reducing the radial temperature gradient in GTE rotor disks. We established that the devices equipped with the ejector channels make it possible to accelerate the process of the disk hub heating by hot air suction from the cavity periphery towards the rotor axis of rotation. Using the data of visualization studies, we show the possibility for efficient operation of ejector devices in the conditions of real GTE rotor circumferential velocities.     

Optimization of electrode system for the aircraft time-of-flight ion-marking airspeed and angle of attack sensor

A technique of optimizing the electrode system of the differential recorder for the aircraft time-of-flight ion-marking airspeed and aircraft angle of attack sensor by the criterion of ion-marking recording error variance minimum is considered. The technique is based on analyzing the function of spatial distribution for the ion-marking and recorder electrode interaction field potential and determining a point for which this function reaches the maximum slope. The relations making it possible to synthesize the sensor electrode system by the complex criterion as a ratio of error variance to transformation channel response are obtained.     

A lower bound estimate of the critical load for helicopter main rotor composite blade according to the limit equilibrium theory. The basic steps of an algorithm

The basic steps of an algorithm are given for calculating the parameters of the limiting state of a helicopter main rotor blade. To estimate the static strength, a technique of elastic constants variation is used; it is based on the limit equilibrium theory and enables us to obtain the upper and lower bounds for the critical load simultaneously. An iterative technique is proposed to determine the lower bound of the allowable load on the root section of the composite blade depending on the azimuthal angle of its turn in the helicopter hovering mode.