Time-dependent dynamical behavior of surface tension on rotating fluids under microgravity environment

Time dependent evolutions of the profile of free surface (bubble shapes) for a cylindrical container partially filled with a Newtonian fluid of constant density, rotating about its axis of symmetry, have been studied. Numerical computations of the dynamics of bubble shapes have been carried out with the following situations: (1) linear functions of spin-up and spin-down in low and microgravity environments, (2) step functions of spin-up and spin-down in a low gravity environment, and (3) sinusoidal function oscillation of gravity environment in high and low rotating cylinder speeds. The initial condition of bubble profiles was adopted from the steady-state formulations in which the computer algorithms have been developed by Hung and Leslie/1/, and Hung et al./2/     

Eutectic solidification of Al-Cu alloys influenced by convection

Directional solidification of eutectic Al-Cu alloys has been studied to demonstrate the influence of both impurity concentration and convective conditions. The λ/R relations show that higher iron concentration and intensive stirring coarsen the microstructure. The formation and growth of new iron-containing phases at the solidification front restrict impurity influence. Kinetic data follow a dependence λ.Rⁿ=const with n-value close to 0,5.     

Combination probe for hi-frequency unsteady aerodynamicmeasurements

A combination probe for time-resolved measurements of unsteady compressible flows in transonic wind tunnels is described. The probe measures stagnation (total) temperature and pressure, static pressure, and flow angles in two planes. From these, the fluctuating mass flux, Mach number, and velocity, as well as their components in three directions, can be deduced. The combination probe consists of a dual hot-wire aspirating temperature and pressure probe mounted piggyback with a high-frequency angle probe. The angle probe has four surface-mounted silicon pressure sensors. A scheme for retrieving from the four pressure signals the stagnation and static pressures. Mach number, and flow angles in two planes, is described. The calibrations forming the base for this procedure, obtained from steady-state tests, are given. Typical data obtained in the Karman vortex street shed from a cylinder and at the exit of a Mach 0.4 air jet are presented     

A chirp scaling approach for processing squint mode SAR data

Image formation from squint mode synthetic aperture radar (SAR) is limited by image degradations caused by neglecting the range-variant filtering required by secondary range compression (SRC). Introduced here is a nonlinear FM chirp scaling, an extension of the chirp scaling algorithm, as an efficient and accurate approach to range variant SRC. Two methods of implementing the approach are described. The nonlinear FM filtering method is more accurate but adds a filtering step to the chirp scaling algorithm, although the extra computation is less than that of a time domain residual compression filter. The nonlinear FM pulse method consists of changing the phase modulation of the transmitted pulse, thus avoiding an increase in computation. Simulations show both methods significantly improve resolution width and sidelobe level, compared with existing SAR processors for squint angles above 10 deg for L-band and 20 deg for C-band     

Cramer-Rao bounds and estimation of the parameters of the Gumbeldistribution

Maximum Likelihood (ML) algorithms and Cramer-Rao (CR) bounds for the location and scale parameters of the Gumbel distribution are discussed. First we consider the case in which the scale parameter is known, obtaining the estimator of the location parameter by solving the likelihood equation and then evaluating its performance. We next consider the case where both the location parameter and the scale parameter are unknown and need to be estimated simultaneously from the reference samples. For this case, performance is analyzed by means of Monte Carlo simulation and compared with the asymptotic CR bound     

Bistatic RCS of Complex Objects near Forward Scatter

A technique is presented for predicting the bistatic radar cross section (RCS) of an opaque, arbitrarily shaped object at angles near forward scatter. Babinet's principle is employed to approximate the object's scattering pattern as the two-dimensional Fourier transform of its silhouette. Calculations for spheres and right-circular cylinders are shown to agree with predictions based on exact Mie theory, method of moments, and physical optics. Restrictions on the applicability of the method are presented.     

EXOSAT spectra of some bright QSO's

This paper reports on EXOSAT observations of four bright QSO's and active galaxies. The QSO PHL 1657 has a simple spectrum that can be fit with power law plus some low energy absorption. A soft excess is observed for both MR 2251 and E 1352.24+1830. Finally, PKS 2126-158 was detected and the results are consistent with a 0.7 energy index.     

Optimal Design Strategy of Switching Converters Employing Current in jected Control

This paper analyzes a buck/boost regulator employing current-injected control (CIC). It reveals the complex interactions between the dc loop and the current-injected loop and underlines the fundamental principle that governs the loop gain determination. Three commonly used compensation techniques are compared. The integral and lead/lag compensation are shown to be most desirable for performance optimization and stability.     

Comet Halley: Nucleus and jets (results of the VEGA mission)

The VEGA-1 and VEGA-2 spacecraft made their closest approach to Comet Halley on 6 and 9 March, respectively. In this paper those results of the onboard imaging experiment which were obtained around closest approach are discussed. The nucleus of the comet was clearly identifiable as an irregularly shaped object, with overall dimensions of (16±1)×(8±1)×(8±1) km. The nucleus rotates in the prograde sense about an axis nearly perpendicular to the orbital plane with a period of 53±2 hours. Its albedo is only $\text{0.04±}\text{0.02}\text{0.01}$ Many of the jet features observed during the second fly-by have been spatially reconstructed. Their sources form a quasi-linear structure on the surface. The dust above the surface is shown to be generally optically thin with the exception of certain specific dust jets. Brightness features on the surface are clearly seen. Correlating our data with other measurements, we conclude that the dirty snow-ball model will probably need to be revised.     

An overview of Allied-Signal's avionics development in the CIS

AlliedSignal Commercial Avionics Systems (ASCAS) and its partners have established the following business objectives: short term (forward-fit and retrofit with off-the-shelf products; co-development of integrated systems); mid term (co-production of avionics products in the CIS); long term (become an integrated element of CIS aerospace industry in partnership with local firms and to maintain the necessary focus to achieve these goals). ASCAS has formed a strategic business enterprise which is dedicated to developing the avionics market within the CIS. ASCAS was fortunate to find a joint venture partner who possesses skills that complement its present core competencies. The advantage of this business arrangement is that, while expanding their experience and expertise in the area of systems integration, they can directly benefit from the expertise and capabilities of indigenous airframe and equipment manufacturers (customer knowledge, simulation and integration experience, capable/skilled manpower)