室温贮存对树脂粘度和加压点的影响

讨论了５４０５改性双马来酰亚胺树脂基体在室温下，贮存时间对粘度以及对固化过程中加压点的影响，给出了相应的计算方法。     

Phased array of large reflectors for deep-space communication

In this paper the problem of uplink array calibration for deep-space communication is considered. A phased array of many modest-size reflectors antennas is used to drastically improve the uplink effective isotropic radiated power of a ground station. A radar calibration procedure for the array phase distribution is presented using a number of in-orbit targets. Design of optimal orbit and the number of calibration targets is investigated for providing frequent calibration opportunities needed for compensating array elements phase center movements as the array tracks a spacecraft. Array far-field focusing based on the near-filed in-orbit (low Earth orbit (LEO)) calibration targets is also presented and array gain degradation analysis based on the position error of the array elements and in-orbit targets has been carried out. It is shown that errors in the in-orbit targets positions significantly degrade the far-field array gain while the errors in array elements positions are not very important. Analysis of phase errors caused by thermal noise, system instability, and atmospheric effects show insignificant array gain degradation by these factors     

The Pre-CME Sun

The coronal mass ejection (CME) phenomenon occurs in closed magnetic field regions on the Sun such as active regions, filament regions, transequatorial interconnection regions, and complexes involving a combination of these. This chapter describes the current knowledge on these closed field structures and how they lead to CMEs. After describing the specific magnetic structures observed in the CME source region, we compare the substructures of CMEs to what is observed before eruption. Evolution of the closed magnetic structures in response to various photospheric motions over different time scales (convection, differential rotation, meridional circulation) somehow leads to the eruption. We describe this pre-eruption evolution and attempt to link them to the observed features of CMEs. Small-scale energetic signatures in the form of electron acceleration (signified by nonthermal radio bursts at metric wavelengths) and plasma heating (observed as compact soft X-ray brightening) may be indicative of impending CMEs. We survey these pre-eruptive energy releases using observations taken before and during the eruption of several CMEs. Finally, we discuss how the observations can be converted into useful inputs to numerical models that can describe the CME initiation.     

基于Riccati方程的离散容错控制系统设计

基于离散系统的Ｒｉｃｃａｔｉ方程，提出一种对传感器失效具有完整性的离散控制系统的设计方法，给出了完整性设计方法的设计步骤，并用设计实例验证了该方法的有效性．该方法还可推广用于执行器失效的情况．     

基于客户／服务器体系的工程数据库管理系统

提出了一种基于客户／服务器结构的工程数据库管理系统。客户／服务器结构的总体思想是将所有共享数据放在共享的服务器数据库上，所有客户的临时数据放在客户方由客户独占，客户通过局域网（ＬＡＮ）向服务器申请所要的数据，服务器通过ＣｈｅｃｋＩｎ和ＣｈｅｃｋＯｕｔ机制向客户提供数据服务，并确保数据的一致性和完整性。文章讨论了如何在客户和服务器之间合理分配负荷，描述了客户／服务器体系的多级存贮结构和客户与服务器之间的数据通信．重点探讨了客户／服务器结构下的缓冲管理问题。系统的开发环境是ＳｕｎＯＳ，ＴＣＰ／ＩＰ协议，系统用Ｃ语言开发。     

翼型动失速和非定常载荷的综合翼型数据方法

本文给出受迫谐振翼型的动失速工程估算方法。本方法基于凤洞试验，综合分析翼型动、稳态特性之间的差别与动、稳态条件之间的关系，建立一套估算动、稳态特性之间差别的经验公式，修正稳态特性，得到相应的动态特性。用本方法计算了三种翼型不同动态条件（包括深失速和后掠）的动失速特性，并与测量和文献结果进行了比较，结果符合得相当好。     

环氧／聚氨酯涂料的研究

采用环氧树脂来固化聚氨酯涂料，可使涂层具有良好的刚性和耐蚀性，本文研究了涂料各组分对于涂料涂层性能的影响，拟定了最佳配方工艺，并对其机理进行了阐述。     

TP86A单板机连接ADA-1612转换板的接口

ADA-1612转换板是12位的模入模出板。它可以直接用于具有S-100总线接口的单板机系统。本文简单分析了ADA-1612转换板的结构原理,详细内容参见文[2]。TP86A采用INTEL 8086CPU的十六位单板机。本文为它设计了连接ADA-1612转换板的S-100总线接口。并介绍了该接口电路和使用该接口的编程方法。现在,该接口已经实际应用到几种TP86A组成的系统。     

铝合金薄板焊接热裂敏感性探索

探讨了用钨极氩弧焊焊接铝合金ＬＹ１２ＣＺ及ＬＹ１２Ｍ薄板时其热裂纹的变化规律，并分析了焊接工艺参数及填充材料对热裂纹的影响。试验结果表明，选择合适的工艺参数和填充材料可以明显提高该类合金的抗裂性能。     

三维CT图象自动分割法

计算机断层扫描图象（ＣＴ）和核磁共振图象（ＭＲＩ）是诊断疾病和制定治疗方案与手术方案的主要依据之一，而分割ＣＴ和ＭＲＩ图象是定量分析其平面与三维信息的关键之一。本文先采用三维自适应滤波，在保留图象细节的前提下滤除高斯分布噪声和脉冲噪声，然后根据ＣＴ或ＭＲＩ各断层多阈值二值化图象采用区域自动增长算法实现了三维ＣＴ图象和ＭＲＩ图象的自动分割。最后给出了腹部ＣＴ图象的分割结果，该方法分割精度高，速度快，具有广泛的临床应用价值