基于局部Neymark分解的混沌信号与噪声的分离方法

从动力系统和几何的观点出发,提出了基于局部Ｎｅｙｍａｒｋ分解的混沌信号与噪声的分离方法。该方法在一个局部的轨道空间内进行Ｎｅｙｍａｒｋ分解,重构时消除由噪声引起的在某些方向上的错误分量,接着进行反嵌入,使得这一由于噪声影响而发生畸变的局部轨道得以纠正,达到混沌信号与噪声分离（以下简称混沌滤波）的目的,并对其中的反嵌入问题作了较为深入的讨论,仿真实验表明了本方法的有效性。     

Aerodynamic Performance and Aeroacoustic Characteristics of Model Rotor with Anhedral Blade Tip in Hover

Experimental investigation on the aerodynamic performance and aeroacoustic characteristics of model rotors with different tip anhedral angles in hover are conducted in the paper.Three sets of model rotors with blade-tip anhedral angle 0°(reference rotor),20°and 45°respectively are designed to analyze the influence of the anhedral angle on the hovering performance and aeroacoustics of rotor.In the environment of anechoic chamber,the hover experiments under the different collective pitch and blade numbers,are carried out to measure the figure of merit(FM),time history of sound pressure and sound pressure level(SPL)of the three rotor models.Based on test results,the comparison and analysis of hovering performance and aeroacoustic characteristics among the three rotor models have been done.Meanwhile,for the sake of analysis,the rotor wake and blade pressure distribution are simulated by means of computational fluid method(CFD).At last,some conclusions about the effects of blade-tip anhedral angle on the aerodynamic performance and aeroacoustic characteristics in hover are obtained.An anhedral blade tip can enhance the FM of the rotor,and decrease the rotor loads noise to some extent.     

大型空间模拟器总体检漏技术

论述了大型空间环境模拟器的总体检漏技术,针对大型模拟器的特点,从设计、加工到安装调试等过程介绍了检漏方法的选择,并着重介绍了氦质谱检漏法可检灵敏度的分析,对大型模拟器的检漏方案进行了全过程的设计.     

天线分析仪控制系统的研制

介绍了天线分析仪控制系统研制过程中的硬件设计关键技术,并提出了轴角转换器控制卡的设计方案,实验表明该方案具有一定的实用性与通用性。     

Reliability-based trajectory optimization using nonintrusive polynomial chaos for Mars entry mission

This paper presents the reliability-based sequential optimization (RBSO) method to settle the trajectory optimization problem with parametric uncertainties in entry dynamics for Mars entry mission. First, the deterministic entry trajectory optimization model is reviewed, and then the reliability-based optimization model is formulated. In addition, the modified sequential optimization method, in which the nonintrusive polynomial chaos expansion (PCE) method and the most probable point (MPP) searching method are employed, is proposed to solve the reliability-based optimization problem efficiently. The nonintrusive PCE method contributes to the transformation between the stochastic optimization (SO) and the deterministic optimization (DO) and to the approximation of trajectory solution efficiently. The MPP method, which is used for assessing the reliability of constraints satisfaction only up to the necessary level, is employed to further improve the computational efficiency. The cycle including SO, reliability assessment and constraints update is repeated in the RBSO until the reliability requirements of constraints satisfaction are satisfied. Finally, the RBSO is compared with the traditional DO and the traditional sequential optimization based on Monte Carlo (MC) simulation in a specific Mars entry mission to demonstrate the effectiveness and the efficiency of the proposed method.     

火箭发动机基于神经网络非线性辨识的故障检测

应用神经网络方法，提出了一种液体火箭发动机故障实时检测算法。神经网络采用非线性辨识技术贴近发动机的工作过程，并输出包合发动机故障信息的辨识误差信号。若辨识误差变大超过一定阈值，检测逻辑就预报发动机故障。在发动机启动阶段离线训练神经网络，在发动机稳态过程可以采用离线或在线学习算法。实验研究表明神经网络可以成功地应用于大型泵压式液体火箭发动机的故障检测。     

Unification and comparison between two concepts of radar targetangular glint

This paper provides a general proof of unification between two concepts of radar target angular glint. The analysis of a two-point target model, consisting of an electrically and magnetically ideal dipole, shows the relation, difference, and equivalent condition between them more clearly. Angular glint has been synthesized from the measured data of radar echo phase, and compared with the theoretical result     

Vision-based bio-inspired guidance law for small aerial vehicle

During predation, a flying insect can form a stealth flight path. This behavior is called motion camouflage. Based on the study results of this behavior, the perception and neurology of flying insects, a novel bio-inspired guidance law is proposed for the terminal guidance for small aerial vehicle with charge-coupled device imaging seekers. The kinematics relationship between a small aerial vehicle and target is analyzed, and a two-dimensional guidance law model is established by using artificial neural networks. To compare with the proportional guidance law, the numerical simulations are carried out in the vertical plane and in the horizontal plane respectively. The simulation results show that the ballistic of the small aerial vehicle is straighter and the normal acceleration is smaller by using the bio-inspired guidance law than by using the proportional guidance law. That is to say, the bio-inspired guidance law just uses the information of the target from the imaging seeker,but the performance of it can be better than that of the proportional guidance law.     

环氧／聚氨酯涂料的研究

采用环氧树脂来固化聚氨酯涂料，可使涂层具有良好的刚性和耐蚀性，本文研究了涂料各组分对于涂料涂层性能的影响，拟定了最佳配方工艺，并对其机理进行了阐述。     

用神经网络法编程加工轮毂上特殊曲面的探讨

根据轮毂上曲面的特殊性,提出了采用神经网络方法进行编程,实现数控加工,以取代传统的加工方法的设想。