Application of a discrete-continuous model of strength analysis to solve the identification problem of a thermally loaded structure

This paper proposes to solve the problem of determining the strength properties of materials for thin-walled structural elements under mechanical and thermal loading as an optimization problem. A mathematical statement of the problem under certain assumptions is given.     

能量和协方差检验的联合频谱感知算法研究

快速准确的频谱感知是认知无线电系统有效通信的前提。现有的能量检测算法易受噪声波动影响,为提高频谱感知的性能,采用了联合频谱感知算法。方法利用双门限的能量检测法进行粗检,并使用协方差检测算法对中间混淆区域进行二次判决。在噪声不确定的情况下,对联合频谱感知算法性能进行了仿真分析。仿真结果表明,在噪声波动较大时,算法有效地提高频谱检测的性能,而且计算复杂度得到降低,并优于能量检测法和协方差检测法。     

Variable stiffness design of redundantly actuated planar rotational parallel mechanisms

Redundantly actuated planar rotational parallel mechanisms (RAPRPMs) adapt to the requirements of robots under different working conditions by changing the antagonistic internal force to tune their stiffness. The geometrical parameters of the mechanism impact the performances of modulating stiffness. Analytical expressions relating stiffness and geometrical parameters of the mechanism were formulated to obtain the necessary conditions of variable stiffness. A novel method of variable stiffness design was presented to optimize the geometrical parameters of the mechanism. The stiffness variation with the internal force was maximized. The dynamic change of stiffness with the dynamic location of the mechanism was minimized, and the robustness of stiff-ness during the motion of the mechanism was ensured. This new approach to variable stiffness design can enable off-line planning of the internal force to avoid the difficulties of on-line control of the internal force.     

小展弦比飞翼亚、跨、超声速支撑干扰研究

通过数值模拟方法研究了小展弦比飞翼标模在0.6、0.9、1.5三个典型马赫数下的支撑干扰特性,分别考虑了近场尾部外形局部畸变和尾支杆干扰及远场风洞中部支架干扰,并基于表面压力系数差异为准则尝试对近场干扰量进行分解。研究得到如下结论:马赫数0.6时,远场支撑阻力系数和俯仰力矩系数的干扰量约占总支撑干扰量的30%,升力系数约占20%;马赫数0.9、迎角2°时,阻力系数远场支撑干扰量占总支撑干扰量的40%,迎角18°时,远场支撑干扰使得涡破裂位置提前;马赫数1.5时,远场支撑干扰可以忽略;基于表面压力系数差异将支撑干扰量分解的方法在亚声速支撑干扰前传明显时不适用,在马赫数0.9、迎角2°时求得近场支撑干扰使得马赫数减小约0.02,迎角减小约0.1°,马赫数1.5时用此法求得马赫数和迎角的干扰量均约等于0。     

轴压开口圆柱薄壳屈曲分析与试验

开口圆柱薄壳结构的轴向承载能力和稳定性分析是空间薄壁管式伸展机构(STEM,Storable Tubular Extendable Member)设计的关键问题之一.基于特征值屈曲分析方法,研究了轴压铍青铜开口圆柱薄壳结构在两端固支条件下的屈曲载荷与设计参数间的关系,利用幂函数拟合的方法建立了一种轴压开口圆柱薄壳屈曲载荷模型.通过铍青铜开口圆柱薄壳轴向压缩试验对特征值屈曲分析和所建立的轴压开口圆柱薄壳屈曲载荷模型进行了验证.结果表明:特征值屈曲分析方法可用于各向同性材料开口圆柱薄壳结构在两端固支条件下的轴向承载能力与稳定性分析;使用轴压开口圆柱薄壳屈曲载荷模型计算各向同性材料的开口圆柱薄壳在两端固支条件下受轴压作用时的屈曲载荷,最大误差为21%.     

Reliability analysis of aero-engine blades considering nonlinear strength degeneration

To comprehensively consider the effects of strength degeneration and failure correlation, an improved stress-strength interference (SSI) model is proposed to analyze the reliability of aeroengine blades with the fatigue failure mode. Two types of TC4 alloy experiments are conducted for the study on the damage accumulation law. All the parameters in the nonlinear damage model are obtained by the tension-compression fatigue tests, and the accuracy of the nonlinear damage model is verified by the damage tests. The strength degeneration model is put forward on the basis of the Chaboche nonlinear damage theory and the Griffith fracture criterion, and determined by measuring the fatigue toughness during the tests. From the comparison of two kinds of degeneration models based on the Miner’s linear law and the nonlinear damage model respectively, the nonlinear model has a significant advantage on prediction accuracy especially in the later period of life. A time-dependent SSI reliability model is established. By computing the stress distribution using the finite element (FE) technique, the reliability of a single blade during the whole service life is obtained. Considering the failure correlation of components, a modified reliability model of aero-engine blades with common cause failure (CCF) is presented. It shows a closer and more reasonable process with the actual working condition. The improved reliability model is illustrated to be applied to aero-engine blades well, and the approach purposed in this paper is suitable for any actual machinery component of aero-engine rotor systems.     

航天器分裂体或抛射物的轨道形成和演化

由卫星和碎片爆炸或相互间碰撞所产生的分裂体,或由在轨航天器向外抛射所产生的抛射物,对空间环境的影响正日益增大。对它们轨道形成和演化的研究可以为分析空间解体事件提供一种有效方法。本文利用Kep-ler运动积分以及受摄二体问题的分析解,建立了分裂体或抛射物的轨道形成及其演化与分裂或抛射速度之间的关系,从而为理解以各个方向、不同大小的速度分裂或抛射的物体的轨道演化特征提供理论依据。文章最后通过数值验证表明了该方法的有效性。     

我国航空运输需求价格弹性测算

根据经济学理论,同时结合我国航空运输的特点,通过引入我国GDP和我国航空运输每运输吨公里收入两个变量,利用线性回归分析的方法建立了我国航空运输需求函数,并根据需求函数绘制了我国航空运输需求曲线,然后根据需求函数和需求曲线测算了我国航空运输需求价格弹性值。最后,对本研究需要改进的方面进行了分析和总结。     

三轴台中框轴系静态设计与装调(下)

４内、中框轴线垂直度的调整一般来说，内中框轴相互垂直度的精度主要取决于中框架安装内框轴承的上下两孔的轴线与中框轴安装端面的平行度、与上、下孔、左、右止口的同轴度，即取决于中框架的加工精度，对于高精度的要求（１″），受加工机床精度的局限，不能满足精度要...     

新型行波光调制器单脊波导的微波电路研究

设计了一种采用单脊波导作为微波电路的新型行波光调制器。分析计算了脊缝间距小于１．００ｍｍ的脊波导中的电场分布、截止波长、频带宽度和特性阻抗；设计了与矩形波导联接的过渡段。结果表明：采用单脊波导作为光调器将使微波电场得到充分的利用，将提高调制效率；使波导单模工作频带增宽；具有较低的特性阻抗；通过过渡段易与矩形波导联接及保证单模传输。最后，经论证选择了切实可行的脊波导各几何参数ａ＝１３．００ｍｍ，ｂ＝１０．１６ｍｍ，ｄ＝０．５０ｍｍ，ｓ＝１．００ｍｍ。