Fatigue crack propagation of new aluminum lithium alloy bonded with titanium alloy strap

A new type of aluminum lithium alloy (Al-Li alloy) Al-Li-S-4 was investigated by test in this paper. Alloy plate of 400 mm · 140 mm · 6 mm with single edge notch was made into samples bonded with Ti-6Al-4V alloy (Ti alloy) strap by FM 94 film adhesive after the surface was treated. Fatigue crack growth of samples was investigated under cyclic loading with stress ratio (R) of 0.1 and load amplitude constant. The results show that Al-Li alloy plate bonded with Ti alloy strap could retard fatigue crack propagation. Retardation effect is related with width and thickness of strap. Flaws have an observable effect on crack propagation direction.     

Radio fine structures in dm–cm wavelength range associated with magnetic reconnection processes

Radio bursts with fine structures in decimetric–centimetric wave range are generally believed to manifest the primary energy release process during flare/CME events. By spectropolarimeters in 1–2 GHz, 2.6–3.8 GHz, and 5.2–7.6 GHz at NAOC/Huairou with very high temporal (1.25–8 ms) and spectral (4–20 MHz) resolutions, the zebra patterns, spikes, and new types of radio fine structures with mixed frequency drift features are observed during several significant flare/CME events. In this paper we will discuss the occurrence of radio fine structures during the impulsive phase of flares and/or CME initiations, which may be connected to the magnetic reconnection processes.     

小不对称物体配平性能风洞实验研究

用阶跃响应法,在风洞中测量小不对称物体配平性能的实验原理、实验装置、数据处理及部分实验结果。 模型支承于空气静压轴承。在模型内部设有电磁机构,在一次吹风中,可以阶跃方式多次提供不对称量。由高精度、非接触的感应同步器数字测量模型俯仰角变化历程。用修正Newton-Raphson法处理数据,求出小不对称量引起的配平角δ_o、俯仰力矩C_mo和气动刚度C_ma、气动阻尼C_mq等参数。 对11°斜切锥,钝度比分别为0.06及0.16的模型进行了风洞实验。实验M数为33.5和4。实验结果表明,所采用的实验原理、设备及方法可提供较好的精度及分辨率。实验还求出了配平性能(δ_o,C_mo)以及C_ma,C_mq随M数的变化。     

冲压工艺中的少无废料冲裁技术

叙述了冲压生产过程中运用“和合几何”理论，通过优化冲压件技术设计、补合、大小零件套裁、合理利用板材公差以及应用计算机辅助技术，实现少无废料冲裁     

专用瞄准设备自动检定系统

介绍了专用瞄准设备自动检定系统的系统配置、工作原理及软件设计，并对系统的测量不确定度进行了分析和评定。     

Airborne adaptive MTI scheme with preventing the whitening of thetarget

A new airborne MTI scheme that applies to non-homogeneous clutter environment is presented. Results of simulation have proved that the scheme has a superior ground clutter suppression performance and can effectively prevent the whitening of a target     

中国核电厂操作员反应时认知模型的应用(英文)

讨论了一些有关人员行为与时间有依赖关系的可靠性模型；给出了中国核电厂操作员在清华大学培训模型机上的一些可靠性实验结果。此外，还根据已获得的实验数据计算了在ＡＴＷＳ事故条件下人的失误概率。     

System of simulation training for unmanned aircraft

For proficiently operating an unmanned aircraft, the aircrew must be thoroughly trained. However, using practical equipment to train the aircrew is work of high cost and risk. In this paper, a system of simulation training for unmanned aircraft is introduced. Its function and composition are explained in detail. In practice, the system not only decreases training cost and risk, but also strengthens training effectiveness and diversity     

提高机载电子产品的可靠性——某告警系统的故障分析

介绍电子产品设计时元器件选用对系统可靠性的影响。结合实际案例,总结并强调在电子产品设计时的元器件选用应从质量等级入手,充分进行降额设计和热设计。阐明合理选用元器件是实现电子产品系统设计高可靠性水平的基础。     

飞机加装组合导航系统方案

论述了飞机加装组合导航系统的技术性能及系统配置的情况。