金属弹簧管性能影响因素的仿真分析

为了研究高温密封组件金属弹簧性能,本文通过对波音公司编网状弹簧管结构和Streck心脏支架结构的研究,建立了编织弹簧的几何拓扑构型和数学模型,推导了弹簧直径计算公式。采用AUTODESK3D-MAX构建了编织弹簧的仿真模型,用ANSYS仿真软件分别从编织丝直径、编织密度以及编织方法 3方面探究不同测试对弹簧性能的影响。结果表明,增加弹簧丝直径、降低弹簧管轴向方向的编织密度、提高圆周方向的编织密度、向外的弹簧管编织方式可有效提高弹簧管的回弹性能。     

一种基于粗糙K-均值的椭球基函数神经网络

改进了一种椭球基函数神经网络,它与经典椭球单元神经网络的结构不同,而与径向基函数神经网络结构类似,即它有一个隐含层,并且隐层单元采用椭球基函数,区别于RBF网络的高斯函数。本文采用粗糙K-均值方法求取椭球函数的中心,并给出了该方法中确定初始阈值的步骤。这种改进方法不但使对输入空间的划分局部作用,而且划分区域封闭有界。因此,改进的神经网络具有较好的函数逼近能力和模式识别能力。仿真实验验证了该椭球基函数神经网络的正确性和有效性。     

圆锥形薄壁壳体的弹性稳定性

基于Donnell型扁壳理论,利用法分析了在均布外压作用下圆锥形薄壁壳体的弹性稳定性问题。根据外压实验观察结果和通过选取适当的位移分量表达式,文中给出了临界外压的近似表达式。数值结果表明,本文理论分析预示值与临界载荷的实验值很吻合。文中还对有关参数对临界载荷的影响进行了讨论。本文所得结果可供工程应用参考。     

型号研制中参考HB7386卡箍标准制定企标的实践

在分析各尺寸要求的基础上,指出了HB7386《600℃高温高压管路连接快卸卡箍》不能满足型号研制需求的原因;介绍了参考该标准制定企业标准的方法。     

平面激波绕30°出峰后的绕射与反射

本文针对一平面激波S绕过坡角为30°的山峰后与地面作用所产生的波系图案等问题,通过激波管光测模型实验手段进行了分析和研究。实验是在入射激波马赫数Μ_i=1.18,1.32,1.74,2.00和2.29等五种条件下进行的。实验结果表明,在入射激波S和反射激波R之间出现了一接触面C,并与Skews关于平面激波绕凸角壁面时所得到的结果做了比较。与此同时,从我们所拍摄的纹影流场照片上可以看出,平面激波S绕过30°山峰后与地面作用所产生的反射波均属于马赫反射的范围。     

Neutral buoyancy and sleep-deprived serum factors alter expression of cytokines regulating osteogenesis

We examined expression of genes associated with cytokine production, and genes implicated in regulating bone metabolism, in bone stromal and osteoblast cells incubated under standard ground conditions and under conditions of neutral buoyancy, and in the presence/absence of serum from normal or sleep-deprived mice. We observed a clear interaction between these two conditions (exposure to neutral buoyancy and serum stimulation) in promoting enhanced osteoclastogenesis. Both conditions independently altered expression of a number of cytokines implicated in the regulation of bone metabolism. However, using stromal cells from IL-1 and TNFx cytokine(r) KO mice, we concluded that the increased bone loss under microgravity conditions was not primarily cytokine mediated.     

超声速燃烧实验研究(Ⅱ)

用电弧加热空气,对带有突扩台阶后扩张形,入口M_a=2.1和3.0的超声速燃烧室进行了实验研究,并对两种不同燃烧室长度、煤油和氢气在垂直和平行喷射下的燃烧状况作了比较。     

Study of ionospheric D region changes during solar flares using MF radar measurements

During solar flares, the X-ray radiation suddenly increases, resulting in an increase in the electron density of the atmospheric D region and a strong absorption of short-wave radio waves. Based on Langfang medium frequency (MF) radar, this paper analyzed the variation characteristics of D region in the lower ionosphere from 62 km to 82 km. The analysis focused on multiple C-level and M-level solar flare events before and after the large-scale flare event at 11:53 (UT) on September 6, 2017. The results show that it is difficult to detect the electron density over 70 km in Langfang during solar flares, but the electron density value can be obtained as low as 62 km, and the stronger the flare intensity, the lower the detectable electron density height. Besides, the equal electron density height, the received power of X and O waves will also be significantly reduced during the flares, and the reduction of equal electron density height has a weak linear relationship with flare intensity.     

Analysis of the dynamic behavior of structures using the high-rate GNSS-PPP method combined with a wavelet-neural model: Numerical simulation and experimental tests

Recently, the high rate global navigation satellite system-precise point positioning (GNSS-PPP) technique has been used to detect the dynamic behavior of structures. This study aimed to increase the accuracy of the extraction oscillation properties of structural movements based on the high-rate (10?Hz) GNSS-PPP monitoring technique. A developmental model based on the combination of wavelet package transformation (WPT) de-noising and neural network prediction (NN) was proposed to improve the dynamic behavior of structures for GNSS-PPP method. A complicated numerical simulation involving highly noisy data and 13 experimental cases with different loads were utilized to confirm the efficiency of the proposed model design and the monitoring technique in detecting the dynamic behavior of structures. The results revealed that, when combined with the proposed model, GNSS-PPP method can be used to accurately detect the dynamic behavior of engineering structures as an alternative to relative GNSS method.     

重型燃气轮机高雷诺数CDA叶型转捩特性数值计算

为研究重型燃气轮机的压气机叶片在高雷诺数工况下的气动性能,基于Gamma-Theta转捩模型的雷诺时均方程对某可 控扩散叶型进行了数值计算。通过对比不控制马赫数与控制马赫数,分析高雷诺数对可控扩散叶型气动性能及转捩特性的影响。 结果表明：在不控制马赫数条件下,在零攻角时,雷诺数从7×10 5 增大为9×10 5 ,总压损失增加了约391.95%;在高雷诺数工况下随 着雷诺数的增大,叶片流动损失不断增大,叶片可用攻角范围减小,同时在叶片吸力面出现激波,干扰转捩的产生。在控制马赫数 条件下,当Ma=0.6时,在零攻角工况下,雷诺数从8.2×10 5 增大为1×10 7 ,总压损失减小了约38.98%,吸力面转捩起始点从4.78%弦 长处前移至1.11%弦长处;在高雷诺数工况下,叶片流动损失随着雷诺数的增大不断减小,吸力面转捩位置前移。