Single track and single layer formation in selective laser melting of niobium solid solution alloy

Selective laser melting (SLM) was employed to fabricate Nb-37Ti-13Cr-2Al-1Si (at%) alloy, using pre-alloyed powders prepared by plasma rotating electrode processing (PREP). A series of single tracks and single layers under different processing parameters was manufactured to evaluate the processing feasibility by SLM, including laser power, scanning speed, and hatch distance. Results showed that continuous single tracks could be fabricated using proper laser powers and scanning velocities. Both the width of a single track and its penetration depth into a substrate increased with an increase of the linear laser beam energy density (LED), i.e., an increase of the laser power and a decrease of the scanning speed. Nb, Ti, Si, Cr, and Al elements distributed heterogeneously over the melt pool in the form of swirl-like patterns. An excess of the hatch distance was not able to interconnect neighboring tracks. Under improper processing parameters, a balling phenomenon occurred, but could be eliminated with an increased LED. This work testified the SLM-processing feasibility of Nb-based alloy and promoted the application of SLM to the manufacture of niobium-based alloys.     

推力室逆置点火瞬时真空舱流场数值与试验研究

针对高空模拟舱内逆向布置的推力室点火瞬时过程中舱内压力的变化规律进行了理论和数值仿真分析,推力室高速气流的动能是推力室短程点火过程中舱内压力大幅上升的主要原因.为保证推力室点火时舱内的真空度,需要在推力室出口配置导流装置将燃气导出真空舱.对单台和4台并联推力室进行点火试验,试验表明：采用燃气导流能够较好保持舱内真空度,是整机多推力室高空模拟试验的新思路.     

降低PLC系统峰均比的低复杂度改进SLM算法

针对信道慢时变特性及噪声复杂的特点,提出了适用于低压电力线通信的降低峰均比的改进算法.改进算法对原始输入序列中的部分数据进行循环移位来获得一系列不同的新数据序列;在每个新数据序列尾部插入相应的边带信息组成一个输入候选序列;对这一系列不同的输入候选序列分别实施傅里叶反变换,得到不同的输出序列;从中选择峰均比最小的用于传输,达到降低系统峰均比的目的.结果表明:改进算法能够有效地降低系统的峰均比,并且能够获得更好的误码率性能,同时具有比传统选择性映射方法更低的计算复杂度.     

基于SPM的航空转包生产能力研究

针对国际航空转包对航空制造企业生产能力的要求,分析了航空转包能力的评价构成要素,基于供应商绩效测量标准体系SPM建立了转包能力的模型和转包能力的三维体系结构,并通过三维能力模型的能力分区分层评价对航空企业的转包能力进行分析。该模型及方法能对企业转包能力进行全面评价,发现企业转包生产的能力优势和能力薄弱环节,为企业提高转包能力指明了纠正和完善的方向。     

轴编C/C复合材料组分材料有效性能

利用光学显微镜观测和测量轴编C/C复合材料细观编织结构及其尺寸,建立轴编C/C复合材料有限元模型,通过给出组分材料有效性能的变化区间,构造组分材料性能与轴编C/C复合材料宏观有效性能的对应关系,利用径向基函数(RBF)人工神经网络(ANN)方法,对该高度非线性的对应关系进行训练,通过轴编C/C复合材料宏观实验结果,预报其组分材料的有效性能。结果表明,轴编C/C复合材料面内弹性性能基本相同,在测量时可忽略面内纤维束铺设方向的影响;人工神经网络对训练样本有一定的依赖性,但通过多次随机构造样本训练网络,可得到理想的预测结果,且人工神经网络方法具有很好的容错性,能很好地预报轴编C/C复合材料组分材料的有效性能。     

Evaluation of multiple radar target trackers in stressfulenvironments

This paper evaluates the performance of multiple target tracking (MTT) algorithms in real-life stressful radar tracking environments. Real closely spaced maneuver radar data, generated by six F-18 fighters and other targets, were collected jointly by the defence departments of Canada and United States to support this practical MTT algorithm evaluation study. A set of performance metrics was defined here to compare the suboptimal nearest neighbor (SNN), global nearest neighbor (GNN), and various variants of the joint probabilistic data association (JPDA) MTT trackers. Results reveal an interesting result that all these MTT algorithms exhibited very close performance. In addition, the weighted sum approach of the PDA/JPDA trackers which are theoretically effective were observed to perform poorly in tracking closely spaced targets. Overall speaking, the GNN filter based on the Munkres algorithm had the best performance in terms of both tracking performance and robustness     

X-ray induced alterations in the differentiation and mineralization potential of murine preosteoblastic cells

To evaluate the effects of ionizing radiation (IR) on murine preosteoblastic cell differentiation, we directed OCT-1 cells to the osteoblastic lineage by treatment with a combination of β-glycerophosphate (β-GP), ascorbic acid (AA), and dexamethasone (Dex). In vitro mineralization was evaluated based on histochemical staining and quantification of the hydroxyapatite content of the extracellular bone matrix. Expression of mRNA encoding Runx2, transforming growth factor β1 (TGF-β1), osteocalcin (OCN), and p21^CDKN1A was analyzed. Exposure to IR reduced the growth rate and diminished cell survival of OCT-1 cells under standard conditions. Notably, calcium content analysis revealed that deposition of mineralized matrix increased significantly under osteogenic conditions after X-ray exposure in a time-dependent manner. In this study, higher radiation doses exert significant overall effects on TGF-β1, OCN, and p21^CDKN1A gene expression, suggesting that gene expression following X-ray treatment is affected in a dose-dependent manner. Additionally, we verified that Runx2 was suppressed within 24 h after irradiation at 2 and 4 Gy. Although further studies are required to verify the molecular mechanism, our observations strongly suggest that treatment with IR markedly alters the differentiation and mineralization process of preosteoblastic cells.     

基于S1000D的设备级IETM研制方案

介绍了IETM的特点,阐述了S1000D标准的核心概念、基本思想及基于S1000D的IETM典型研制流程。以某型装备IETM研制为例,给出了系统级IETM研制流程,包括基础环境研制、系统级研制、设备级研制。着眼于设备级研制,提出了制约研制进度和质量的主要问题,包括编制方式问题和内容完整性问题。针对编制方式问题,提出了基于S1000D的设备级IETM研制方案。     

高校体育多媒体教学平台系统的建设研究

本文从当前高校体育教学的周期短、学时少、教学方法单一的特点出发,充分的利用现代计算机网路多媒体技术,设计一套符合高校体育教育的多媒体教学平台系统,以满足学生课余时间的自主学习,增加教学的延伸性、娱乐性,为高校体育教育目标的实现提供保障。     

Training effectiveness evaluation of helicopter emergency relief based on virtual simulation

Helicopters are playing an increasingly important part in emergency relief, such as earthquake rescue, firefighting and medical transport. With the development of virtual simulation technology, virtual simulation-based training is widely used in the training of the helicopter crew especially for the dangerous and costly missions mentioned above. A complete training effectiveness evaluation method is proposed to evaluate the trainees’ training effect based on virtual simulation in this paper. A key to this method is regarding the complicated process as a discrete event-activity flow system and establishing the evaluation indicator system. Then expert group and Analytical Network Process (ANP) are applied to determine the weight of indicators. When the training data are processed, there is a novel attempt to apply Fuzzy Comprehensive Evaluation (FCE) model to calculate the two categories of indicators. Eventually, an experiment and the analysis were carried out to validate the evaluation method.