抑制恒压变量柱塞泵压力低频振荡方法的研究

为解决恒压变量柱塞泵出口压力出现低频振动的问题,阐述了恒压变量机构的原理,从理论上分析了影响出口压力的因素,并指出产生振荡的原因,提出在泵装配过程中,采用工艺关键要点控制的方法可抑制压力低频振荡。试验表明,该方法有效地减小了泵出口压力的低频振荡,使产品装调合格率大大提高。     

基于随机粒子追踪方法的环形燃烧室点火动态模拟

为了深入研究低排放燃烧室点火联焰规律,在全新的环形模型燃烧室中开展了点火模拟和试验研究。点火模拟采用随机粒子追踪方法,能够基于时均冷态流场的仿真结果快速模拟火焰传播过程。环形燃烧室包含16个中心分级旋流器,仅向预燃级通入丙烷,用于模拟航空发动机低排放燃烧室点火状态下的空气燃油分级。试验采用PIV技术测量3个头部区域流场,利用高速相机拍摄火焰CH*/C2*基团化学发光信号。对多个流量和当量比条件下的联焰过程、联焰时间和传焰速率进行了分析,试验和模拟的结果均表明：环形燃烧室内火焰双向传播,燃烧室内外环流速度差异导致了双向火焰传播速度差,传焰速率随燃烧室湍流速度和当量比的增加而增加。点火模型很好地捕捉了环形燃烧室点火动态,所得传焰速率也符合湍流火焰传播规律,表明该模型具有较强预测能力。     

A high-performance ground-based prototype of horn-type sequential vegetable production facility for life support system in space

Vegetable cultivation plays a crucial role in dietary supplements and psychosocial benefits of the crew during manned space flight. Here we developed a ground-based prototype of horn-type sequential vegetable production facility, named Horn-type Producer (HTP), which was capable of simulating the microgravity effect and the continuous cultivation of leaf–vegetables on root modules. The growth chamber of the facility had a volume of 0.12 m³, characterized by a three-stage space expansion with plant growth. The planting surface of 0.154 m² was comprised of six ring-shaped root modules with a fibrous ion-exchange resin substrate. Root modules were fastened to a central porous tube supplying water, and moved forward with plant growth. The total illuminated crop area of 0.567 m² was provided by a combination of red and white light emitting diodes on the internal surfaces. In tests with a 24-h photoperiod, the productivity of the HTP at 0.3 kW for lettuce achieved 254.3 g eatable biomass per week. Long-term operation of the HTP did not alter vegetable nutrition composition to any great extent. Furthermore, the efficiency of the HTP, based on the Q-criterion, was 7 × 10⁻⁴ g² m⁻³ J⁻¹. These results show that the HTP exhibited high productivity, stable quality, and good efficiency in the process of planting lettuce, indicative of an interesting design for space vegetable production.     

拦截高速目标的比例与反比例导引捕获区分析

针对拦截高速目标的作战特点,分析了比例导引(PN)与反比例导引(RPN)的捕获区。首先,通过分析拦截弹与目标的相对运动关系,推导得到了顺轨和逆轨的零控拦截条件,此条件由目标和拦截弹的速度前置角以及二者速度比确定;其次,以拦截弹和目标速度前置角为坐标系,推导得到了PN以及RPN捕获区以及各自导航比设置范围。PN的捕获区由逆轨零控拦截条件以及与其相切且斜率为1/(N-1)的两条直线构成,RPN的捕获区由顺轨零控拦截条件以及与其相切且斜率为1/(-N-1)的两条直线构成;然后,利用函数对称性将PN与RPN捕获区转换到同一坐标区间,得到了相同条件下RPN捕获区要大于PN捕获区的结论;最后,开展了四种情形下的仿真,验证了本文捕获区分析的合理性及有效性。     

海洋定位卫星性能分析

编队卫星是重要的空间设施,为保证编队卫星在空间复杂环境中的工作效率,需对编队卫星的工作原理、状态进行分析。以三星编队的海洋定位卫星为例,由于该编队卫星工作状态常受到星间基线、目标源位置、卫星高度等多种因素的制约,易造成定位模糊等问题。在评价海洋定位卫星性能方面,传统的方法主要着眼于定位精度,而忽略了定位迭代解算时间这一指标,而在特定的场景下(海上搜救、抢险救灾),较短的解算时间可以迅速找出目标源的概略位置。通过分析海洋定位卫星的时差测量定位原理,对定位误差精度进行了分析,提出水平精度因子(HDOP)和最小二乘迭代结合的评价方法,分析了影响卫星性能的因素,包括目标源相对几何位置、卫星高度及卫星几何构型等方面的影响。仿真结果表明:本文的设计可以提高卫星的定位效果,为定位卫星的参数设定提供参考。     

酚醛树脂基纳米多孔材料的制备及结构调控

酚醛树脂基纳米多孔材料（Phenolic Resin-based Nanoporous Materials,PNM）是满足新一代航天飞行器轻质、高效隔热需求的新型热防护材料,传统制备方法中需使用超临界干燥技术,制备周期长、成本高。本研究通过两步法,即先合成线性酚醛树脂,再进行溶胶-凝胶的方法,实现了常压干燥PNM的制备。系统研究了固化剂含量、固化温度和固化时间对材料结构的影响和调控作用,分析了影响材料收缩率和热稳定性的因素。结果表明,PNM的微观纳米结构的变化会影响材料干燥后的收缩率,制备大颗粒、大孔径的微观结构更有利于降低材料的收缩率。而PNM的热稳定性主要受交联反应过程形成的化学结构的影响,通过优化固化剂的含量可提高PNM的热稳定性。当固化剂含量为10%,固化温度提高至150℃,固化时间延长至48 h的条件下,获得的PNM有最高的热稳定性（900℃下的残碳率为54.2%）、最发达的孔结构（比表面积为264.0 m²/g、孔容为2.67 cm³/g、平均孔径为40.0 nm）和最小的收缩率（0%）。此PNM制备方法简单、性能优异,在未来航天飞行器上有广阔的应用前景。     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

Conceptual design of a bioregenerative life support system containing crops and silkworms

This article summarizes a conceptual design of a bioregenerative life support system for permanent lunar base or planetary exploration. The system consists of seven compartments – higher plants cultivation, animal rearing, human habitation, water recovery, waste treatment, atmosphere management, and storages. Fifteen kinds of crops, such as wheat, rice, soybean, lettuce, and mulberry, were selected as main life support contributors to provide the crew with air, water, and vegetable food. Silkworms fed by crop leaves were designated to produce partial animal nutrition for the crew. Various physical-chemical and biological methods were combined to reclaim wastewater and solid waste. Condensate collected from atmosphere was recycled into potable water through granular activated carbon adsorption, iodine sterilization, and trace element supplementation. All grey water was also purified though multifiltration and ultraviolet sterilization. Plant residue, human excrement, silkworm feces, etc. were decomposed into inorganic substances which were finally absorbed by higher plants. Some meat, ingredients, as well as nitrogen fertilizer were prestored and resupplied periodically. Meanwhile, the same amount and chemical composition of organic waste was dumped to maintain the steady state of the system. A nutritional balanced diet was developed by means of the linear programming method. It could provide 2721 kcal of energy, 375.5 g of carbohydrate, 99.47 g of protein, and 91.19 g of fat per capita per day. Silkworm powder covered 12.54% of total animal protein intakes. The balance of material flows between compartments was described by the system of stoichiometric equations. Basic life support requirements for crews including oxygen, food, potable and hygiene water summed up to 29.68 kg per capita per day. The coefficient of system material closure reached 99.40%.     

高超声速武器是美军摆的迷魂阵吗?

发展高超声速武器是2010年的一个热点2010年,世界武器装备发展的一个热点是所谓的高超声速武器。高超声速飞行是指飞行器的飞行马赫数大于5的飞行。美国发展以超声速燃烧冲压发动机为核心的高超声速技术,自上世纪50年代末开始,已经50多年了。在这过程中,它的发展态势一直是时高时低,不大顺利。其困难之处,就在于超燃冲压发动机的工作,就像要在12级飓风中点燃一支蜡烛一样困难。2010年5月26日,美国空军研制的高超声速巡航导弹的验证飞行器X-51A进行了飞行试验。媒体的广泛报导,将     

航空永磁发电机的火灾保护

介绍一种应用于航空永磁发电机绕组短路保护的脱开机构，并为此脱开机构设计了测试电路，通过对脱开时间的测试，证明了这种脱开机构是有效的，最后对测试误差进行了分析。