基于稀疏阵列和码分信号的机载预警雷达STAP研究

基于稀疏阵列和码分正交信号,研究了机载雷达的空时自适应处理（STAP）技术,用于空中预警背景下的地面杂波抑制和运动目标探测。提出了稀疏阵列码分多相位中心孔径综合方法,采用正交编码信号实现多发多收,使综合后不同编码信号的相位中心在数量和分布情况上和满阵天线的相同,从而避免了稀疏阵列天线旁瓣较高的问题;在孔径综合的基础上,利用空时自适应处理方法完成杂波抑制,实现运动目标检测。仿真结果表明了本文方法的有效性。     

电磁脉冲作用下计算机死机故障研究

为研究核电磁脉冲对计算机系统的效应,利用核电磁脉冲源产生的模拟核电磁脉冲,对单片机系统进行了辐照效应实验。实验表明,单片机系统在核电磁脉冲作用下,可出现死机等多种故障现象。在实验的基础上,分析了死机产生的原因及加固方法,并通过实验验证了指令冗余、软件陷阱和看门狗等措施对防止单片机死机的有效性。     

基于CDMA蜂窝网的飞行器三维定位算法

针对中低空飞行器提出了一种将码分多址(CDMA)蜂窝网导频信号被动定位与惯性导航系统进行组合的导航定位方法。该定位方法是根据CDMA蜂窝网导频信号的到达时差（TDOA）进行两次加权最小二乘解算,并利用飞行器惯性组合的原始信息进行解模糊,从而实现中低空飞行器的三维实时定位。蒙特卡罗仿真证明：在高斯白噪声条件下,该算法运算速度快,精度高,其均方误差逼近克拉美罗下界（CRLB）,为组合导航实时性要求提供了理论参考。     

GPS基带信号源的数字模拟实现

首先对GPS信号产生原理进行了分析,然后给出了一种基带数字信号源的产生方法,即用码发生器产生伪随机码,先和导航数据进行调制,再调制上用DDS产生的载波信号,最终形成一颗或多颗GPS卫星信号.该方法用FPGA实现,不仅可以模拟GPS卫星信号的特性,而且考虑到调试接收机的动态捕获性能,信号源中还模拟了信号在运动状态下的情况.该方法为接收机基带信号处理部分的调试节省了大量的时间,针对基带部分提供信号源,减少了调试中其他因素(例如射频部分)的错误而带来的干扰.     

跳跃式跨大气层飞行弹道仿真分析

针对跳跃式跨大气层飞行弹道的特殊性,建立了其飞行动力学模型,在此基础上,对其弹道进行了仿真分析,得知乘波构型是跳跃式跨大气层飞行器理想气动布局,研究对比了跳跃弹道和惯性弹道的不同性能,结果表明跳跃飞行具有惯性飞行所无法比拟的突防能力。所得结论对跳跃式跨大气层飞行和未来新型武器装备的发展方向的研究具有一定的参考价值。     

液相炭化致密叠层针刺C/C材料的制备及性能

为了研究C/C材料快速致密的工艺,采用常压炭化和高压炭化联合致密的纯沥青液相炭化工艺,对叠层针刺C/C材料进行致密化处理,使预制体密度由 0.48 g/cm3增至 1.92 g/cm3,对该材料的力学及热学性能进行了测试,与整体毡C/C材料性能进行了对比,并利用扫描电子显微镜观察了材料的显微结构.结果表明,该材料具有较好的力学与热学性能,微观结构界面结合良好.     

高超声速钝锥模型及其尾迹红外辐射实验研究

介绍了利用InSb红外辐射计在弹道靶上测量底部直径为10mm、半锥角和头部半径分别为9°、2.2mm(模型A),8°、0.6mm(模型B)的两种非烧蚀钝锥模型及其尾迹的红外辐射.模型速度大于6km/s,飞行环境压力约4.8kPa,红外辐射测量波段为1~3μm、3~5μm.结果表明:非烧蚀钝锥模型头身部红外辐射远大于尾迹红外辐射,在相同飞行速度和环境压力条件下,模型A产生的红外辐射比模型B产生的红外辐射强.     

分布式资源安全监控系统模型的研究

为了提高分布式资源的安全性,针对通用操作系统不直接支持强制访问控制的问题,首先对强制访问控制模型进行了研究。在分析基于信息保密性的B e ll-L apadu la模型与基于信息完整性的B iba模型的基础上,提出了分布式资源安全监控系统(D istribu ted resource security m on itoring system,DRSM S)的模型和结构,提出了对分布式安全标签库进行修改的算法。详细介绍了文件资源安全监控系统的设计和关键技术,实现了基于DRSM S模型的资源安全监控原型系统。通过实验,验证了该模型可及时发现并阻断通过非法文件操作进行的入侵企图。实验结果表明:安全监控系统既可保护分布式资源的机密性,又可保护完整性。     

Guidepost-based autonomous orbit determination method for GEO satellite

Guidepost-based navigation system is a novel autonomous orbit determination method for the GEO satellite. The system is achieved by using the camera imaging function to obtain the guidepost images and the GNSS signal receiver to obtain the pseudoranges between the GEO and the navigation satellites. Due to the high altitude of GEO satellite and the time-varying sunlight condition in the space environment, it may be difficult to obtain object image points and the distance measurements of GNSS because of the weak visibility of the guideposts. To deal with the problem, a novel integrated orbit determination system is presented. The Earth landmarks, the in-orbit spacecraft and GNSS navigation satellites whose line-of-sights and the distance can be easily obtained are used at the same time as information for the GEO satellite navigation based on the observability conditions analysis. The observability of the GEO satellite navigation system is analyzed through the physical observability, the mathematical observability and the engineering observability through the observing geometry, the rank of observability matrix and the Cramer-Rao lower bound (CRLB) respectively. Besides, the maximum correntropy unscented Kalman filter (MCUKF) algorithm is applied to improve the estimation stability of the system in the presence of non-Gaussian noises. The simulation indicates the feasibility of the proposed scheme.     

Hypersonic vehicle aerodynamic design using modified sequential approximate optimization

Hypersonic vehicles are receiving increased attention within the aerospace community due to their high cruise speed and long-range capabilities. In this paper, a modified Sequential Approximate Optimization method is proposed for an optimized aerodynamic design of a hypersonic vehicle. As part of this approach, a constrained experimental design method is developed to handle the constraints more efficiently. A radial basis function is used to surrogate time-consuming CFD analysis. An efficient and more robust numerical mesh morphing scheme for the hypersonic vehicle is developed for the generation of high-quality meshes. Within this paper, a novel adaptive infilling strategy is proposed which uses an inaccurate search technique coupled with an elite archive. This allows the location of a more promising sample region and hence improves the surrogate accuracy, thereby further enhancing the optimization efficiency. A hypersonic vehicle aerodynamic design problem is solved using the proposed approach and satisfactory results are obtained at much lower computational costs. The lift-to-drag ratio is increased by 23.8% when compared with the base configuration while also satisfying the volume and lift constraints. The pressure and Mach contours have been compared with those of the base configuration and the results demonstrate the strength of the optimized configuration. The modified sequential approximate optimization for designing an improved hypersonic vehicle is worth referencing in future work.