旋流杯结构及进气参数对燃烧性能的影响

为优化旋流燃烧室头部结构、提高其运行性能,针对三种旋流器文氏管和燃料喷嘴的组合结构和两种流通面积的旋流器,开展了常压下以甲烷为燃料的燃烧室性能实验研究。实验结果表明,各头部结构的冷态总压损失系数与来流速度的平方成正比,燃料喷嘴插入文氏管的位置过深或过浅都会增大流动阻力,在来流速度9.7m/s条件下,喷嘴处于中等插入位置时总压损失系数降低6%左右;开放空间下,燃料喷嘴的位置越浅越利于火焰稳定,受限条件下这种影响被缩小,并且受限火焰的稳定工作范围明显宽于相同入口条件下的开放火焰;增大旋流器流通面积有利于降低总压损失系数、增强火焰稳定、减轻火焰筒壁面振动幅度,但不利于促进燃料和空气掺混,导致NO和CO的排放浓度都变大;在临近贫油熄火状态时,火焰筒壁面振动幅度加剧,明显高于稳定燃烧时的情况。     

FL—23风洞洞壁对跨声速颤振的干扰影响

本文提供了在FL-23风洞中进行的试验研究结果。试验采用动力相似的四种不同尺寸的60°三角机翼平板半模型。结果表明:洞壁干扰提高了跨声速颤振临界速压,当模型展长对试验段宽度的比值Lm/B为0.687、0.600和0.512时,使颤振临界速度的压缩性修正系数分别减小3.8％、2.5％和1.4％。改变开孔率的试验定性验证了上述结果的合理性。     

Detection performance in K-distributed and correlatedRayleigh clutters

Performance prediction for a detection system employing noncoherent integration is carried out for a chi-square family of fluctuating targets in K-distributed clutter plus noise. The detection performance for Swerling 11 targets in the K-distributed clutter plus noise is compared with that in exponentially correlated Rayleigh clutter. The results show that the performance prediction based on N pulses integrated in clutter plus noise using the K-distributed clutter model may be approximately equivalent to that using the exponentially correlated Rayleigh-distributed clutter model     

Direct Evaluation of Radar Detection Probabilities

A simple and effective procedure for evaluating detectionperformances in radar and sonar detection problems is derived forboth fixed-threshold and adaptive-threshold detection. Using theprocedure, the cumulative probabilities of the test statistic can bedirectly evaluated from the moment generating functions bycalculating residues. The exact formulae for computing the detectionperformances for the chi-square family of fluctuating targets withan integer fluctuation parameter are given in a finite sum formwithout any special functions for both fixed threshold and cellaverageconstant false-alarm rate detection by using the methoddeveloped here.     

飞机平尾偏角引动量的自动检测

根据飞机纵向操纵系统工作原理和纵向平飞操纵原理，推导了平衡速度与平尾偏角的关系式，分析了操纵杆力、平衡速度、平尾偏角的相互关系及平衡速度的调整原理。结合平尾偏角检测现状，提出了一种利用机械臂自动检测飞机平尾偏角的方法，成功研制了平尾偏角自动检测仪，并用于平衡速度的调整。反复检测表明：该检测仪可取代目前广泛使用的人工检测方法，提高了飞机维修保障能力，具有较大的推广前景。     

环路热管内工质流动特性的研究

由于环路热管（LHP）具有高传热性能、远距离传输热量、优良的控温特性和管路的可任意弯曲、安装方便等特点，使LHP在航天热控领域有着广泛的应用前景。文章对LHP内工质的流动压力降进行了分析和计算；对毛细芯所能提供的最大蒸发传热能力进行了预测，并结合实验研究综合分析了毛细芯结构对LHP性能的影响。     

基于连续覆盖特性分析的星座设计

研究了需要对地面目标进行连续覆盖的星座的设计问题．首先推导了对覆盖性能有重要影响的星间覆盖间隔时间和轨道面覆盖间隔时间的计算公式，通过算例针对不同配置的星座进行了计算，使用工程仿真软件STK验证了分析结果．通过理论分析、算例计算以及工程仿真为该类型星座设计提供了理论指导。     

An innovative study on low surface energy micronano coatings with multilevel structures for laminar flow design

Laminar flow design is one of the most effective ways to reduce the drag of a commercial aircraft by expanding the laminar flow region on the surface of the aircraft. As material science develops, the emergence of new materials such as low surface energy materials has offered new choices for laminar flow design of commercial aircraft. Different types of low surface energy micro-nano coatings are prepared to verify the effects on the boundary layer transition position and the drag of the airfoil through wind tunnel tests. The infrared thermal imaging technology is adopted for measuring the boundary layer transition, while the momentum integral approach is employed to measure the drag coefficient through a wake rake. Infrared thermal imaging results indicate that the coatings are capable of moving backward the boundary layer transition position at both a low velocity of Mach number 0.15 and a high velocity of Mach number 0.785. Results of the momentum integral approach demonstrate that the drag coefficients are reduced obviously within the cruising angle of attack range from 1° and 5° by introducing the low surface energy micro-nano coating technology.     

基于STM32的视频流图像更新方法的研究

对基于STM32系统低速(工作主频72MHz)视频流处理显示更新方案的研究。结合图像处理基本理论,分析传统的显示方法的不足,并提出一种新的视频流图像更新的方法,通过一定的实验数据和理论结果,验证该方法可行性。     

低速大转矩永磁游标电机在发酵罐中的应用

采用秸秆生产丁醇时,为了达到高效率发酵,需要使发酵液中菌体分布均匀,所加物料需要及时搅拌。工业化生产丁醇的发酵罐尺寸较大,搅拌过程对驱动电机的输出转矩要求较高,因此高效率、小体积、低速大转矩的秸秆发酵搅拌电机对工业化发酵生产丁醇意义重大。设计了一种定转子永磁游标电机用于发酵液搅拌,并对电机的槽极数、电磁性能进行了具体的研究。制造样机并采用滞环控制实现了对液态发酵对象的快速响应,且实现了低能耗、高效率的发酵过程。