VCSmx在大规模FPGA设计测试中的应用

为了满足各种复杂的大规模FPGA设计的测试任务的需要,同时保证测试质量,提高测试效率,必须拥有专业的测试技术和流程。软件仿真可调性强,借助高性能高容量的测试软件和测试服务器,可以有效地提高测试效率,能够测试目前乃至将来一段时间大规模复杂FPGA设计,保证了设计质量和开发的成功率。     

三维编织复合材料及其RTM成型工艺

文章阐述了三维编织工艺,并将三维编织复合材料的性能与传统铺层复合材料的性能作了比较。同时,还介绍了其成型方法—RTM工艺的原理及特点,并提供了一种适于RTM工艺的树脂体系。     

一种等离子体卡塞格仑抛物面隐身天线的设计

研究等离子体卡塞格仑抛物面隐身天线一体化设计的关键性问题。根据双反射面天线的经典理论设计公式得出卡塞格仑抛物面天线的设计参数,仿真计算传统卡塞格仑抛物面天线及等离子体卡塞格仑抛物面天线的辐射特性和散射特性。研究结果表明,等离子体卡塞格仑抛物面天线具有和传统金属反射体卡塞格仑抛物面天线一样的辐射性能,同时由于等离子体产生和消失的可控性,不工作时就只有介质外壳,具有极低的RCS,从而大大提高了反射面天线的隐身性能。     

一种用于ACSR的主从机并行处理系统

以微机、ＬＨ－ＳＣ１６Ａ型Ａ／Ｄ板、ＳＣ５０型Ｄ／Ａ板以及ＴＭＳ３２０Ｃ３０Ａ型ＤＳＰ板为基础，建立了时域结构响应主动控制的主从机并行处理系统。这一系统具有多通道快速运算能力，可提高控制系统的控制律，更新速率，改善控制系统的跟踪能力。     

一种基于极大似然估计的信号盲抽取算法

针对盲信号抽取问题,根据极大似然估计原理,给出一种基于极大似然估计的分步盲抽取算法。根据信号不同的延时特性确立抽取信号,完成第一步抽取。由于初步抽取信号存在噪声污染,根据极大似然估计,估计抽取信号的概率密度函数,确立优化代价函数,利用自然梯度方法进行优化,确立最终抽取向量迭代方式,完成对抽取信号优化处理。通过仿真证明算法具有良好的收敛性和抗噪性,在SNR17 d B时,抽取信号与源信号的相似度达到95%。     

多媒体煤矿安全监测管理系统研究

介绍了现有的煤矿安全监测和安全考勤管理系统的特点及缺陷，探讨了如何将多媒体计算机技术应用于煤矿安全监测管理系统。该系统具有实时监视、紧急救援和事故分析三大特点。     

高校图书馆向社会服务的探索

本文就高校图书馆在市场经济体制下向社会服务的重要性、可能性、服务的途径和方式进行了探讨。     

机床实体模型复模态空间动位移显示技术的研究

介绍了用实体模型在复模态空间显示机床整机动位移的原理和方法。并在VC++6.0开发平台上用OpenGL语言开发了相应软件。解决了以往同类软件动画效果不能真实地表现实际机床整机的动态位移情况的难题。     

Multi-channel discharge characteristics cutting by ultra-fine wire-EDM

Compared with a copper wire electrode, molybdenum wire with a poor conductor is usually used as the electrode in high speed wire-cut electrical discharge machining(HSWEDM), so the resistance of an ultra-fine wire cannot be ignored. To study the differences of discharge characteristics between the ultra-fine wire and the conventional diameter wire, the continuous discharge waveform of two kinds of wire electrodes was compared. It was found that there was a multichannel discharge phenomenon in the...     

A method of estimating GPS instrumental biases with a convolution algorithm

This paper presents a method of deriving the instrumental differential code biases (DCBs) of GPS satellites and dual frequency receivers. Considering that the total electron content (TEC) varies smoothly over a small area, one ionospheric pierce point (IPP) and four more nearby IPPs were selected to build an equation with a convolution algorithm. In addition, unknown DCB parameters were arranged into a set of equations with GPS observations in a day unit by assuming that DCBs do not vary within a day. Then, the DCBs of satellites and receivers were determined by solving the equation set with the least-squares fitting technique. The performance of this method is examined by applying it to 361?days in 2014 using the observation data from 1311 GPS Earth Observation Network (GEONET) receivers. The result was crosswise-compared with the DCB estimated by the mesh method and the IONEX products from the Center for Orbit Determination in Europe (CODE). The DCB values derived by this method agree with those of the mesh method and the CODE products, with biases of 0.091?ns and 0.321?ns, respectively. The convolution method's accuracy and stability were quite good and showed improvements over the mesh method.