冷却速度对TG6钛合金均温区组织性能的影响

通过焊接热模拟试验研究冷却速度对TG6钛合金焊接热模拟均温区组织性能的影响。结果表明:在空冷状态下均温区达到最佳的性能,随着冷却速度的增大,均温区的抗拉强度稍有提高,拉伸延伸率及断面收缩率没有明显变化;冲击韧性空冷达到最大值,水冷稍有下降;显微硬度随冷却速度增大而增加。     

弹道导弹突防中的相参干扰

分析了相参干扰相对于噪声干扰的优缺点.在此基础上,针对弹道导弹突防的特殊应用,对相参干扰的反应时间设计、假目标密度设计以及多目标的干扰问题展开了分析研究,得出了一些有益的结论.     

异构无人系统协同作战关键技术综述

针对异构无人系统的规模、异构性强弱,对异构无人系统进行了分类,引入了异构无人系统协同作战班组的概念以及应用设想,并通过城市环境中异构无人系统协同作战问题为牵引,提出了异构无人系统协同作战面临的挑战与解决思路,在此基础之上,从异构无人系统协同控制架构、协同任务规划、智能交互、目标感知、环境感知等主要方面对异构无人系统协同作战的关键技术进行了分析,最后对异构无人系统协同作战目前的研究进展与挑战进行了总结。     

超低轨道卫星应用离子电推进技术方案

低地球轨道大气环境对诸如科学探测和对地观测卫星的阻尼作用十分明显,而且阻尼随太阳和地磁活动以及昼夜、季节交替变化范围宽.为了保证卫星轨道精度或飞行状态满足任务要求,需要利用推进系统对卫星受到的阻尼进行实时或间歇式补偿以实现轨道或飞行状态的保持.针对轨道高度220～268 km的无拖曳飞行和轨道维持应用,基于卫星轨道阻尼...     

中国空间探测领域40年发展

中国空间科学学会成立的40年,是中国空间探测逐渐走进世界舞台的40年,空间探测极大推动了空间科学和相邻学科的发展,也影响到经济、军事和日常生活诸多方面.本文简要回顾了从空间探测专业委员会成立的1980年至今,中国空间探测领域的主要发展历程,包括探空火箭、高空气球、科学卫星、月球与行星探测、载人航天空间探测、遥感卫星地面...     

列车交会动态压力波实车测试系统的开发与应用

简述了列车交会动态压力波实车实验测试系统的组成和基本原理。系统以压阻式压力传感器、数据采集仪和微机为核心,应用超声、红外检测技术,实现了列车交会压力波、交会车辆侧壁间距及相对车速的同时测量,并成功应用于广深线实车实验中。文中还探讨了实车实验中存在的其它问题和解决方法     

乘务类学生英语课程教学方法实证探析

通过问卷调查探析乘务类本科生对交际和非交际教学法及活动的认识和态度,旨在研究一种可以有效提高英语教学质量的方法.结果表明乘务类学生对交际教学活动和非交际教学活动都有偏好,因此对于此类学生更为有效的教学方法就是采取折中的综合性教学法.     

Measurements of heat transfer and pressure in a trailing edge cavity of a turbine blade

 An experimental investigation is conducted to obtain the heat transfer and pressure drop data for an integral trailing edge cavity test section that simulates a novel turbine blade's internal cooling passage with bleed holes. Local heat transfer is measured on both the suction and pressure sides by a transient liquid crystal technique, while pressures at six positions are recorded by pressure calibrators. Moreover, flow characteristic and its effect on heat transfer are analyzed for conditions with or without bleed flow. The experimental results show that, in the cases with bleed flow, local heat transfer on the pressure side exceeds that on the suction side in the first and second channels. In the cases without bleed flow, in the first and third channels, local heat transfer on the suction side weakens whilst it increases significantly on the pressure side. For the second channel, non-bleed condition leads to a more balanced heat transfer distribution between the upstream and downstream channel. Besides, after the bleed holes are blocked, heat transfer in the first bend region on the suction side declines sharply, while the opposite phenomenon occurs for the second bend region on the pressure side. In both bleed and non-bleed cases, the total pressure of six measurement positions decreases continuously along the channel at the same Reynolds number and it promotes for higher Reynolds number. Among all the measurement points, under the same flow rate condition, the highest speed occurs at Position 5, which also shows the maximum difference between the total and static pressures. When the bleed holes are blocked, the total pressure at each measurement position appears to increase.     

时延平滑系统对实时数据传输影响分析

在实时数据传输过程中,科考船海事卫通链路会出现数据丢包和乱序数据处理不当的问题。通过分析科考船海事卫通链路系统组成,数据传输协议和类型,数据传输时延及抖动,时延平滑系统工作机制和处理流程等,发现时延平滑系统设计上存在缺陷。针对这一缺陷,提出在时延平滑系统中增加数据包分点实时监测、序号判定、序号重排等改进方法,对时延平滑系统的处理流程进行了完善。通过搭建仿真环境并进行模拟演练,验证了改进设计方法的可行性;在某工程应用中,科考船海事卫通链路采用改进后的时延平滑系统,未出现丢包和乱序问题,达到了预期效果。     

Multi-objective Optimization Method for Automatic Drilling and Riveting Sequence Planning

 There are numerous riveting points on the large-sized aircraft panel, irregular row of riveting points on delta wing. It is es-sential to plan the riveting sequence reasonably to improve the efficiency and accuracy of automatic drilling and riveting. Therefore, this article presents a new multi-objective optimization method based on ant colony optimization (ACO). Multi-objective optimization model of automatic drilling and riveting sequence planning is built by expressing the efficiency and accuracy of riveting as functions of the points’ coordinates. In order to search the sequences efficiently and improve the quality of the sequences, a new local pheromone updating rule is applied when the ants search sequences. Pareto dominance is incorporated into the proposed ACO to find out the non-dominated sequences. This method is tested on a hyperbolicity panel model of ARJ21 and the result shows its feasibility and superiority compared with particle swarm optimization (PSO) and ge-netic algorithm (GA).