机器人焊接系统离线编程实例研究

介绍某型号发动机的机器人焊接系统,对机器人焊接系统离线编程进行研究.提出基于SolidWorks平台的弧焊机器人离线编程与仿真系统的解决方案.     

基于FPGA的数据接口电路设计

鉴于FPGA设计数字电路的多种优势,针对星上相机输出数据格式和地面采集系统接收数据格式不一致性,改变传统的设计方式,进行了基于FPGA的数据接口电路设计。文章描述了电路设计的基本原理、实现方案、时序仿真,并对电路设计中遇到的关键问题的解决进行了阐述。其中实现方案包括FPGA外围电路硬件设计和FPGA芯片内软件时序设计。     

The effect of small vibrations on Marangoni convection and the free surface of a liquid bridge

The effects of small vibrations on Marangoni convection were investigated experimentally using a liquid bridge of 5 cSt silicone oil with a disk diameter of 7.0 mm, and an aspect ratio close to 0.5. Experiments were performed to determine the critical temperature difference data for no vibration case and with small vibrations applied. The experimental results have shown that the effect of small vibrations on the onset of oscillatory flow is small since the critical temperature difference data for different aspect ratios were not affected by the vibrations. To clarify the surface oscillation phenomena induced by external vibrations, a 3-D numerical simulation model was also developed using a level set algorithm to predict the surface oscillations of isothermal silicone oil bridges. By subjecting the liquid bridge to small vibrations, the surface oscillation characteristics were predicted numerically, and the numerical results compared well with the predictions of an analytical model proposed previously. Furthermore, the effect of small vibrations on the surface vibration amplitude of the liquid bridge is also discussed.     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

航迹跟踪的优化方法研究

最优航迹跟踪要求飞机的实际飞行航迹与理想航迹的偏差最小,但若采用按偏差的最优控制方法,会造成控制变量的剧烈震荡.为了解决控制变量的剧烈震荡问题,提出了一种新的偏差-微分综合控制方法.通过对参考航迹的跟踪验证,表明该方法有效地解决了控制变量最优解的振荡问题,并实现了精确的航迹跟踪性能.     

软件测试的度量方法及其应用

软件测试是找出软件中的错误,它是保证软件质量的关键,软件测试的度量是对影响软件测试的属性所进行的定量测量.本文简述了应用软件测试度量技术时所应具有的基本知识,通过一个实例,介绍并讨论了一种实用的关于软件测试进度安排和软件错误数的度量方法.     

强场脉冲充磁退磁装置

介绍了充电电容器通过磁路瞬时放电产生强磁场的原理 ,选择回路参数可实现高矫顽力类永磁材料的充磁或者退磁 ,介绍了所研制的脉冲充磁退磁装置的性能。     

柔性冗余度机器人动力学规划

考虑机器人的结构柔性,研究了利用冗余度机器人的"自运动"同时进行振动抑制和机器人关节力矩优化的方法.研究表明,在进行柔性冗余度机器人的动力学优化时,应从振动和关节力矩两方面考虑.若单考虑振动抑制,机器人的关节力矩将可能无穷增大,使算法失效;若单考虑关节力矩优化,机器人臂末端的振动将有可能发散.这里给出的算法同时考虑了这两方面.不同于冗余度机器人传统的优化方法--机器人雅克比矩阵的零空间优化法,这里从最优控制论的方法着手,研究了考虑结构变形的冗余度机器人利用其自身的"自运动"进行振动抑制和关节力矩优化.仿真结果,证明了这种优化方法是完全可行的.