航空发动机推力测量台架原理误差分析

为研究影响航空发动机推力测量台架系统原理误差的因素及作用,针对发动机弹簧片支撑式推力测量台架,以推力偏心假设为基础建立其力学模型,采用理论分析和仿真验证相结合的方法对某试车台架进行原理误差分析.在给定条件下,台架在竖直平面和水平面内的角偏心远小于推力角偏心,并不会对推力测量造成显著影响,台架结构变形引起的角偏心也很小.相比之下,原理误差影响最大的因素依次为推力角偏心、热变形和弹阻力,原理误差分别为0.38％、0.16％和0.04％,应加以控制.当推力偏心量造成的原理误差不能满足精度指标时,需采用原位加载系统或者矢量推力测量台架来评估.     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

Adaptive Gaussian sum squared-root cubature Kalman filter with split-merge scheme for state estimation

The paper deals with state estimation problem of nonlinear non-Gaussian discrete dynamic systems for improvement of accuracy and consistency. An efficient new algorithm called the adaptive Gaussian-sum square-root cubature Kalman filter（AGSSCKF） with a split-merge scheme is proposed. It is developed based on the squared-root extension of newly introduced cubature Kalman filter（SCKF） and is built within a Gaussian-sum framework. Based on the condition that the probability density functions of process noises and initial state are denoted by a Gaussian sum using optimization method, a bank of SCKF are used as the sub-filters to estimate state of system with the corresponding weights respectively, which is adaptively updated. The new algorithm consists of an adaptive splitting and merging procedure according to a proposed split-decision model based on the nonlinearity degree of measurement. The results of two simulation scenarios（one-dimensional state estimation and bearings-only tracking） show that the proposed filter demonstrates comparable performance to the particle filter with significantly reduced computational cost.     

对接口匹配的航天器双主动最优交会研究

研究了两航天器协同轨道机动（双主动）完成近距离交会任务的最优控制问题。在考虑航天器姿态变化、对接口位置及路径约束的情况下,构建了完整的6自由度、26状态的双主动最优交会数学模型。利用高斯伪谱法分别将燃料总消耗最少和交会时间最短两种最优问题离散为大型非线性规划问题,而后应用SNOPT软件包进行了求解。在此基础上通过大量数值计算分析总结了不同初始参数对最小燃料消耗和最短交会时间的影响规律,并与主被动交会形式进行了对比。结果表明,当两航天器质量接近时,双主动交会通常可明显减少燃料消耗,或缩短交会时间;而当质量差距较大时,双主动最优交会逐渐退化为主被动最优交会。     

载人航天的热真空试验

据对国外情况的调研,讨论了载人航天热真空试验的特点与试验目的,提出了三类15项试验项目;讨论了载人航天器整体热真空试验的必要性,提出了分别进行舱外与舱内环境下的单舱或联舱试验的建议;分析了载人航天器热真空试验的特点与应用,提出了在卫星用试验设备上附加航天员所需专门装置,满足试验需要的设想。     

Fourier methods for turbomachinery applications

Rapid increase in computing power has made a huge difference in scales and complexities of the problems in turbomachinery that we can tackle by use of computational fluid dynamics (CFD). It is recognised, however, that there is always a need for developing efficient methods for applications to blade designs. In a design cycle, a large number of flow solutions are sought to interact iteratively or concurrently with various options, opportunities and constraints from other disciplines. This basic requirement for fast prediction methods in a multi-disciplinary design environment remains unchanged, regardless of computer speed. And it must be recognised that the multi-disciplinary nature of blading design increasingly influences outcomes of advanced gas turbine and aeroengine developments. Recently there has been considerable progress in the Fourier harmonic modelling method development for turbomachinery applications. The main driver is to develop efficient and accurate computational methodologies and working methods for prediction and analysis of unsteady effects on aerothermal performance (loading and efficiency) and aeroelasticity (blade vibration due to flutter and forced response) in turbomachinery. In this article, the developments and applications of this type of methods in the past 20 years or so are reviewed. The basic modelling assumptions and various forms of implementations for the temporal Fourier modelling approach are presented and discussed. Computational examples for realistic turbomachinery configurations/flow conditions are given to illustrate the validity and effectiveness of the approach. Although the major development has been in the temporal Fourier harmonic modelling, some recent progress in use of the spatial Fourier modelling is also described with demonstration examples.     

高雷诺数时串列双圆柱脉动压力的实验研究

本文通过风洞实验给出了二维串列双圆柱在高雷诺数时(分别为Re=3.25×10~5和Re=6.5×10~5)的脉动压力分布。实验在低湍流度的均匀流中进行,模型表面光滑。实验结果表明:在这二种分别属于高亚临界和低超临界雷诺数下,串列双圆柱不同间距比时的脉动压力分布差别很大。Re=3.25×10~5时前后圆柱间的相互干扰对圆柱表面脉动压力分布的影响要比Re=6.5×10~5时大得多,而且二者干扰的规律和特性也截然不同。     

对称奇异线性方程组极小范数解的迭代法

给出了求对称奇异线性方程组Ａｘ＝ｂ极小范数解的迭代算法，其迭代公式为此处／为秩是，ｒ（ｒ＜ｎ）的ｎ阶实对称矩阵，Ｅ为ｎ阶单位阵，ｂ为ｎ维列向量，ｍ为正整数，ε为正实数。证明了这类选代算法的收敛性，讨论了它的事先误差估计式和事后误差估计式。作为应用，给出了求超定线性方程组极小最小二乘解的迭代算法、特征向量导数计算的迭代算法和对于病态正定线性方程组。本文的选代算法可改善病态条件，算例表明也是有效的。     

航天器在轨寿命预测与可靠性评价

文章重点分析了航天器在轨寿命和可靠性的影响因素,提出了航天器在轨寿命预测和可靠性评价的基本研究思路并分析了研究的内容,提出了航天器基础在轨寿命的概念。     

压气机线性振荡叶栅气弹试验研究（二）：叶尖间隙的影响

 为了加强对叶轮机三维气动弹性机理的理解,为数值模拟方法提供试验验证数据,开展了压气机线性叶栅气动弹性试验研究。本研究分为2个部分,第1部分研究压气机线性振荡叶栅的气弹稳定性,本文为第2部分,重点辨别叶尖间隙对压气机叶片气弹稳定性的影响。试验结果表明随着叶尖间隙的增加,间隙流对振动叶片有失稳影响,其影响范围几乎遍及整个叶高,这与非定常气动的瞬时径向相互作用的结论是一致的。这种失稳效应与叶片间相位角对叶栅气弹稳定性的影响不耦合。间隙流在叶栅稳定性最差时影响最显著。详细的非定常压力试验结果表明,随着叶尖间隙的增加,叶片表面非定常压力幅值减小区域与间隙流造成的卸载区域相对应。由试验结果可以推断,不考虑叶尖间隙的数值模型可能会给出过稳定的叶片颤振预测。