Analysis and design of (LC)(LC)-type series-parallel resonantconverter

A series-parallel resonant converter employing (LC)(LC)-type tank circuit operating in lagging power factor (PF) mode is presented and analyzed using complex ac circuit analysis. Design curves are obtained and the converter is optimized under certain constraints. Detailed Space Integrated Control Experiment (SPICE) simulation results are presented to evaluate the performance of the designed converter under varying load conditions. Results obtained from an experimental converter are also presented. The results obtained from the theory, SPICE simulation, and the experimental converter are compared. The proposed converter has high efficiency from full load to very light load (<10%). Switching frequency variation required for a wide change in the load (near load open circuit to full load) is narrow compared with the series resonant converter (SRC)     

Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

Optical guidance for autonomous landing of spacecraft

An autonomous rendezvous guidance scheme for spacecraft to descend to small celestial bodies by using optical information is presented. First, a new guidance, navigation, and control (GNC) method based on fixation-point (FP) inheritance is proposed. A spacecraft can safely descend toward the target point on the celestial body by tracking and autonomously renewing the FPs on the surface. Next, we deal with the method of extracting the FPs. A spatial band-pass filter (BPF) is applied to pictures taken to enhance features having comparable size with the tracking window. Local variance of the filtered image is used as a criterion of the extraction. Then, the relative information between the spacecraft and the celestial body (position, velocity, attitude, etc.) is calculated from the image coordinates and the range measurements of the FPs from the spacecraft. To suppress observation noise and improve navigation accuracy, an application of the extended Kalman filter is also presented. Finally, simulations are conducted to verify the guidance precision and the fuel consumption of the proposed guidance scheme     

A comparison of semi-empirical models in the lower thermosphere

Semi-empirical models are derived predominantly from satellite-borne observations. The nature of these observations restricts the applicability of the models mainly to the atmospheric regions sampled, i.e. the upper thermosphere. Current models are only capable of reproducing a zero-order approximation of the structure of the lower thermosphere. Based on selected examples, the progress in atmospheric research since CIRA-72 as well as the continuing deficiencies are demonstrated.     

The Venus ionosphere

Physical properties of the Venus ionosphere obtained by experiments on the US Pioneer Venus and the Soviet Venera missions are presented in the form of models suitable for inclusion in the Venus International Reference Atmosphere. The models comprise electron density (from 120 km), electron and ion temperatures, and relative ion abundance in the altitude range from 150 km to 1000 km for solar zenith angles from 0° to 180°. In addition, information on ion transport velocities, ionopause altitudes, and magnetic field characteristics of the Venus ionosphere, are presented in tabular or graphical form. Also discussed is the solar control of the physical properties of the Venus ionosphere.     

Travelling heater growth of GaSb under reduced gravity during the first spacelab-mission

Single crystals of binary III-V-semiconductors, e.g. GaAs or InP, are important basic materials for optoelectronic devices, e.g. LED's and lasers. Device production needs highly perfect substrate crystals with low defect densities and homogeneous dopant distributions. In our experiment we applied the Travelling-Heater-Method to grow the III-V compound GaSb. The aim of this research project was to improve the crystal quality by investigating convective transport phenomena and the origins of dopant inhomogeneities under earth and space conditions. Earth grown crystals show strong dopant variations mainly due to convective flow phenomena. The preliminary result of our SPACELAB 1 experiment reveals an increase of dopant homogeneity in the space grown crystal because of the absence of natural convection under reduced gravity.     

Mesospheric ozone densities deduced from solar occultation measurements

Quartz-UV occultation measurements by the satellite Interkosmos-16 have been used to calculate ozone densities at altitudes between 50 and 90 km for the period August to October 1976. Below 65 km densities agree well with the Krueger-Minzner-model. Mesopause densities have been studied in some detail. A certain percentage of the profiles show close correlation with the model of Shimazaki and Laird (with a pronounced minimum below the mesopause) while others fit better to the Park and London model (no minimum). This variability of the ozone density may be caused by different processes in the photo-chemistry of ozone. Two possible causes, the temperature dependent rate coefficients and the odd hydrogen processes are discussed in greater detail.     

Simultaneous dual wavelength observations of an impulsive microwave burst using the V.L.A.

Simultaneous observations of a microwave burst at 2 and 6 cm wavelengths were carried out with the Very Large Array (VLA). The 6 cm burst source is located close to a magnetic neutral line, presumably near the top of a flaring loop, while the 2 cm emission originates from the footpoints of the loop. It is concluded that the 6 cm emission is dominated by gyrosynchrotron radiation of the thermal electrons in the bulk heated plasma at a temperature of ～ 4 × 10⁷ K, while the 2 cm emission is due to nonthermal particles released and accelerated during the flare process. From the observed low degree of polarization and the lack of the 2 cm source cospatiality with the 6 cm source a magnetic field of 200–350 G and δ ? 4 are estimated in the flare energy release site. A DC electric field flare model is invoked to explain the long delay between the peaks at the two wavelengths. From the delay, the strength of the electric field is estimated to be 0.2–4 μ statvolt cm^?1 in the flaring region.     

Extraction of mineral elements from inedible wastes of biological components of a life-support system and their utilization for plant nutrition.

Two methods of extracting mineral elements from otherwise deadlock products of a life-support system are presented. We describe first optimum conditions for recovering elements by water extraction from dry wastes of plants, biomass ash, and solid human wastes after passing them through the catalytic furnace; and, second, we describe acid extracts of biogenous elements by 1N and 2N HNO3 from these products. Ways to use the extracts of elements in plant nutrition are considered in order to increase the extent to which the mineral loop of a life-support system can be closed.