基于MATLAB的现代优化算法在飞行器气动外形设计中的应用

本文发展了MATLAB语言环境下的现代优化算法，包括遗传算法、模拟退火算法和基于分支联赛选择的多目标遗传算法，并用来求解高超声速飞行器气动外形参数优化问题。所研究的气动外形为带控制舵飞行器和可变弯体飞行器。在MATLAB环境下，求解了最大化升阻比的单目标优化问题和具体有两个冲突目标（最小化铰链力矩并且最大化平均操纵效率）的多目标优化问题。实际算例表明，在快速有效的气动力分析方法辅助之下，本文所发展的MATLAB现代优化算法可以在飞行器初始设计中发挥作用。本文所提供的现代优化算法是对MATLAB优化工具箱的一个有益的扩展。     

一类单通道信号的时频分析

根据循环平稳信号分析理论，对一类单通道信号进行了时频分析，并在此基础上提出了利用该信号在不同时段功率差值提取目标位置的方法，其最大优点在于可以固定中频带宽，从而省去滤波器组，同时具有精度高、抗噪声性能强的特点。仿真结果表明，采用功率检波法得到的结果与理论值是吻合的。     

微重力环境中重力梯度加速度引起的流体晃动力和力矩的模拟

本文研究了关于旋转轴在贮箱的非对称轴上且远离贮箱的几何中心情况下，流体在微重力环境中由重力梯度加速度诱发的晃动特性。我们以精密Ｘ光光谱天文物理实验卫星（简称ＡＸＡＦ－Ｓ）作为研究对象，获得了由于旋转运动引起的重力梯度加速度的数学表达式。关于晃动问题的数值计算是用与卫星固连的非惯性坐标系为基础，目的是寻求一种较为易处理且适合于流体力学方程的边界和初始条件。通过数值计算获得了流体作用于卫星贮箱上的力和力矩。     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

近期商用单级入轨飞行器的可行性

讨论了单级入轨火箭推进飞行器,尤其是使用航天飞机外置贮箱和六个航天飞机主发动机的一次性使用飞行器的可靠性和发射费用。减小发动机质量将是方案改进的主要方面。如果低成本、小质量的主发动机研制成功,那么一次性使用 SSTO(单级入轨)飞行器将拥有商用发射前景,而且有利于可重复使用 SSTO 飞行器的研制。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

《实用英语》教法研究新思路

本文主要阐明了教师在教授《实用英语》的过程中，应更多地寻找新思路，探求新方法，创造性地使用教材，以交际法为主线，博采众长，为我所用。根椐各流派教法，结合《实用英语》，作者着重讲述了如何灵活安排教学计划，提出课堂教学中切实可行的方法。     

强化实践教学与管理 提高实践质量与效果

本文以《模拟电路》及相关实验为例，分析了实践性教学的现状，找出了实践性教学中存在的问题。最后针对所存在的问题，提出了几点改进措施，以期达到提高实践质量与效果的目的。     

推力中止过程一维不定常气相流动数值计算

准确地预示固体火箭发动机推力中止这一瞬变过程，对飞行器飞行精度及可靠性具有重要意义。建立了一维不定常流动数值计算模型，考虑了传热、摩擦、燃面变化，燃烧室长径比、通喉比等因素，计算了推力中止过程内弹道，给出了燃气参数沿燃烧室长度的分布及随时间的变化。