耐高温聚酰亚胺胶黏剂的研究进展

综述了近年来耐高温聚酰亚胺胶黏剂的研究发展状况，对聚酰亚胺胶黏剂尤其是加成型聚酰亚胺胶黏剂的化学合成方法和胶黏剂结构与性能的关系进行了分析与总结，并对耐高温聚酰亚胺胶黏剂的应用和未来发展趋势进行了展望。     

直齿渐开线齿轮齿面磨损模拟计算

在初步研究直齿轮齿面磨损的基础上,对磨损机理做了进一步的分析研究,综合考虑了摩擦系数、载荷、齿面曲率及滑动系数等影响磨损量的主要因素,提出了齿面磨损量的计算公式,并运用齿面离散化方法进行齿廓磨损的数值计算。     

固冲发动机补燃室流场的实验校测

1引言目前数值模拟已广泛应用到火箭发动机的流场分析中,特别是固冲发动机补燃室的燃烧和流动[1,2]。但是这种方法在固冲发动机补燃室应用的有效性还没有合适的实验验证。国外开展的补燃室流动实验大多以水为介质,用片光流动显示的方法观察流场的概貌,与真实发动机的流动之间存     

深空探测器定位在共线平动点附近的线性策略

深空探测器需要定位在日-地(月)系的共线平动点L1或L2附近执行探测任务,但由于共线平动点的不稳定性,必须在运行期间进行轨控。对于条件周期轨道(如晕轨道)必须在控制过程中考虑高次项,控制条件复杂,技术上实现相对困难。而某些探测任务,探测器定位在共线平动点附近的条件拟周期轨道(对应L issajous轨道)上亦可以。这种类型的轨道可以离共线平动点较近,那么只需要在控制过程中考虑线性项即可,控制条件简单。以圆型限制性三体问题作为基本模型,采用预估-校正法逼近线性化模型下的目标轨道,给出在轨运行期间的轨控策略亦是可取的,这种控制措施相对而言较简单,容易实现。仿真计算结果表明是可行的,能够提供较高的位置精度。     

复合材料三角形层板稳定性分析与实验研究

 给出了正交异性三角形简支板和固支板临界载荷的计算方法。对5种不同铺层的14块碳/环氧层板进行了稳定性实验研究。理论预测与实验结果基本一致。     

用光散射效应分析激波管内膨胀率对水蒸气成核与凝结的影响

用多重光散射法对水蒸气在激波管中的自发成核凝结过程进行了实验研究，分析了膨胀率对成核率和凝结过程的影响。根据理论计算和实测数据结果，所得结论是：膨胀率增大。会造成过饱和度、成核率、凝结质量份额和液滴生长率相应地增大。     

Stochastic Dynamic System Suboptimal Control with Uncertain Parameters

The control of a linear system with random coefficients is studied here. The cost function is of a quadratic form and the random coefficients are assumed to be partially observable by the controller. By means of the stochastic Bellman equation, the optimal control of stochastic dynamic models with partially observable coefficients is derived. The optimal control is shown to be a linear function of the observable states and a nonlinear function of random parameters. The theory is applied to an optimal control design of an aircraft landing in wind gust.     

9. The venus ionosphere and solar wind interaction

The current state of knowledge of the chemistry, dynamics and energetics of the upper atmosphere and ionosphere of Venus is reviewed together with the nature of the solar wind-Venus interaction. Because of the weak, though perhaps not negligible, intrinsic magnetic field of Venus, the mutual effects between these regions are probably strong and unique in the solar system. The ability of the Pioneer Venus Bus and Orbiter experiments to provide the required data to answer the questions outstanding is discussed in detail.     

Multipath-adaptive GPS/INS receiver

Multipath interference is one of the contributing sources of errors in precise global positioning system (GPS) position determination. This paper identifies key parameters of a multipath signal, focusing on estimating them accurately in order to mitigate multipath effects. Multiple model adaptive estimation (MMAE) techniques are applied to an inertial navigation system (INS)-coupled GPS receiver, based on a federated (distributed) Kalman filter design, to estimate the desired multipath parameters. The system configuration is one in which a GPS receiver and an INS are integrated together at the level of the in-phase and quadrature phase (I and Q) signals, rather than at the level of pseudo-range signals or navigation solutions. The system model of the MMAE is presented and the elemental Kalman filter design is examined. Different parameter search spaces are examined for accurate multipath parameter identification. The resulting GPS/INS receiver designs are validated through computer simulation of a user receiving signals from GPS satellites with multipath signal interference present The designed adaptive receiver provides pseudo-range estimates that are corrected for the effects of multipath interference, resulting in an integrated system that performs well with or without multipath interference present.     

直升机六自由度仿真研究

建立了直升机剐体运动的六自由度仿真模型。用试飞数据进行参数识别，建立了气动导数数据库并以此计算气动力；将仿真结果与试飞结果对比，并进行了直升机机动飞行仿真计算。结果表明：六自由度仿真模型能够得到较好的仿真结果。