编队飞行卫星群构型保持及初始化

导出了基于相对轨道要素的编队飞行卫星群轨道相对运动控制的轨道机动方程；提出了编队飞行卫星群轨道相对运动控制的轨道机动控制策略，利用不同方向的脉冲控制相对运动的轨道参数，包括轨道平面内机动和轨道平面外机动控制。根据相对轨道要素的变轨机动控制，进行编队飞行卫星群构型的初始化。这样的构型初始化可以视作一次特殊的变轨机动控制，很容易实现编队飞行构型的初始化机动。     

平台摇摆对卡尔曼滤波跟踪精度的影响

通过建立目标相对运动坐标系和目标相对运动观测模型,研究了在平台摇摆影响下,跟踪系统观测到的目标运动状态的变化。在分析捷联垂直基准补偿原理的基础上建立了捷联垂直基准平台摇摆角补偿模型,建立的模型结合捷联垂直基准系统的测量能力对其补偿算法进行了理论推导,使模型适用于实际捷联垂直基准系统。通过建立模型以及仿真研究了平台摇摆作用下卡尔曼滤波跟踪精度的变化,指出了摆造成卡尔曼滤波跟踪精度降低甚至离散的主要原因在于模型误差增大。设计仿真实验验证了结论的正确性,为进一步改进跟踪手段提供了理论参考。     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

Aircraft nonlinear stability analysis and multidimensional stability region estimation under icing conditions

Icing is one of the crucial factors that could pose great threat to flight safety,and thus research on stability and stability region of aircraft safety under icing conditions is significant for control and flight.Nonlinear dynamical equations and models of aerodynamic coefficients of an air craft are set up in this paper to study the stability and stability region of the aircraft under an icing condition.Firstly,the equilibrium points of the iced aircraft system are calculated and analyzed based on the theory of differential equation stability.Secondly,according to the correlation theory about equilibrium points and the stability region,this paper estimates the multidimensional stability region of the aircraft,based on which the stability regions before and after icing are compared.Finally,the results are confirmed by the time history analysis.The results can give a reference for stability analysis and envelope protection of the nonlinear system of an iced aircraft.     

MSG-3在民用航空器维修大纲制定中的应用

国内民用航空器的研发起步较晚,目前投入运行的国产航空器型号种类和数量都不多,航空器制造厂家在制定维修大纲方面的经验较少.本文对国际上通行的MSG-3维修任务分析方法进行研究,首先介绍MSG-3维修任务分析方法产生和发展的历史背景,以及其在国内民机型号中的应用;然后详细叙述MSG-3维修任务分析方法(包括航空器系统、动力装置维修任务的分析方法,结构检查和区域检查任务的分析方法,以及形成维修大纲的流程和维修任务的后期优化);最后通过对航空器型号的审查经验,总结我国民用航空器制造厂家在制定航空器维修大纲时存在的问题和改进方向.     

基于格子Boltzmann方法表面形貌对微通道对流换热的影响

为推动微通道冷却技术在航空发动机中的应用,进一步提高航空发动机性能,本文通过扫描电子显微镜、粗糙度扫描仪等多方式扫描得到实际加工物体表面形貌,结合分形理论进行处理,得到真实、光滑、分形插值、康托尔集四类圆形截面管模型,管径100μm~400μm;采用格子Boltzmann方法进行数值模拟,首先通过与文献中实验结果的对比,验证了此方法的正确性,然后对空气在这四类圆形截面微通道中的对流换热特性进行了数值模拟,计算雷诺数Re范围80~640;结果发现：表面形貌是微通道中对流换热不可忽略的因素,相对粗糙度越大越有利于换热,真实扫描管的换热性能要比相同条件下光滑管高2.22%;分形理论可用于微通道表面形貌的构建,在相同迭代次数下,分形插值模型与真实扫描形貌换热性能相差0.03%,而康托尔集模型与真实扫描形貌换热性能相差1.88%,分形插值模型较康托尔集模型更能真实地反映实际形貌;微通道中,随着雷诺数的增加Nu将不再是常数,而是有增加的趋势。     

绿色技术创新对企业成长绩效的影响——基于研发投入强度的调节作用

随着我国经济的高速发展,生态问题日渐凸显.通过技术创新处理好经济发展和生态效益的关系成为实现绿色发展的内在要求.本文利用94家创业板制造业上市公司2014-2017年的数据,采用广义最小二乘法对绿色技术创新、研发投入强度与企业成长绩效之间的关系进行实证分析,探讨了绿色技术创新对企业成长绩效的直接影响,并对研发投入强度的...     

A review of topology optimization for additive manufacturing: Status and challenges

Topology optimization was developed as an advanced structural design methodology to generate innovative lightweight and high-performance configurations that are difficult to obtain with conventional ideas. Additive manufacturing is an advanced manufacturing technique building as-designed structures via layer-by-layer joining material, providing an alternative pattern for complex components. The integration of topology optimization and additive manufacturing can make the most of their advantages and potentials, and has wide application prospects in modern manufacturing. This article reviews the main content and applications of the research on the integration of topology optimization and additive manufacturing in recent years, including multi-scale or hierarchical structural optimization design and topology optimization considering additive manufacturing constraints. Meanwhile, some challenges of structural design approaches for additive manufacturing are discussed, such as the performance characterization and scale effects of additively manufactured lattice structures, the anisotropy and fatigue performance of additively manufactured material, and additively manufactured functionally graded material issues, etc. It is shown that in the research of topology optimization for additive manufacturing, the integration of material, structure, process and performance is important to pursue high-performance, multi-functional and lightweight production. This article provides a reference for further related research and aerospace applications.     

视觉测振技术在柔性太阳翼模态试验中的应用

针对8 m×5 m的柔性太阳翼在倒立状态下进行模态试验,设计数字摄像视觉测振系统,基于图像特征跟踪法实现了从相机标定、图像采集、信息提取到三维振动数据获取的过程,通过工况模态辨识方法获取了柔性太阳翼模态频率及振型等动力学参数。并考虑空气和重力影响建立太阳翼有限元模型,通过与基于基恩士激光位移传感器的传统模态试验结果及仿真分析结果进行对比,验证了基于视觉测振工况模态试验方法的准确性,为柔性太阳翼在轨模态辨识奠定基础。