Performance analysis for DOA estimation algorithms: unification,simplification, and observations

Subspace based direction-of-arrival (DOA) estimation has motivated many performance studies, but limitations such as the assumption of an infinite amount of data and analysis of individual algorithms generally exist in these performance studies. The authors have previously proposed a unified performance analysis based on a finite amount of data and achieved a tractable expression for the mean-squared DOA estimation error for the multiple signal classification (MUSIC). Min-Norm, estimation of signal parameters using rotational invariance techniques (ESPRIT), and state-space realization algorithms. However, this expression uses the singular values and vectors of a data matrix, which are obtained by the highly nonlinear transformation of the singular value decomposition (SVD). Thus the effects of the original data parameters such as numbers of sensors and snapshots, source coherence and separations were not explicitly analyzed. The authors unify and simplify this previous result and derive a unified expression based on the original data parameters. They analytically observe the effects of these parameters on the estimation error     

室温贮存对树脂粘度和加压点的影响

讨论了５４０５改性双马来酰亚胺树脂基体在室温下，贮存时间对粘度以及对固化过程中加压点的影响，给出了相应的计算方法。     

复合材料锥壳0°铺层的自动铺放成型方法研究

研究了一种基于自动铺带技术的复合材料锥壳0°铺层成型方法：根据锥壳构件尺寸将等宽预浸带数控分切成预定尺寸的直角梯形预浸带片，按特定方式铺放到锥壳表面并使每两片拼成一个等腰梯形单元，多个等腰梯单元形构成锥壳的0°铺层；并针对这种成型方法设计了一种实现锥壳0°铺层自动成型的装置。采用该方法及其设备可以实现锥壳0°铺层的自动化制造，提高成型效率、降低废料率、稳定工艺质量，降低装备制造成本。     

基于牛顿欧拉法的3-RPS并联机构逆动力学分析

 以3-RPS机构为例,研究了对称少自由度并联机构的逆动力学问题。因其自由度数目小于6,该类机构的支链不仅传递驱动力,同时还需为动平台提供约束。然而,现有文献大多未对广义约束力给予足够的重视。采用牛顿欧拉法建立了3-RPS机构的刚体动力学方程,给定动平台的运动规律及外载荷后,可一并求解机构所需的驱动力与约束力矩。算例仿真表明,与动平台自由速度方向不一致的外载荷主要需由约束力矩平衡。因此,在对称少自由度并联机构动力学设计中,必须计入广义约束力的影响。     

DS18B20在YWJC-1C型ECS原位检测仪中的应用

主要介绍在YWJC-1C型ECS原位检测仪中单线数字温度传感器DS18B20的测量原理、特性及其温度测量的硬件接口设计和软件设计。     

某重型燃气轮机放气活门及排气管路的改进设计

针对某重型燃气轮机放气系统放气活门在结构设计上存在的问题,经过分析和论证,提出了改进方案,通过计算验证了该方案可以实施。     

叶片锻模的关联设计

为提高叶片锻模的设计效率,提出了叶片锻模的关联设计方法.根据叶片锻模设计在不同阶段的特点,三维图与二维图的关系,以及锻件、分模实体、模具外形和上下模具之间的关系,采用参数化、主模型、引用集、Wave等方法实现叶片锻模设计的关联.     

基于MEMS IMU的舵面运动测量仪

针对飞行器升降舵、副翼角运动的测试需求,提出了单轴捷联姿态系统的原理及算法,介绍了基于MEMS陀螺仪和加速度计的舵面运动测量仪的构成,并对测量仪的工作过程进行了仿真.仿真表明,测量仪的性能满足舵面运动测量的需要.     

降落伞充气过程的数值模拟

 基于降落伞的重要应用与设计的实际需要，降落伞的数值模拟开始得到越来越多的重视，而充气过程是其中最为复杂的一个阶段。本文建立了平面圆形伞主充气过程中的CFD（Computational Fluid Dynamics）与结构动力学的MSD（Mass Spring Damper）之间的耦合模型。流场求解采用稳定性较高的标准k-ε模型，在多块贴体坐标下，获得某时间节点处的流场，并将该流场中的压力数据引入MSD模型，以获得下一时间节点的伞衣形状，最终获得主充气过程中伞衣形状和流场之间的动态关系。数值计算结果和实验结果及经验值比较，均有较好的一致性。充气过程的数值求解有助于提高对降落伞充气过程机理的理解。      

Effect of earth?s rotation and range foldover on space-based radar performance

Space-based radar (SBR) by virtue of its motion generates a Doppler frequency component to the clutter return from any point on the Earth as a function of the SBR-Earth geometry. The effect of the rotation of the Earth around its own axis also adds an additional component to this Doppler frequency. The overall effect of the rotation of the Earth on the Doppler turns out to be two correction factors in terms of a crab angle affecting the azimuth angle, and a crab magnitude scaling the Doppler magnitude of the clutter patch. Interestingly, both these quantities depend only on the SBR orbit inclination and its latitude and not on the location of the clutter patch of interest. Further, the crab angle has maximum effect for an SBR on a polar orbit that is above the equator. The crab magnitude, on the other hand, peaks for an SBR on an equatorial orbit. Together with the range foldover phenomenon, their overall effect is to generate Doppler spread/splitting resulting in wider clutter notches that degrade the clutter nulling performance of adaptive processing techniques. A detailed performance analysis and methods to minimize these effects are discussed here