STAP with medium PRF mode for non-side-looking airborne radar

Space-time adaptive processing (STAP) has been widely discussed for airborne radar systems to improve the system performance of detecting targets. This is especially true for airborne early warning (AEW) radar, which should find long-range and small radar cross section (RCS) targets such as the stealth aircraft and missiles. However, in existing airborne radar literature, STAP is mainly considered for clutter and jamming rejection in side-looking airborne radar (SLAR) applications. There have been fewer discussions on airborne radar with non-side-ways looking array radar (non-SLAR). The STAP of non-SLAR such as forward looking array radar is also very important and can not be avoided for airborne radar to detect targets in all directions. The STAP of the non-SLAR is studied here. A scheme has been proposed, which is processed by the way of STAP combined with multiple staggered medium pulse repetition frequencies (PRFs). We further study the selection of PRFs in order to make the scheme more available for non-SLAR radar. We analyze two typical non-SLAR cases, i.e., inclined-sideways looking array and forward looking array. We examine this scheme by comparing the performances of three processing systems under the criteria of range-velocity blind zone minimization. Computer simulation results show the multiple-PRFs STAP scheme is feasible for non-SLAR and can be applied to phased-array AEW radar systems     

Airborne adaptive MTI scheme with preventing the whitening of thetarget

A new airborne MTI scheme that applies to non-homogeneous clutter environment is presented. Results of simulation have proved that the scheme has a superior ground clutter suppression performance and can effectively prevent the whitening of a target     

关于满足海军需求的直8型直升机的改进

本文对直8型机的发展提出了改进、改型的途径,并进行探讨,以满足适应我海军部队使用的各型直8机。     

小波技术在组合导航系统故障诊断中的应用

针对组合导航系统中存在的故障类型和特点，提出一种新的基于信号处理的故障检测方法。该方法利用小波分析技术对含有故障信息的系统信号进行分析处理，并将此方法应用于SINS／GPS组合导航系统。仿真结果分析表明，小波分析技术能很好地及时检测出组合导航系统的硬故障，且更加简便灵活，从而可以将小波分析技术应用于组合导航系统的故障检测。     

面向航空智能制造的DT与AI融合应用

针对航空装备复杂制造场景下制造过程管控维度多尺度大、制造资源组成复杂性高、质量问题跟踪定位难度大等问题，结合数字孪生（DT）与人工智能（AI）技术特点，开展了面向航空智能制造的DT与AI融合应用研究。基于数字孪生与人工智能应用现状，系统性地阐述了数字孪生与人工智能融合机理，分析了支撑数字孪生与人工智能融合驱动航空智能制造的关键技术和数字孪生与人工智能融合驱动的AI控制中心构建涉及的关键问题，在此基础上重点讨论了加工制造过程自适应控制、智能车间生产过程智能管控、制造过程资源调度与优化决策、产品智能质量控制等应用场景，为数字孪生与人工智能在航空智能制造融合应用提供参考。     

分布式干扰仿真研究

在简要分析旁瓣对消原理的基础上,通过建模与仿真对多干扰机分布式干扰对抗雷达旁瓣对消的效果进行了分析,结果表明,多干扰机分布式干扰是对抗旁瓣对消的有效技术途径.     

B2C电子商务中信号机制的建立

首先提出双向信息不对称问题是制约B2C电子商务发展的关键,通过对信号传递理论的研究成果进行归纳,总结出建立B2C电子商务中信号机制需要符合的条件,并建立起B2C中信号机制的模型,即企业传递信号—消费者甄别的信号机制和消费者传递信号—企业甄别的信号机制。     

余度数据总线电气隔离度的测试与分析

"余度数据总线电气隔离度测试"是检验在数据总线和余度电缆之间存在电气耦合度的大小.通过对数据总线屏蔽层在接地与不接地状态下的电气隔离度测试,分析了"有传输活动"电缆对"无传输活动"电缆干扰的特征,阐述了电缆屏蔽层的良好接地是确保余度数据总线电气隔离度满足要求的关键.