基于实用参数控制的翼型参数化方法

在翼型的优化设计中,通常要对二元翼型进行参数化方法表示,其目标是利用较少的参数得到足够大的设计空间。分析了Hicks-Henne型函数叠加法和PARSEC几何参数法的特点和不足,提出了利用厚度、弯度等实用参数进行翼型定义的方法,该方法可以通过厚度和弯度参数更加直观地理解翼型轮廓和翼型基本气动性能。通过分析3种方法对5种翼型的最小二乘拟合结果得出结论:实用参数法的误差分布比较平均,且能够比另外两种方法更精确地表示翼型。     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

铝合金含硅量的测定方法

Ｎ２Ｏ－Ｃ２Ｈ２原子吸收光谱法测定卫星系统电池外壳铝合金中的硅含量。讨论了燃烧器高度、燃助比、共振线等测定条件的选择方法，以及酸度、温度和Ｎ２Ｏ－Ｃ２Ｈ２火焰区对测定精度的影响。实际应用证明，该方法灵敏度高，干扰小，选择性和重复性好，并具有操作简便，易掌握，分析周期短等特点；精密度和准确度均能满足卫星系统电池外壳体研制的要求。     

圆截面曲线管道内二次流动的Galerkin解

本文推导了曲线直角坐标系内的Ｎ－Ｓ方程。结果表明Ｇａｌｅｒｋｉｎ方法可以克服摄动法的小参数局限，得到了纯数值法无法求得的增 解析解。     

Aerodynamic optimization design for high pressure turbines based on the adjoint approach

A first study on the continuous adjoint formulation for aerodynamic optimization design of high pressure turbines based on S2surface governed by the Euler equations with source terms is presented.The objective function is defined as an integral function along the boundaries,and the adjoint equations and the boundary conditions are derived by introducing the adjoint variable vectors.The gradient expression of the objective function then includes only the terms related to physical shape variations.The numerical solution of the adjoint equation is conducted by a finitedifference method with the Jameson spatial scheme employing the first and the third order dissipative fluxes.A gradient-based aerodynamic optimization system is established by integrating the blade stagger angles,the stacking lines and the passage perturbation parameterization with the quasi-Newton method of Broyden–Fletcher–Goldfarb–Shanno(BFGS).The application of the continuous adjoint method is validated through a single stage high pressure turbine optimization case.The adiabatic efficiency increases from 0.8875 to 0.8931,whilst the mass flow rate and the pressure ratio remain almost unchanged.The optimization design is shown to reduce the passage vortex loss as well as the mixing loss due to the cooling air injection.     

经纬向传播的甚低频台站信号对太阳耀斑响应特征的差异性分析

为了揭示太阳耀斑发生期间沿着经纬向传播的甚低频台站信号受到扰动的差异性,文章基于随州观测站的甚低频数据,分析了2017年9月8日经向传播的NWC台站信号和纬向传播的JJI台站信号对太阳耀斑的响应特征,比较了两条路径上信号的幅度对同一太阳耀斑响应的异同.结果表明:NWC信号的响应只有先上升再恢复1种,而JJI信号有先上升...     

自由返回轨道的P平面参数快速设计方法

针对自由返回轨道求解过程中地心轨道类型变化造成的B平面参数方法计算失败问题,提出一种基于P平面参数的自由返回轨道快速设计方法。首先,基于轨道半通径参数的普适性,给出了不同轨道类型的P平面参数定义,建立了以P平面参数为求解目标量的自由返回轨道求解模型。其次,给出了基于P平面参数的自由返回轨道快速设计方法,在构建的瞬时地月惯性系下,以平面双二体自由返回轨道作为初值,实现了高精度力模型下的自由返回轨道快速求解。对8种构型自由返回轨道的设计结果表明,P平面参数具有类似于B平面参数的大收敛域,且有效解决了轨道类型变化对计算的影响,可直接应用于中国后续月球探测任务轨道设计。     

超燃冲压发动机燃烧室主动冷却设计研究

超燃冲压发动机燃烧室主动冷却模型制造和热考核试验的费用高昂、周期长,为了降低试验风险,采用三维计算和经济的验证试验相结合的方法开展了超燃冲压发动机燃烧室主动冷却设计。冷却结构基本参数设计和侧壁冷却流动设计是确定设计方案的两大基础,前者采用三维传热计算结合冷却面板传热验证试验完成,后者采用超临界燃料流动三维并行计算结合水流动验证试验完成。在此基础上,经过多轮的结构设计与三维传热及强度计算评估迭代,确定了最终的燃烧室主动冷却结构。设计的主动冷却燃烧室在来流马赫数2.5,总温1700K条件下成功通过200s热考核试验,表明所采用的设计方法、验证试验和计算工具是有效和可信的。     

几种常用格式和湍流模型在高速流动中的适用性研究

针对高超声速飞行器中存在的强激波、激波/边界层干扰、分离、湍流等复杂流动现象,对比分析了当前计算流体力学中的主要空间离散格式及湍流模型,发现不同格式对强激波的分辨率基本相同,Roe和LDE(low diffusion E-CUSP(convective upwind split pressure))格式对摩擦因数和传热系数的模拟优于其他格式;S-A(Spalart-Allmaras)一方程湍流模型计算的摩擦因数比k-ωSST(shear stress transport)两方程湍流模型高10%左右,而后者预测的分离区约为前者的2倍,且分离点靠前.     

端壁附面层抽吸对对转压气机性能的影响

以双级对转压气机为研究对象,通过在两排转子机匣处开设抽吸孔,采用数值方法研究了不同抽吸流量下端壁附面层抽吸对压气机性能的影响,为吸附式压气机优化设计提供参考。计算结果表明:在级环境下端壁附面层抽吸可以提升压气机失速裕度,但抽吸流量过大会对效率造成一定损失,当抽吸1.6%流量时失速裕度提升了3.8%,压气机性能达到最佳;失速主要由间隙泄漏涡引起并首先在第二排转子叶尖发生,抽吸削弱了泄漏涡的强度推迟失速发生;端壁附面层抽吸增大了叶尖流通能力,使转子叶尖效率和压比得到提升,并有效改善了出口导叶流场。