考虑燃料消耗均衡性的低轨通信星座在轨星座构型重构方法研究

针对低轨(low earth orbit,LEO)通信星座在轨重构问题,分析了低轨通信星座的特点,提出了4个重构指标,即全球平均覆盖率、燃料消耗均衡性、重构总时间和重构总速度增量,并分析了提高轨道高度的重构方式.采用基于分解的多目标进化算法(multiobjective evolutionary algorithm b...     

面向月球科研站任务的地月准实时遥操作模拟验证系统设计与关键技术研究

针对月球科研站任务地月遥操作需求和特点,设计地月准实时遥操作模拟验证系统,对其中的关键技术海量多尺度遥感数据环境感知、空地协同高精度定位、基于混合现实的预测仿真等进行了研究。提出了基于海量多尺度遥感数据的联合处理方法,环境感知数据融合可处理米级至厘米级环境感知结果;设计基于空地多运动平台协同定位的原型软件,空地协同地标约束下,定位精度不低于轨道器影像1个像素;开发了带有力觉反馈的预测仿真验证平台,在2~3 s变时延约束下可在仿真环境下协同演示遥操作过程,真实还原从端的遥操作作业场景,提高遥操作的执行效率和安全性。为地面人员的方案设计、操作手训练、故障处置等提供实时支持,为我国未来实施月球科研站任务筑牢基础。     

Area-oriented coordinated trajectory planning of dual-arm space robot for capturing a tumbling target

The growing amount of space debris poses a threat to operational spacecraft and the long-term sustainability of activities in outer space. According to the orbital mechanics, an uncontrolled space object will be tumbling, bringing great challenge to capture and remove it. In this paper, a dual-arm coordinated ‘‘Area-Oriented Capture"(AOC) method is proposed to capture a non-cooperative tumbling target. Firstly, the motion equation of the tumbling target is established, based on which, the dynamic properties are analyzed. Then, the ‘‘Area-Oriented Capture"concept is presented to deal with the problem of large pose(position and attitude) deviation and tumbling motion. An area rather than fixed points/devices is taken as the object to be tracked and captured. As long as the manipulators' end-effectors move to a specified range of the objective areas(not fixed points on the target, but areas), the target satellite will be hugged by the two arms.At last, the proposed method and the traditional method(i.e. fixed-point oriented capture method)are compared and analyzed through simulation. The results show that the proposed method has larger pose tolerance and takes shorter time for capturing a tumbling target.     

Predicting lean blow-off of bluffbody stabilized flames based on Damköhler number

Lean Blow-Off(LBO) prediction is important to propulsion system design. In this paper,a hybrid method combining numerical simulation and Da(Damk?hler) model is proposed based on bluffbody stabilized flames. In the simulated reacting flow, Practical Reaction Zone(PRZ) is built based on OH radical concentration, and it is considered to be the critical zone that controls LBO.Da number is obtained based on the volume-averaged parameters of PRZ. The flow time scale(s_f)indicates the residence time of the fresh mixture flowing through the PRZ. It is obtained based on the characteristic length and volume-averaged axial velocity of the PRZ. The chemical time scale(s_c) indicates the shortest time needed to trigger the reaction of the mixture. It is obtained by commercial software CHEMKIN through monitoring the transient variation of the reactor temperature. The result shows that the average Da number under different LBO conditions is 1.135(the Da number under each LBO condition ranges from 0.673 to 1.351). This indicates that the flow time scale and chemical time scale are comparable. The combustion is in a critical state where LBO is easy to occur. With the increase of the fuel mass flow rate(the global fuel/air ratio increases from 0.004761 to 0.01095), s_f increases from 0.001268 s to 0.007249 s, and s_c decreases from 0.00124 s to0.00089 s. Accordingly, Da number increases from 1.023 to 8.145, which shows that the combustion becomes more stable. The above results show that the method proposed in the present study can properly predict the LBO limits of combustors, which provides important technical supports for combustor design and optimization.     

基于LabVIEW远程校准系统研究

远程校准系统可提高部队的机动计量保障能力，是未来我军计量保障的发展方向。远程校准系统分离了专业计量人员与校准现场，可在任何时间、任何地点实现校准操作。基于LabVIEW开发平台，对系统中客户端、网络传输部分、服务器进行了详细的设计，利用远程校准系统完成了电源Maynuo M8831的远程校准，并自动生成校准结果。该系统操作简单易懂，为部队武器装备的远程校准提供技术支撑。     

仅用作航空器追踪的北斗机载设备适航要求分析

北斗卫星导航系统（简称北斗）在民用航空器中安装应用的前提是明确和符合北斗机载设备的适航要求。但由于全球定位系统（GPS）与北斗在星座结构、信号体制及功能上的不同，导致目前国际上全球卫星导航系统（GNSS）相关适航标准不适用于北斗设备。标准的缺失严重制约北斗民航产业发展，急需进行自主研究与制定。针对北斗在民用航空器中应用第一阶段的功能及场景，即仅用作航空器追踪，分析当前可参考标准的适用性，明确适航要求的制订策略及框架，综合考虑适航安全性、民航对北斗机载设备的紧迫需求，未来机载设备的发展方向，以及当前工业水平，提出一套仅用作航空器追踪的北斗机载设备适航要求，形成审定要素及评审要求，可支持工业方对适航标准的理解。     

GEO长寿命卫星热管在轨等温性能分析

热管是GEO长寿命卫星热控设计大量使用的重要传热元件，其在轨等温传热性能是影响卫星安全可靠工作的关键因素。针对中国在轨长期稳定运行的GEO长寿命卫星热管，基于热管在轨温度遥测数据，采用数理统计方法分析热管在轨等温性能随时间的实际变化规律，分析表明：GEO长寿命卫星热管在轨等温性能稳定性良好，等温性受热管自身温度水平影响较大，年周期内呈现季节性变化，全寿命周期内随飞行时间推移呈现性能衰减下降趋势，寿命末期等温性优于1.6℃，并从热管设计、热负荷大小与分布、使用环境等方面进行等温性改进分析及应用建议。     

一种运载火箭时变结构模态参数辨识的确定性演化方法

针对运载火箭的时变结构模态参数辨识问题进行研究，基于时变自回归滑动平均(TARMA)模型，提出一种时变结构模态参数辨识的确定性演化方法。该方法利用小波基函数的良好局部函数拟合能力，将墨西哥帽小波函数作为TARMA模型时变系数的空间基底，构建了基于小波函数的泛函序列时变自回归滑动平均(FS-TARMA)模型，并发展了两步最小二乘估计方法，实现了时变系数的解耦估计。通过有限单元法，建立了阿里安V号芯级运载火箭时变有限元模型，对所提辨识方法进行了验证，结果表明：墨西哥帽小波基FS-TARMA方法能够有效地辨识系统的时变模态参数；与传统傅里叶基FS-TARMA方法相比，具有更好的辨识精度，并且能够准确地反映出模态局部细节特征。